Journal article · 2001 · Open access

Cold Model Study on Inclusion Removal from Liquid Steel Using Fine Gas Bubbles.

Jung-soo CHO, Hae-Geon Lee

ISIJ International, 41(2), 151–157 · Published 1 January 2001 · DOI 10.2355/isijinternational.41.151

Open PDFView at the publisherCite this paper

In brief

“Cold Model Study on Inclusion Removal from Liquid Steel Using Fine Gas Bubbles.” is a 2001 journal article by Jung-soo CHO and Hae-Geon Lee, published in ISIJ International. OpenAlex counts 34 citations as of 22 November 2026. It is open access: the full text is free to read at ISIJ International.

Citations
34
Most cited in
2018 (5)
References
8
Authors
2

Abstract

A water model study was undertaken to investigate inclusion removal from liquid steel using fine gas bubbles, which were created by injecting air into a shroud nozzle just underneath the slide gate. The water flow rate was varied in the range of 2.0–3.2 m3 hr-1, which is equivalent to 1.77–2.83 ms-1 of the linear velocity at the exit of the shroud nozzle. The ratio of gas to liquid flow rates was varied in the range of 0–12 % by volume. Polyethylene, PVC and ABS particles were used to imitate the inclusion. The characteristics of the bubble formation varied with the gas inlet position along the shroud: the closer the slide gate, the better the mixing between the gas and liquid phases. This was dependent on the slide gate opening: the smaller the opening, the more turbulence and hence the better mixing of the gas and the liquid. The relative removal efficiency was fairly independent of such variables as liquid flow rate, i.e., linear velocity, the slide gate opening (up to 58% by area), and inclusion concentration. However, this was greatly affected by the wettability, i.e., contact angle of the inclusion with the liquid: the larger the contact angle, the higher the efficiency. It is concluded that the governing factor which determines the removal efficiency of the inclusion from liquid steel is the wettability of the inclusion with the steel, and the idea proposed in the present study should be an effective means for production of clean steels.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

CHO, J.-S., & Lee, H.-G. (2001). Cold Model Study on Inclusion Removal from Liquid Steel Using Fine Gas Bubbles. ISIJ International, 41(2), 151–157. https://doi.org/10.2355/isijinternational.41.151

MLA 9

CHO, Jung-soo, and Hae-Geon Lee. “Cold Model Study on Inclusion Removal from Liquid Steel Using Fine Gas Bubbles.” ISIJ International, vol. 41, no. 2, 2001, pp. 151–157. https://doi.org/10.2355/isijinternational.41.151.

Chicago

CHO, Jung-soo and Hae-Geon Lee. 2001. “Cold Model Study on Inclusion Removal from Liquid Steel Using Fine Gas Bubbles.” ISIJ International 41 (2): 151–157. https://doi.org/10.2355/isijinternational.41.151.

Harvard

CHO, J.-S. and Lee, H.-G. (2001) ‘Cold Model Study on Inclusion Removal from Liquid Steel Using Fine Gas Bubbles.’, ISIJ International, 41(2), pp. 151–157. doi:10.2355/isijinternational.41.151.

IEEE

J.-S. CHO and H.-G. Lee, “Cold Model Study on Inclusion Removal from Liquid Steel Using Fine Gas Bubbles.,” ISIJ International, vol. 41, no. 2, pp. 151–157, 2001, doi: 10.2355/isijinternational.41.151.

BibTeX

@article{cho2001cold,
  title     = {{Cold Model Study on Inclusion Removal from Liquid Steel Using Fine Gas Bubbles.}},
  author    = {CHO, Jung-soo and Lee, Hae-Geon},
  journal   = {ISIJ International},
  year      = {2001},
  volume    = {41},
  number    = {2},
  pages     = {151--157},
  doi       = {10.2355/isijinternational.41.151},
  url       = {https://doi.org/10.2355/isijinternational.41.151}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201522
201611
201733
201855
202022
202122
202222
202355
202422
202511

Topic and keywords

Physical Sciences › Materials Science › Metals and Alloys › Metallurgical Processes and Thermodynamics

  • inclusion removal
  • molten steel
  • bubble injection
  • slide gates
  • gas-liquid mixing
  • wettability
  • contact angle
  • polyethylene particles

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

CHO, J.-S., & Lee, H.-G. (2001). Cold Model Study on Inclusion Removal from Liquid Steel Using Fine Gas Bubbles. ISIJ International, 41(2), 151–157. https://doi.org/10.2355/isijinternational.41.151

How many times has this paper been cited?

34 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at ISIJ International: sign in and open the PDF from this page.

Who wrote this paper?

Jung-soo CHO, Hae-Geon Lee.

What is the DOI of this paper?

10.2355/isijinternational.41.151, permanently at https://doi.org/10.2355/isijinternational.41.151. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.