Dissertation · 2018 · Open access
Comparação da determinação da tenacidade do concreto reforçado com fibras de aço por meio do ensaio de abertura por encunhamento e da ASTM C1609
Universidade Federal de Uberlândia · Published 26 February 2018 · DOI 10.14393/ufu.di.2018.280
In brief
“Comparação da determinação da tenacidade do concreto reforçado com fibras de aço por meio do ensaio de abertura por encunhamento e da ASTM C1609” is a 2018 dissertation by Raphael Dias, published in Universidade Federal de Uberlândia. OpenAlex counts 6 citations as of 22 November 2026. It is open access: the full text is free to read.
- Citations
- 6
- Most cited in
- 2019 (2)
- References
- 38
- Authors
- 1
Abstract
The general objective of the research is to analyze the mechanical behavior, focusing on the tensile strength, of concrete reinforced concrete test bodies with steel fibers, by means of the Elmar K. Tschegg patented aperture test by comparing the results with The values obtained by the method of ASTM C1609. It is also desired to evaluate the influence of the steel fiber content and the compressive strength on the composite toughness. And also contribute with a regulation and control in the application of the material. The experimental program was composed of 112 test specimens (64 cylindrical characterization, 24 prismatic for ASTM C1609 and 24 cubic for encouragement) that were tested in the Structures Laboratory of the Faculty of Civil Engineering of the Federal University of Uberlândia. All specimens were molded and assayed at least 60 days old. After the tests and analysis of the results, it is concluded that the steel fiber gives the concrete an increase in tensile toughness. The strain-hardening behavior of the concrete with a fiber content of 0.64% was also observed. The Wedge Splitting Test presents indications of reproducibility and coherence, when compared with ASTM C1609 (2012), that is, there is a correlation and it is confirmed as an alternative procedure for the technological control of the composite.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Dias, R. (2018). Comparação da determinação da tenacidade do concreto reforçado com fibras de aço por meio do ensaio de abertura por encunhamento e da ASTM C1609. Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2018.280
MLA 9
Dias, Raphael. “Comparação da determinação da tenacidade do concreto reforçado com fibras de aço por meio do ensaio de abertura por encunhamento e da ASTM C1609.” Universidade Federal de Uberlândia, 2018. https://doi.org/10.14393/ufu.di.2018.280.
Chicago
Dias, Raphael. 2018. “Comparação da determinação da tenacidade do concreto reforçado com fibras de aço por meio do ensaio de abertura por encunhamento e da ASTM C1609.” Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2018.280.
Harvard
Dias, R. (2018) ‘Comparação da determinação da tenacidade do concreto reforçado com fibras de aço por meio do ensaio de abertura por encunhamento e da ASTM C1609’, Universidade Federal de Uberlândia. doi:10.14393/ufu.di.2018.280.
IEEE
R. Dias, “Comparação da determinação da tenacidade do concreto reforçado com fibras de aço por meio do ensaio de abertura por encunhamento e da ASTM C1609,” Universidade Federal de Uberlândia, 2018, doi: 10.14393/ufu.di.2018.280.
BibTeX
@phdthesis{dias2018compara,
title = {{Comparação da determinação da tenacidade do concreto reforçado com fibras de aço por meio do ensaio de abertura por encunhamento e da ASTM C1609}},
author = {Dias, Raphael},
year = {2018},
doi = {10.14393/ufu.di.2018.280},
url = {https://doi.org/10.14393/ufu.di.2018.280}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2018 | 1 | |
| 2019 | 2 | |
| 2024 | 2 | |
| 2026 | 1 |
Topic and keywords
Physical Sciences › Engineering › Civil and Structural Engineering › Innovative concrete reinforcement materials
- steel fiber reinforced concrete
- tensile toughness
- wedge splitting test
- steel fiber content
- compressive strength
- strain hardening
- tensile strength
- mechanical characterization
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Dias, R. (2018). Comparação da determinação da tenacidade do concreto reforçado com fibras de aço por meio do ensaio de abertura por encunhamento e da ASTM C1609. Universidade Federal de Uberlândia. https://doi.org/10.14393/ufu.di.2018.280
How many times has this paper been cited?
6 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: sign in and open the PDF from this page.
Who wrote this paper?
Raphael Dias.
What is the DOI of this paper?
10.14393/ufu.di.2018.280, permanently at https://doi.org/10.14393/ufu.di.2018.280. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.