Journal article · 2013 · Open access

Comparative analysis between prediction models in codes and test data for shear strength

Francini Hirata, Robles Andrade, João Carlos Della Bella

Revista IBRACON de Estruturas e Materiais, 6(6), 875–902 · Published 1 December 2013 · DOI 10.1590/s1983-41952013000600004

Open PDFView at the publisherCite this paper

In brief

“Comparative analysis between prediction models in codes and test data for shear strength” is a 2013 journal article by Francini Hirata and 2 co-authors, published in Revista IBRACON de Estruturas e Materiais. OpenAlex counts 6 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Revista IBRACON de Estruturas e Materiais.

Citations
6
Most cited in
2020 (2)
Field-weighted impact
0.53
References
71
Authors
3

Abstract

Since the beginning of twentieth century, along with academic publications of Ritter and Mörsch, several studies have been done in order to understand shear strength in reinforced concrete elements. Approximately 1,200 laboratory tests results of reinforced concrete beams under shear stresses were used in a comparative analysis among values from prediction models of codes and laboratory tests results, enabling classification of the codes according to their applicability in several tests intervals. Although the Brazilian Code NBR 6118 (2007) showed good results in usual ranges of parameters, it presented unsatisfactory results on the following cases: low and medium shear transverse reinforcement rate.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Hirata, F., Andrade, R., & Della Bella, J. C. (2013). Comparative analysis between prediction models in codes and test data for shear strength. Revista IBRACON de Estruturas e Materiais, 6(6), 875–902. https://doi.org/10.1590/s1983-41952013000600004

MLA 9

Hirata, Francini, et al. “Comparative analysis between prediction models in codes and test data for shear strength.” Revista IBRACON de Estruturas e Materiais, vol. 6, no. 6, 2013, pp. 875–902. https://doi.org/10.1590/s1983-41952013000600004.

Chicago

Hirata, Francini, Robles Andrade, and João Carlos Della Bella. 2013. “Comparative analysis between prediction models in codes and test data for shear strength.” Revista IBRACON de Estruturas e Materiais 6 (6): 875–902. https://doi.org/10.1590/s1983-41952013000600004.

Harvard

Hirata, F., Andrade, R. and Della Bella, J. C. (2013) ‘Comparative analysis between prediction models in codes and test data for shear strength’, Revista IBRACON de Estruturas e Materiais, 6(6), pp. 875–902. doi:10.1590/s1983-41952013000600004.

IEEE

F. Hirata, R. Andrade, and J. C. Della Bella, “Comparative analysis between prediction models in codes and test data for shear strength,” Revista IBRACON de Estruturas e Materiais, vol. 6, no. 6, pp. 875–902, 2013, doi: 10.1590/s1983-41952013000600004.

BibTeX

@article{hirata2013comparative,
  title     = {{Comparative analysis between prediction models in codes and test data for shear strength}},
  author    = {Hirata, Francini and Andrade, Robles and Della Bella, João Carlos},
  journal   = {Revista IBRACON de Estruturas e Materiais},
  year      = {2013},
  volume    = {6},
  number    = {6},
  pages     = {875--902},
  doi       = {10.1590/s1983-41952013000600004},
  url       = {https://doi.org/10.1590/s1983-41952013000600004}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201611
201811
202022
202111
202511

Its field-weighted citation impact is 0.53: it has been cited 0.53 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete

  • shear strength
  • reinforced concrete beams
  • design code comparison
  • NBR 6118
  • shear reinforcement
  • transverse reinforcement ratio
  • laboratory test data

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Hirata, F., Andrade, R., & Della Bella, J. C. (2013). Comparative analysis between prediction models in codes and test data for shear strength. Revista IBRACON de Estruturas e Materiais, 6(6), 875–902. https://doi.org/10.1590/s1983-41952013000600004

How many times has this paper been cited?

6 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Revista IBRACON de Estruturas e Materiais: sign in and open the PDF from this page.

Who wrote this paper?

Francini Hirata, Robles Andrade, João Carlos Della Bella.

What is the DOI of this paper?

10.1590/s1983-41952013000600004, permanently at https://doi.org/10.1590/s1983-41952013000600004. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.