Journal article · 2021 · Open access
Characterization of Plasma-deposited a-C:H:Si:F:N Films
Materials Research, 24(suppl 1) · Published 1 January 2021 · DOI 10.1590/1980-5373-mr-2021-0016
In brief
“Characterization of Plasma-deposited a-C:H:Si:F:N Films” is a 2021 journal article by Juliana Feletto Silveira Costa Lopes and 3 co-authors, published in Materials Research. OpenAlex counts 1 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials Research.
- Citations
- 1
- Most cited in
- 2023 (1)
- Field-weighted impact
- 0.11
- References
- 21
- Authors
- 4
Abstract
Thin a-C:H:Si:F:N films were studied as a function of the partial pressure of SF6 in plasma feed, RSF, together with tetramethylsilane and N2. Deposition rates varied from ~4 to ~19 nm.min-1. Surface roughnesses were typically less than 35 nm. Surface contact angles with water droplets, measured using goniometry, were all around 90°. Scanning electron micrography revealed surface particles, probably formed in the gas phase, of typical diameters ~8 μm. As revealed by Fourier transform infrared spectroscopy and energy dispersive x-ray spectroscopy, the films are plasma polymers with a carbon and silicon network. Most of the films contain ~ 60 at.% C, ~ 10 at.% Si, 20 at.% O and ~5 to 14 at.% N. Film doping with F rises to ~2 at.% as RSF is increased. The Tauc gap, calculated from ultraviolet-visible near infrared spectroscopic data, is controllable in the range of ~3.5 to 4.1 eV by a suitable choice of RSF. Fluorination causes the films to be softer and less stiff. Total deformation and stored energies are reduced compared to those of the film deposited at RSF = 0%. The modulus of dissipation increases from ~8% to a maximum of ~65% for the fluorinated films.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Lopes, J. F. S. C., Furquim, F. D. O., Rangel, E. C., & Durrant, S. F. (2021). Characterization of Plasma-deposited a-C:H:Si:F:N Films. Materials Research, 24(suppl 1). https://doi.org/10.1590/1980-5373-mr-2021-0016
MLA 9
Lopes, Juliana Feletto Silveira Costa, et al. “Characterization of Plasma-deposited a-C:H:Si:F:N Films.” Materials Research, vol. 24, no. suppl 1, 2021. https://doi.org/10.1590/1980-5373-mr-2021-0016.
Chicago
Lopes, Juliana Feletto Silveira Costa, Felipe de Oliveira Furquim, Elidiane Cipriano Rangel, and Steven F. Durrant. 2021. “Characterization of Plasma-deposited a-C:H:Si:F:N Films.” Materials Research 24 (suppl 1). https://doi.org/10.1590/1980-5373-mr-2021-0016.
Harvard
Lopes, J. F. S. C. et al. (2021) ‘Characterization of Plasma-deposited a-C:H:Si:F:N Films’, Materials Research, 24(suppl 1). doi:10.1590/1980-5373-mr-2021-0016.
IEEE
J. F. S. C. Lopes, F. D. O. Furquim, E. C. Rangel, and S. F. Durrant, “Characterization of Plasma-deposited a-C:H:Si:F:N Films,” Materials Research, vol. 24, no. suppl 1, 2021, doi: 10.1590/1980-5373-mr-2021-0016.
BibTeX
@article{lopes2021characterization,
title = {{Characterization of Plasma-deposited a-C:H:Si:F:N Films}},
author = {Lopes, Juliana Feletto Silveira Costa and Furquim, Felipe de Oliveira and Rangel, Elidiane Cipriano and Durrant, Steven F.},
journal = {Materials Research},
year = {2021},
volume = {24},
number = {suppl 1},
doi = {10.1590/1980-5373-mr-2021-0016},
url = {https://doi.org/10.1590/1980-5373-mr-2021-0016}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics
- hydrogenated amorphous carbon
- plasma polymer deposition
- tetramethylsilane
- nitrogen
- fluorination
- deposition rate
- surface roughness
- contact angle
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Lopes, J. F. S. C., Furquim, F. D. O., Rangel, E. C., & Durrant, S. F. (2021). Characterization of Plasma-deposited a-C:H:Si:F:N Films. Materials Research, 24(suppl 1). https://doi.org/10.1590/1980-5373-mr-2021-0016
How many times has this paper been cited?
1 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at Materials Research.
Who wrote this paper?
Juliana Feletto Silveira Costa Lopes, Felipe de Oliveira Furquim, Elidiane Cipriano Rangel, Steven F. Durrant.
What is the DOI of this paper?
10.1590/1980-5373-mr-2021-0016. The permanent link is https://doi.org/10.1590/1980-5373-mr-2021-0016.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.