Journal article · 2015 · Open access

Comparison of silicon oxide and silicon carbide absorber materials in silicon thin-film solar cells

Cordula Walder, Martin Kellermann, E. Wendler, Jura Rensberg, Karsten von Maydell, Carsten Agert

EPJ Photovoltaics, 6, 65302 · Published 20 February 2015 · DOI 10.1051/epjpv/2015003

Free PDFView at the publisherCite this paper

In brief

“Comparison of silicon oxide and silicon carbide absorber materials in silicon thin-film solar cells” is a 2015 journal article by Cordula Walder and 5 co-authors, published in EPJ Photovoltaics. OpenAlex counts 5 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at EPJ Photovoltaics.

Citations
5
Most cited in
2017 (2)
Field-weighted impact
0.70
References
26
Authors
6

Abstract

Since solar energy conversion by photovoltaics is most efficient for photon energies at the bandgap of the absorbing material the idea of combining absorber layers with different bandgaps in a multijunction cell has become popular. In silicon thin-film photovoltaics a multijunction stack with more than two subcells requires a high bandgap amorphous silicon alloy top cell absorber to achieve an optimal bandgap combination. We address the question whether amorphous silicon carbide (a-SiC:H) or amorphous silicon oxide (a-SiO:H) is more suited for this type of top cell absorber. Our single cell results show a better performance of amorphous silicon carbide with respect to fill factor and especially open circuit voltage at equivalent Tauc bandgaps. The microstructure factor of single layers indicates less void structure in amorphous silicon carbide than in amorphous silicon oxide. Yet photoconductivity of silicon oxide films seems to be higher which could be explained by the material being not truly intrinsic. On the other hand better cell performance of amorphous silicon carbide absorber layers might be connected to better hole transport in the cell.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Walder, C., Kellermann, M., Wendler, E., Rensberg, J., von Maydell, K., & Agert, C. (2015). Comparison of silicon oxide and silicon carbide absorber materials in silicon thin-film solar cells. EPJ Photovoltaics, 6, 65302. https://doi.org/10.1051/epjpv/2015003

MLA 9

Walder, Cordula, et al. “Comparison of silicon oxide and silicon carbide absorber materials in silicon thin-film solar cells.” EPJ Photovoltaics, vol. 6, 2015, p. 65302. https://doi.org/10.1051/epjpv/2015003.

Chicago

Walder, Cordula, Martin Kellermann, E. Wendler, Jura Rensberg, Karsten von Maydell, and Carsten Agert. 2015. “Comparison of silicon oxide and silicon carbide absorber materials in silicon thin-film solar cells.” EPJ Photovoltaics 6: 65302. https://doi.org/10.1051/epjpv/2015003.

Harvard

Walder, C. et al. (2015) ‘Comparison of silicon oxide and silicon carbide absorber materials in silicon thin-film solar cells’, EPJ Photovoltaics, 6, p. 65302. doi:10.1051/epjpv/2015003.

IEEE

C. Walder, M. Kellermann, E. Wendler, J. Rensberg, K. von Maydell, and C. Agert, “Comparison of silicon oxide and silicon carbide absorber materials in silicon thin-film solar cells,” EPJ Photovoltaics, vol. 6, p. 65302, 2015, doi: 10.1051/epjpv/2015003.

BibTeX

@article{walder2015comparison,
  title     = {{Comparison of silicon oxide and silicon carbide absorber materials in silicon thin-film solar cells}},
  author    = {Walder, Cordula and Kellermann, Martin and Wendler, E. and Rensberg, Jura and von Maydell, Karsten and Agert, Carsten},
  journal   = {EPJ Photovoltaics},
  year      = {2015},
  volume    = {6},
  pages     = {65302},
  doi       = {10.1051/epjpv/2015003},
  url       = {https://doi.org/10.1051/epjpv/2015003}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201511
201611
201722
201811

Its field-weighted citation impact is 0.70: it has been cited 0.70 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • amorphous silicon carbide
  • amorphous silicon oxide
  • thin-film silicon solar cells
  • multijunction solar cells
  • band gap tuning
  • open-circuit voltage
  • fill factor
  • photoconductivity

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Walder, C., Kellermann, M., Wendler, E., Rensberg, J., von Maydell, K., & Agert, C. (2015). Comparison of silicon oxide and silicon carbide absorber materials in silicon thin-film solar cells. EPJ Photovoltaics, 6, 65302. https://doi.org/10.1051/epjpv/2015003

How many times has this paper been cited?

5 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at EPJ Photovoltaics.

Who wrote this paper?

Cordula Walder, Martin Kellermann, E. Wendler, Jura Rensberg, Karsten von Maydell, Carsten Agert.

What is the DOI of this paper?

10.1051/epjpv/2015003. The permanent link is https://doi.org/10.1051/epjpv/2015003.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.