Paper · 2026 · Open access

Comparative assessments of the microstructure-mechanical-corrosion behavior of TIG-welded-304, 309/310, and 316 ASS for marine application

Edgar N. K. Addo, Joshua Tuah Asante, Pearline Ami Newlands, Benjamin Agyei‐Tuffour, Lucas Nana Wiredu Damoah, David Sasu Konadu, Charles Witness Siyasiya

Figshare · Published 18 August 2026 · DOI 10.6084/m9.figshare.33283921

Open full textCite this paper

In brief

“Comparative assessments of the microstructure-mechanical-corrosion behavior of TIG-welded-304, 309/310, and 316 ASS for marine application” is a 2026 paper by Edgar N. K. Addo and 6 co-authors, published in Figshare. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Figshare.

Citations
0
Authors
7

Abstract

This paper presents the experimental and computational results of the comparative study of microstructure, mechanical properties and corrosion behavior of tungsten inert gas (TIG)-welded 304, 309/310, and 316 steels. The study involves the coupled influence of microstructural changes, sensitization tendency, mechanical response, and corrosion behavior under identical welding and environmental conditions. The welding was performed using ∼ 19 V, 200 A, and 1.5 m/min rate, respectively, with 20 l/min argon as a shielding gas. The heat input of 0.57 kJ/mm, arc length of 2.4 mm, medium-cone-electrode tip geometry with 3.2 mm diameter, and torch angle of 70° from the plate were used. The welded joints were characterized and afterwards exposed to a salt spray environment for 100, 200, and 300 h under constant load. Using finite element modeling (FEM), the high-risk failure regions and stress localization trends in the welded geometries were modeled to show the evolving microstructural modification in the different alloys. The results showed that the chromium-rich carbide formation along grain boundaries increased in all welded steels, suggesting varying susceptibility to sensitization, with 304 exhibiting more pronounced localized compositional heterogeneity in selected regions. TIG-welded 309/310 ASS exhibited the highest ultimate tensile strength (∼452 MPa) and yield strength (∼348 MPa), while 316 demonstrated improved resistance to chloride-induced degradation due to its higher molybdenum content. The salt spray conditions revealed time-dependent mass change behavior influenced by oxide film formation and corrosion product accumulation. The FEA results showed that the localization of stress occurred within the weld and gauge-length region, which is qualitatively in agreement with the fracture region of the tensile experiments. The implications of the results indicate a tradeoff between mechanical strengths and corrosion resistance among the studied alloys and are discussed to comparatively show the performance of 304, 309/310, and 316 in stressful and chloride-induced marine environments.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Addo, E. N. K., Asante, J. T., Newlands, P. A., Agyei‐Tuffour, B., Damoah, L. N. W., Konadu, D. S., & Siyasiya, C. W. (2026). Comparative assessments of the microstructure-mechanical-corrosion behavior of TIG-welded-304, 309/310, and 316 ASS for marine application. Figshare. https://doi.org/10.6084/m9.figshare.33283921

MLA 9

Addo, Edgar N. K., et al. “Comparative assessments of the microstructure-mechanical-corrosion behavior of TIG-welded-304, 309/310, and 316 ASS for marine application.” Figshare, 2026. https://doi.org/10.6084/m9.figshare.33283921.

Chicago

Addo, Edgar N. K., Joshua Tuah Asante, Pearline Ami Newlands, Benjamin Agyei‐Tuffour, Lucas Nana Wiredu Damoah, David Sasu Konadu, and Charles Witness Siyasiya. 2026. “Comparative assessments of the microstructure-mechanical-corrosion behavior of TIG-welded-304, 309/310, and 316 ASS for marine application.” Figshare. https://doi.org/10.6084/m9.figshare.33283921.

Harvard

Addo, E. N. K. et al. (2026) ‘Comparative assessments of the microstructure-mechanical-corrosion behavior of TIG-welded-304, 309/310, and 316 ASS for marine application’, Figshare. doi:10.6084/m9.figshare.33283921.

IEEE

E. N. K. Addo et al., “Comparative assessments of the microstructure-mechanical-corrosion behavior of TIG-welded-304, 309/310, and 316 ASS for marine application,” Figshare, 2026, doi: 10.6084/m9.figshare.33283921.

BibTeX

@article{addo2026comparative,
  title     = {{Comparative assessments of the microstructure-mechanical-corrosion behavior of TIG-welded-304, 309/310, and 316 ASS for marine application}},
  author    = {Addo, Edgar N. K. and Asante, Joshua Tuah and Newlands, Pearline Ami and Agyei‐Tuffour, Benjamin and Damoah, Lucas Nana Wiredu and Konadu, David Sasu and Siyasiya, Charles Witness},
  journal   = {Figshare},
  year      = {2026},
  doi       = {10.6084/m9.figshare.33283921},
  url       = {https://doi.org/10.6084/m9.figshare.33283921}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses

  • TIG welding
  • austenitic stainless steel
  • 304 stainless steel
  • 316 stainless steel
  • sensitization
  • grain boundary segregation
  • salt spray corrosion
  • chloride-induced degradation

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Addo, E. N. K., Asante, J. T., Newlands, P. A., Agyei‐Tuffour, B., Damoah, L. N. W., Konadu, D. S., & Siyasiya, C. W. (2026). Comparative assessments of the microstructure-mechanical-corrosion behavior of TIG-welded-304, 309/310, and 316 ASS for marine application. Figshare. https://doi.org/10.6084/m9.figshare.33283921

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Figshare: sign in and open the full text from this page.

Who wrote this paper?

Edgar N. K. Addo, Joshua Tuah Asante, Pearline Ami Newlands, Benjamin Agyei‐Tuffour, Lucas Nana Wiredu Damoah, David Sasu Konadu, Charles Witness Siyasiya.

What is the DOI of this paper?

10.6084/m9.figshare.33283921, permanently at https://doi.org/10.6084/m9.figshare.33283921. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.