Journal article · 2021 · Open access
Chemical Composition and Corrosion Behavior of a-C:H/DLC Film-Coated Titanium Substrate in Simulated PEMFC Environment
Coatings, 11(7), 820 · Published 7 July 2021 · DOI 10.3390/coatings11070820
In brief
“Chemical Composition and Corrosion Behavior of a-C:H/DLC Film-Coated Titanium Substrate in Simulated PEMFC Environment” is a 2021 journal article by Beibei Han and 4 co-authors, published in Coatings. OpenAlex counts 14 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Coatings.
- Citations
- 14
- Most cited in
- 2026 (6)
- Field-weighted impact
- 0.29
- References
- 38
- Authors
- 5
Abstract
The amorphous hydrogenated (a-C:H) film-coated titanium, using different CH4/H2 and deposition times, was prepared by the ion beam deposition (IBD) method, which has the advantage of high adhesion because of the graded interface mixes at the atomic level. The chemical characterizations and corrosion behaviors of a-C:H film were investigated and evaluated by SEM, AFM, Raman spectroscopy, EPMA, TEM and XPS. An a-C:H film-coated titanium was corroded at 0.8 V, 90 °C in a 0.5 mol/L H2SO4 solution for 168 h. The metal ion concentration in the H2SO4 corrosion solution and the potentiodynamic polarization behavior were evaluated. Results indicate that a higher CH4/H2 of 1:0 and a deposition time of 12 h can result in a minimum ID/IG ratio of 0.827, Ra of 5.76 nm, metal ion concentration of 0.34 ppm in the corrosion solution and a corrosion current of 0.23 µA/cm2. The current density in this work meets the DOE’s 2020 target of 1 µA/cm2. Electrical conductivity is inversely proportional to the corrosion resistance. The significant improvement in the corrosion resistance of the a-C:H film was mainly attributed to the increased sp3 element and nanocrystalline TiC phase in the penetration layer. As a result, the a-C:H film-coated titanium at CH4/H2 = 1:0 with improved anti-corrosion behavior creates a great potential for PEMFC bipolar plates.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Han, B., Yan, M., Ju, D., Chai, M., & Sato, S. (2021). Chemical Composition and Corrosion Behavior of a-C:H/DLC Film-Coated Titanium Substrate in Simulated PEMFC Environment. Coatings, 11(7), 820. https://doi.org/10.3390/coatings11070820
MLA 9
Han, Beibei, et al. “Chemical Composition and Corrosion Behavior of a-C:H/DLC Film-Coated Titanium Substrate in Simulated PEMFC Environment.” Coatings, vol. 11, no. 7, 2021, p. 820. https://doi.org/10.3390/coatings11070820.
Chicago
Han, Beibei, Mengyuan Yan, Dongying Ju, Maorong Chai, and Susumu Sato. 2021. “Chemical Composition and Corrosion Behavior of a-C:H/DLC Film-Coated Titanium Substrate in Simulated PEMFC Environment.” Coatings 11 (7): 820. https://doi.org/10.3390/coatings11070820.
Harvard
Han, B. et al. (2021) ‘Chemical Composition and Corrosion Behavior of a-C:H/DLC Film-Coated Titanium Substrate in Simulated PEMFC Environment’, Coatings, 11(7), p. 820. doi:10.3390/coatings11070820.
IEEE
B. Han, M. Yan, D. Ju, M. Chai, and S. Sato, “Chemical Composition and Corrosion Behavior of a-C:H/DLC Film-Coated Titanium Substrate in Simulated PEMFC Environment,” Coatings, vol. 11, no. 7, p. 820, 2021, doi: 10.3390/coatings11070820.
BibTeX
@article{han2021chemical,
title = {{Chemical Composition and Corrosion Behavior of a-C:H/DLC Film-Coated Titanium Substrate in Simulated PEMFC Environment}},
author = {Han, Beibei and Yan, Mengyuan and Ju, Dongying and Chai, Maorong and Sato, Susumu},
journal = {Coatings},
year = {2021},
volume = {11},
number = {7},
pages = {820},
doi = {10.3390/coatings11070820},
url = {https://doi.org/10.3390/coatings11070820}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2022 | 2 | |
| 2023 | 1 | |
| 2024 | 1 | |
| 2025 | 4 | |
| 2026 | 6 |
Its field-weighted citation impact is 0.29: it has been cited 0.29 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- hydrogenated amorphous carbon
- titanium substrate
- corrosion resistance
- ion beam deposition
- CH4/H2 ratio
- deposition time
- sulfuric acid corrosion
- potentiodynamic polarization
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Han, B., Yan, M., Ju, D., Chai, M., & Sato, S. (2021). Chemical Composition and Corrosion Behavior of a-C:H/DLC Film-Coated Titanium Substrate in Simulated PEMFC Environment. Coatings, 11(7), 820. https://doi.org/10.3390/coatings11070820
How many times has this paper been cited?
14 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Coatings.
Who wrote this paper?
Beibei Han, Mengyuan Yan, Dongying Ju, Maorong Chai, Susumu Sato.
What is the DOI of this paper?
10.3390/coatings11070820. The permanent link is https://doi.org/10.3390/coatings11070820.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.