Conference paper · 2023 · Open access

Combined Path Following and Vehicle Stability Control using Model Predictive Control

Daan Lenssen, Alberto Bertipaglia, Felipe Santafe, Barys N. Shyrokau

SAE technical papers on CD-ROM/SAE technical paper series, 1 · Published 11 April 2023 · DOI 10.4271/2023-01-0645

Open PDFView at the publisherCite this paper

In brief

“Combined Path Following and Vehicle Stability Control using Model Predictive Control” is a 2023 conference paper by Daan Lenssen and 3 co-authors, published in SAE technical papers on CD-ROM/SAE technical paper series. OpenAlex counts 11 citations as of 22 November 2026. It is open access: the full text is free to read at Research Repository (Delft University of Technology).

Citations
11
Most cited in
2024 (5)
Field-weighted impact
1.94
References
13
Authors
4

Abstract

This paper presents an innovative combined control using Model Predictive Control (MPC) to enhance the stability of automated vehicles. It integrates path tracking and vehicle stability control into a single controller to satisfy both objectives. The stability enhancement is achieved by computing two expected yaw rates based on the steering wheel angle and on lateral acceleration into the MPC model. The vehicle's stability is determined by comparing the two reference yaw rates to the actual one. Thus, the MPC controller prioritises path tracking or vehicle stability by actively varying the cost function weights depending on the vehicle states. Using two industrial standard manoeuvres, i.e. moose test and double lane change, we demonstrate a significant improvement in path tracking and vehicle stability of the proposed MPC over eight benchmark controllers in the high-fidelity simulation environment. The numerous benchmark controllers use different path tracking and stability control methods to assess each performance benefit. They are split into two groups: the first one uses differential braking in the control output, while the second group can only provide an equal brake torque for the wheels in the same axle. Furthermore, the controller's robustness is evaluated by changing various parameters, e.g. initial vehicle speed, mass and road friction coefficient. The proposed controller keeps the vehicle stable at higher speeds even with varying conditions.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Lenssen, D., Bertipaglia, A., Santafe, F., & Shyrokau, B. N. (2023). Combined Path Following and Vehicle Stability Control using Model Predictive Control. SAE technical papers on CD-ROM/SAE technical paper series, 1. https://doi.org/10.4271/2023-01-0645

MLA 9

Lenssen, Daan, et al. “Combined Path Following and Vehicle Stability Control using Model Predictive Control.” SAE technical papers on CD-ROM/SAE technical paper series, vol. 1, 2023. https://doi.org/10.4271/2023-01-0645.

Chicago

Lenssen, Daan, Alberto Bertipaglia, Felipe Santafe, and Barys N. Shyrokau. 2023. “Combined Path Following and Vehicle Stability Control using Model Predictive Control.” SAE technical papers on CD-ROM/SAE technical paper series 1. https://doi.org/10.4271/2023-01-0645.

Harvard

Lenssen, D. et al. (2023) ‘Combined Path Following and Vehicle Stability Control using Model Predictive Control’, SAE technical papers on CD-ROM/SAE technical paper series, 1. doi:10.4271/2023-01-0645.

IEEE

D. Lenssen, A. Bertipaglia, F. Santafe, and B. N. Shyrokau, “Combined Path Following and Vehicle Stability Control using Model Predictive Control,” SAE technical papers on CD-ROM/SAE technical paper series, vol. 1, 2023, doi: 10.4271/2023-01-0645.

BibTeX

@inproceedings{lenssen2023combined,
  title     = {{Combined Path Following and Vehicle Stability Control using Model Predictive Control}},
  author    = {Lenssen, Daan and Bertipaglia, Alberto and Santafe, Felipe and Shyrokau, Barys N.},
  booktitle = {SAE technical papers on CD-ROM/SAE technical paper series},
  year      = {2023},
  volume    = {1},
  doi       = {10.4271/2023-01-0645},
  url       = {https://doi.org/10.4271/2023-01-0645}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202455
202555
202611

Its field-weighted citation impact is 1.94: it has been cited 1.94 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Automotive Engineering › Vehicle Dynamics and Control Systems

  • model predictive control
  • path following
  • vehicle stability control
  • autonomous vehicles
  • yaw rate control
  • lateral acceleration
  • steering wheel angle
  • cost function weighting

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Lenssen, D., Bertipaglia, A., Santafe, F., & Shyrokau, B. N. (2023). Combined Path Following and Vehicle Stability Control using Model Predictive Control. SAE technical papers on CD-ROM/SAE technical paper series, 1. https://doi.org/10.4271/2023-01-0645

How many times has this paper been cited?

11 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Research Repository (Delft University of Technology): sign in and open the PDF from this page.

Who wrote this paper?

Daan Lenssen, Alberto Bertipaglia, Felipe Santafe, Barys N. Shyrokau.

What is the DOI of this paper?

10.4271/2023-01-0645, permanently at https://doi.org/10.4271/2023-01-0645. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.