Journal article · 2013 · Open access
Characterisation and Optimisation of Indium Tin Oxide Films Deposited by Pulsed DC Magnetron Sputtering for Heterojunction Silicon Wafer Solar Cell Applications
Energy Procedia, 33, 91–98 · Published 1 January 2013 · DOI 10.1016/j.egypro.2013.05.044
In brief
“Characterisation and Optimisation of Indium Tin Oxide Films Deposited by Pulsed DC Magnetron Sputtering for Heterojunction Silicon Wafer Solar Cell Applications” is a 2013 journal article by Mei Huang and 4 co-authors, published in Energy Procedia. OpenAlex counts 23 citations as of 20 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Energy Procedia.
- Citations
- 23
- Most cited in
- 2018 (4)
- Field-weighted impact
- 1.09
- References
- 13
- Authors
- 5
Abstract
Amorphous/crystalline heterojunction silicon wafer solar cells are attracting attention in recent years due to their potential to achieve high conversion efficiencies at low fabrication temperatures. However, to date, only SANYO (Japan) has brought this technology to commercial mass production, mainly due to the high sensitivity of the solar cell parameters to the growth conditions. One significant difference between a heterojunction and a standard screen- printed silicon wafer solar cell is the current collection scheme. As a heterojunction silicon wafer solar cell is limited by its low emitter lateral conductivity, a transparent conductive oxide (TCO) is employed to improve the carrier transport, whilst also acting as an antireflective coating (ARC) for the front side. From the variety of TCOs, indium tin oxide (ITO) is one of the most promising candidates due to its high electrical conductivity and excellent optical transmittance. For deposition of very thin ITO films (in the 70-90 nm range, in order to function as ARC), the restrictions and requirements for both high electrical and optical properties are rather challenging. In this study we focus on TCO deposition using an industrial pulsed direct current (DC) magnetron sputtering system (FHR, Germany). The effects of the applied DC power, the oxygen partial pressure, the deposition temperature, and the annealing conditions are investigated. Encouraging results demonstrate a resistivity in the range of (4.6-5)x10-4 Ωcm and a transmission of above 90% in the visible range.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Huang, M., Hameiri, Z., Venkataraj, S., Aberle, A. G., & Mueller, T. (2013). Characterisation and Optimisation of Indium Tin Oxide Films Deposited by Pulsed DC Magnetron Sputtering for Heterojunction Silicon Wafer Solar Cell Applications. Energy Procedia, 33, 91–98. https://doi.org/10.1016/j.egypro.2013.05.044
MLA 9
Huang, Mei, et al. “Characterisation and Optimisation of Indium Tin Oxide Films Deposited by Pulsed DC Magnetron Sputtering for Heterojunction Silicon Wafer Solar Cell Applications.” Energy Procedia, vol. 33, 2013, pp. 91–98. https://doi.org/10.1016/j.egypro.2013.05.044.
Chicago
Huang, Mei, Ziv Hameiri, Selvaraj Venkataraj, Armin Gerhard Aberle, and Thomas Mueller. 2013. “Characterisation and Optimisation of Indium Tin Oxide Films Deposited by Pulsed DC Magnetron Sputtering for Heterojunction Silicon Wafer Solar Cell Applications.” Energy Procedia 33: 91–98. https://doi.org/10.1016/j.egypro.2013.05.044.
Harvard
Huang, M. et al. (2013) ‘Characterisation and Optimisation of Indium Tin Oxide Films Deposited by Pulsed DC Magnetron Sputtering for Heterojunction Silicon Wafer Solar Cell Applications’, Energy Procedia, 33, pp. 91–98. doi:10.1016/j.egypro.2013.05.044.
IEEE
M. Huang, Z. Hameiri, S. Venkataraj, A. G. Aberle, and T. Mueller, “Characterisation and Optimisation of Indium Tin Oxide Films Deposited by Pulsed DC Magnetron Sputtering for Heterojunction Silicon Wafer Solar Cell Applications,” Energy Procedia, vol. 33, pp. 91–98, 2013, doi: 10.1016/j.egypro.2013.05.044.
BibTeX
@article{huang2013characterisation,
title = {{Characterisation and Optimisation of Indium Tin Oxide Films Deposited by Pulsed DC Magnetron Sputtering for Heterojunction Silicon Wafer Solar Cell Applications}},
author = {Huang, Mei and Hameiri, Ziv and Venkataraj, Selvaraj and Aberle, Armin Gerhard and Mueller, Thomas},
journal = {Energy Procedia},
year = {2013},
volume = {33},
pages = {91--98},
doi = {10.1016/j.egypro.2013.05.044},
url = {https://doi.org/10.1016/j.egypro.2013.05.044}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2015 | 3 | |
| 2017 | 2 | |
| 2018 | 4 | |
| 2020 | 3 | |
| 2021 | 2 | |
| 2022 | 3 | |
| 2023 | 1 | |
| 2024 | 3 | |
| 2025 | 2 |
Its field-weighted citation impact is 1.09: it has been cited 1.09 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Thin-Film Transistor Technologies
- indium tin oxide
- transparent conducting oxides
- pulsed DC magnetron sputtering
- silicon heterojunction solar cells
- antireflection coatings
- thin film deposition
- electrical resistivity
- optical transmittance
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Huang, M., Hameiri, Z., Venkataraj, S., Aberle, A. G., & Mueller, T. (2013). Characterisation and Optimisation of Indium Tin Oxide Films Deposited by Pulsed DC Magnetron Sputtering for Heterojunction Silicon Wafer Solar Cell Applications. Energy Procedia, 33, 91–98. https://doi.org/10.1016/j.egypro.2013.05.044
How many times has this paper been cited?
23 times, according to OpenAlex on 20 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Energy Procedia: sign in and open the PDF from this page.
Who wrote this paper?
Mei Huang, Ziv Hameiri, Selvaraj Venkataraj, Armin Gerhard Aberle, Thomas Mueller.
What is the DOI of this paper?
10.1016/j.egypro.2013.05.044, permanently at https://doi.org/10.1016/j.egypro.2013.05.044. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 20 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.