Journal article · 2021 · Open access
Comparison of mechanical and tribological properties of CrBN coatings modified by Ni or Cu incorporation
Friction, 10(4), 516–529 · Published 9 March 2021 · DOI 10.1007/s40544-020-0475-z
In brief
“Comparison of mechanical and tribological properties of CrBN coatings modified by Ni or Cu incorporation” is a 2021 journal article by Qianzhi Wang and 2 co-authors, published in Friction. OpenAlex counts 18 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Friction.
- Citations
- 18
- Most cited in
- 2023 (6)
- Field-weighted impact
- 1.35
- References
- 38
- Authors
- 3
Abstract
To compare the merits of Ni and Cu, the mechanical and tribological properties of CrBN coatings modified by Ni or Cu incorporation were studied. The results demonstrated that the CrBN-Cu coatings presented a lower friction coefficient than CrBN and CrBN-Ni coatings owing to the improved lubrication effect of the CuO layer originating from the tribochemical reaction. However, the hardness decline due to Cu incorporation was much greater than that of Ni incorporation. Thus, the CrBN-Cu coatings exhibited a higher wear rate than the CrBN coating. In contrast, the plastic deformation enhancement induced by Ni incorporation exceeded the hardness decline. Therefore, the wear of CrBN-Ni coatings partially turned to plastic deformation to present a lower wear rate than that of the CrBN coating.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Wang, Q., Jin, X., & Zhou, F. (2021). Comparison of mechanical and tribological properties of CrBN coatings modified by Ni or Cu incorporation. Friction, 10(4), 516–529. https://doi.org/10.1007/s40544-020-0475-z
MLA 9
Wang, Qianzhi, et al. “Comparison of mechanical and tribological properties of CrBN coatings modified by Ni or Cu incorporation.” Friction, vol. 10, no. 4, 2021, pp. 516–529. https://doi.org/10.1007/s40544-020-0475-z.
Chicago
Wang, Qianzhi, Xuxin Jin, and Fei Zhou. 2021. “Comparison of mechanical and tribological properties of CrBN coatings modified by Ni or Cu incorporation.” Friction 10 (4): 516–529. https://doi.org/10.1007/s40544-020-0475-z.
Harvard
Wang, Q., Jin, X. and Zhou, F. (2021) ‘Comparison of mechanical and tribological properties of CrBN coatings modified by Ni or Cu incorporation’, Friction, 10(4), pp. 516–529. doi:10.1007/s40544-020-0475-z.
IEEE
Q. Wang, X. Jin, and F. Zhou, “Comparison of mechanical and tribological properties of CrBN coatings modified by Ni or Cu incorporation,” Friction, vol. 10, no. 4, pp. 516–529, 2021, doi: 10.1007/s40544-020-0475-z.
BibTeX
@article{wang2021comparison,
title = {{Comparison of mechanical and tribological properties of CrBN coatings modified by Ni or Cu incorporation}},
author = {Wang, Qianzhi and Jin, Xuxin and Zhou, Fei},
journal = {Friction},
year = {2021},
volume = {10},
number = {4},
pages = {516--529},
doi = {10.1007/s40544-020-0475-z},
url = {https://doi.org/10.1007/s40544-020-0475-z}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2021 | 1 | |
| 2022 | 3 | |
| 2023 | 6 | |
| 2024 | 2 | |
| 2025 | 3 | |
| 2026 | 3 |
Its field-weighted citation impact is 1.35: it has been cited 1.35 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- nickel incorporation
- copper incorporation
- tribological properties
- mechanical properties
- friction coefficient
- wear rate
- hardness
- tribochemical reaction
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Wang, Q., Jin, X., & Zhou, F. (2021). Comparison of mechanical and tribological properties of CrBN coatings modified by Ni or Cu incorporation. Friction, 10(4), 516–529. https://doi.org/10.1007/s40544-020-0475-z
How many times has this paper been cited?
18 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Friction: sign in and open the PDF from this page.
Who wrote this paper?
Qianzhi Wang, Xuxin Jin, Fei Zhou.
What is the DOI of this paper?
10.1007/s40544-020-0475-z, permanently at https://doi.org/10.1007/s40544-020-0475-z. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.