Journal article · 2010 · Open access
Comparative Evaluation of Mechanical Properties and Micro Structural Characteristics of 304 Stainless Steel Weldments in TIG and SMAW Welding Processes
International Journal of Current Engineering and Technology, 2(2), 200–206 · Published 1 January 2010 · DOI 10.14741/ijcet/spl.2.2014.36
In brief
“Comparative Evaluation of Mechanical Properties and Micro Structural Characteristics of 304 Stainless Steel Weldments in TIG and SMAW Welding Processes” is a 2010 journal article by G. Karthik, published in International Journal of Current Engineering and Technology. OpenAlex counts 14 citations as of 22 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at International Journal of Current Engineering and Technology.
- Citations
- 14
- Most cited in
- 2025 (3)
- References
- 14
- Authors
- 1
Abstract
Welding technique is one of the widely used permanent fastener techniques, where in different types of welding are used for different applications.Welding creates property changes in the welded location, so it is important to investigate the core mechanical properties after welding to create better designs using welding techniques.In this project the effect of the welding process of Shielded Metal Arc Welding (SMAW) and the relatively Tungsten inert gas welding (TIG) process on 304 Austenitic Stainless steel is studied.The welding process was carried out on 6mm thick plate of 304 Stainless Steel using SMAW and TIG welding processes The two set of plates having the single plate size of 200mmX150mmX6mm were welded using Tungsten Inert Gas welding And Shielded metal arc welding process.This project focuses on tensile property, toughness; micro hardness and micro structure of the each welding process of weld joints are studied and compared with those properties of each process related to the base metal, which shows the better welding process on Stainless Steel.The output variables of SMAW and TIG welding process on 6mm weld plate tensile strengths are compared.The studies indicated that the TIG joints were having better tensile strength than SMAW welded joints on 304stainless steel.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Karthik, G. (2010). Comparative Evaluation of Mechanical Properties and Micro Structural Characteristics of 304 Stainless Steel Weldments in TIG and SMAW Welding Processes. International Journal of Current Engineering and Technology, 2(2), 200–206. https://doi.org/10.14741/ijcet/spl.2.2014.36
MLA 9
Karthik, G. “Comparative Evaluation of Mechanical Properties and Micro Structural Characteristics of 304 Stainless Steel Weldments in TIG and SMAW Welding Processes.” International Journal of Current Engineering and Technology, vol. 2, no. 2, 2010, pp. 200–206. https://doi.org/10.14741/ijcet/spl.2.2014.36.
Chicago
Karthik, G. 2010. “Comparative Evaluation of Mechanical Properties and Micro Structural Characteristics of 304 Stainless Steel Weldments in TIG and SMAW Welding Processes.” International Journal of Current Engineering and Technology 2 (2): 200–206. https://doi.org/10.14741/ijcet/spl.2.2014.36.
Harvard
Karthik, G. (2010) ‘Comparative Evaluation of Mechanical Properties and Micro Structural Characteristics of 304 Stainless Steel Weldments in TIG and SMAW Welding Processes’, International Journal of Current Engineering and Technology, 2(2), pp. 200–206. doi:10.14741/ijcet/spl.2.2014.36.
IEEE
G. Karthik, “Comparative Evaluation of Mechanical Properties and Micro Structural Characteristics of 304 Stainless Steel Weldments in TIG and SMAW Welding Processes,” International Journal of Current Engineering and Technology, vol. 2, no. 2, pp. 200–206, 2010, doi: 10.14741/ijcet/spl.2.2014.36.
BibTeX
@article{karthik2010comparative,
title = {{Comparative Evaluation of Mechanical Properties and Micro Structural Characteristics of 304 Stainless Steel Weldments in TIG and SMAW Welding Processes}},
author = {Karthik, G.},
journal = {International Journal of Current Engineering and Technology},
year = {2010},
volume = {2},
number = {2},
pages = {200--206},
doi = {10.14741/ijcet/spl.2.2014.36},
url = {https://doi.org/10.14741/ijcet/spl.2.2014.36}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2014 | 1 | |
| 2015 | 1 | |
| 2016 | 1 | |
| 2018 | 1 | |
| 2019 | 1 | |
| 2020 | 2 | |
| 2022 | 1 | |
| 2024 | 1 | |
| 2025 | 3 | |
| 2026 | 2 |
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- 304 stainless steel
- TIG welding
- shielded metal arc welding
- mechanical properties of welded joints
- tensile strength
- toughness
- microhardness
- microstructure
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Karthik, G. (2010). Comparative Evaluation of Mechanical Properties and Micro Structural Characteristics of 304 Stainless Steel Weldments in TIG and SMAW Welding Processes. International Journal of Current Engineering and Technology, 2(2), 200–206. https://doi.org/10.14741/ijcet/spl.2.2014.36
How many times has this paper been cited?
14 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at International Journal of Current Engineering and Technology: sign in and open the PDF from this page.
Who wrote this paper?
G. Karthik.
What is the DOI of this paper?
10.14741/ijcet/spl.2.2014.36, permanently at https://doi.org/10.14741/ijcet/spl.2.2014.36. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.