Paper · 2013 · Open access

CFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor

Mohammad Golshadi, Reza Mosayebi Behbahani, Mohammad Reza Irani

DOAJ (DOAJ: Directory of Open Access Journals) · Published 1 April 2013 · DOI 10.22050/ijogst.2013.3537

Open full textView at the publisherCite this paper

In brief

“CFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor” is a 2013 paper by Mohammad Golshadi and 2 co-authors, published in DOAJ (DOAJ: Directory of Open Access Journals). OpenAlex counts 6 citations as of 19 November 2026. It is open access under a CC BY-SA licence: the full text is free to read at DOAJ (DOAJ: Directory of Open Access Journals).

Citations
6
Most cited in
2017 (2)
Field-weighted impact
0.27
References
33
Authors
3

Abstract

A computational fluid dynamic (CFD) study of methanol (MeOH) to dimethyl ether (DME) process in an adiabatic fixed-bed reactor is presented. One of the methods of industrial DME production is the catalytic dehydration of MeOH. Kinetic model was derived based on Bercic rate. The parameters of this equation for a specific catalyst were tuned by solving a one-dimensional homogenous model using MATLAB optimization module. A two-dimensional CFD simulation of the reaction is demonstrated and considered as numerical experiments. A sensitivity analysis was run in order to find the effect of temperature, pressure, and WHSV on the reactor performance. Good agreement was achieved between bench experimental data and the model. The results show that the maximum conversion of reaction (about 85.03%) is obtained at WHSV=10 h-1 and T=563.15 K, whereas the inlet temperature has a greater effect on methanol conversion. Moreover, the effect of water in inlet feed on methanol conversion is quantitatively studied. It was concluded that the results obtained from CFD analysis give precise guidelines for further studies on the optimization of reactor performance.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Golshadi, M., Behbahani, R. M., & Irani, M. R. (2013). CFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor. DOAJ (DOAJ: Directory of Open Access Journals). https://doi.org/10.22050/ijogst.2013.3537

MLA 9

Golshadi, Mohammad, et al. “CFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor.” DOAJ (DOAJ: Directory of Open Access Journals), 2013. https://doi.org/10.22050/ijogst.2013.3537.

Chicago

Golshadi, Mohammad, Reza Mosayebi Behbahani, and Mohammad Reza Irani. 2013. “CFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor.” DOAJ (DOAJ: Directory of Open Access Journals). https://doi.org/10.22050/ijogst.2013.3537.

Harvard

Golshadi, M., Behbahani, R. M. and Irani, M. R. (2013) ‘CFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor’, DOAJ (DOAJ: Directory of Open Access Journals). doi:10.22050/ijogst.2013.3537.

IEEE

M. Golshadi, R. M. Behbahani, and M. R. Irani, “CFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor,” DOAJ (DOAJ: Directory of Open Access Journals), 2013, doi: 10.22050/ijogst.2013.3537.

BibTeX

@article{golshadi2013simulation,
  title     = {{CFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor}},
  author    = {Golshadi, Mohammad and Behbahani, Reza Mosayebi and Irani, Mohammad Reza},
  journal   = {DOAJ (DOAJ: Directory of Open Access Journals)},
  year      = {2013},
  doi       = {10.22050/ijogst.2013.3537},
  url       = {https://doi.org/10.22050/ijogst.2013.3537}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201511
201722
201811
202222

Its field-weighted citation impact is 0.27: it has been cited 0.27 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Computational Mechanics › Heat and Mass Transfer in Porous Media

  • dimethyl ether synthesis
  • methanol dehydration
  • adiabatic fixed-bed reactor
  • kinetic modeling
  • sensitivity analysis
  • space velocity
  • methanol conversion

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Golshadi, M., Behbahani, R. M., & Irani, M. R. (2013). CFD Simulation of Dimethyl Ether Synthesis from Methanol in an Adiabatic Fixed-bed Reactor. DOAJ (DOAJ: Directory of Open Access Journals). https://doi.org/10.22050/ijogst.2013.3537

How many times has this paper been cited?

6 times, according to OpenAlex on 19 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at DOAJ (DOAJ: Directory of Open Access Journals): sign in and open the full text from this page.

Who wrote this paper?

Mohammad Golshadi, Reza Mosayebi Behbahani, Mohammad Reza Irani.

What is the DOI of this paper?

10.22050/ijogst.2013.3537, permanently at https://doi.org/10.22050/ijogst.2013.3537. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 19 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.