Preprint · 2026 · Open access

Catalytic precursor dissociation in Hot-Wire CVD and comparing a-Si:H growth under continuous and pulsed silane flow conditions

Swati Goyal, Karam Veer Singh, Rajiv Onkar Dusane, Triratna Muneshwar

arXiv (Cornell University) · Published 30 May 2026 · DOI 10.48550/arxiv.2606.00788

Free PDFView at the publisherCite this paper

In brief

“Catalytic precursor dissociation in Hot-Wire CVD and comparing a-Si:H growth under continuous and pulsed silane flow conditions” is a 2026 preprint by Swati Goyal and 3 co-authors, published in arXiv (Cornell University). OpenAlex counts 0 citations as of 16 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at arXiv (Cornell University).

Citations
0
Authors
4

Abstract

Hot-wire Chemical vapor deposition (HWCVD) of hydrogenated amorphous silicon (a-Si:H) thin films utilizes the dissociation of silane (SiH4) precursor over heated tungsten or tantalum filaments (\geq 1600 °C). In this work, assuming catalytic dissociation mechanism, we present kinetic model for SiH4 dissociation and the resulting a-Si:H film growth. Our model calculations showed that for an identical dose of the introduced SiH4 precursor, a-Si:H thickness was considerably higher for the pulsed SiH4 flow as compared to the continuous SiH4 flow. The pulsed SiH4 flow is represented by time intervals t_ON and t_OFF, where the SiH4 flow rate (F_(SiH_4)) is at the set-point and zero, respectively. In agreement with our model calculations for an introduced 75 cm^3 (STP) SiH4 dose, the resulting a-Si:H film thickness was 175 \pm 5 nm under continuous precursor flow, whereas it considerably increased to 425 \pm 8 nm when this SiH4 dose was split into 15 shorter pulses (t_ON =15s ; t_OFF = 60s). Moreover, these a-Si:H films deposited using pulsed SiH4 flow exhibited improved electrical properties, with a dark conductivity ({σ_d}) of 1.1 \times 10^-11 S/cm and a photoconductivity ({σ_ph}) of \sim 5.8 \times 10^-5 S/cm, compared to films deposited under continuous SiH4 flow (σ_d \sim 2.5 \times 10^-10 S/cm and σ_ph \sim 3.5 \times 10^-6 S/cm).

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Goyal, S., Singh, K. V., Dusane, R. O., & Muneshwar, T. (2026). Catalytic precursor dissociation in Hot-Wire CVD and comparing a-Si:H growth under continuous and pulsed silane flow conditions. arXiv (Cornell University). https://doi.org/10.48550/arxiv.2606.00788

MLA 9

Goyal, Swati, et al. “Catalytic precursor dissociation in Hot-Wire CVD and comparing a-Si:H growth under continuous and pulsed silane flow conditions.” arXiv (Cornell University), 2026. https://doi.org/10.48550/arxiv.2606.00788.

Chicago

Goyal, Swati, Karam Veer Singh, Rajiv Onkar Dusane, and Triratna Muneshwar. 2026. “Catalytic precursor dissociation in Hot-Wire CVD and comparing a-Si:H growth under continuous and pulsed silane flow conditions.” arXiv (Cornell University). https://doi.org/10.48550/arxiv.2606.00788.

Harvard

Goyal, S. et al. (2026) ‘Catalytic precursor dissociation in Hot-Wire CVD and comparing a-Si:H growth under continuous and pulsed silane flow conditions’, arXiv (Cornell University). doi:10.48550/arxiv.2606.00788.

IEEE

S. Goyal, K. V. Singh, R. O. Dusane, and T. Muneshwar, “Catalytic precursor dissociation in Hot-Wire CVD and comparing a-Si:H growth under continuous and pulsed silane flow conditions,” arXiv (Cornell University), 2026, doi: 10.48550/arxiv.2606.00788.

BibTeX

@misc{goyal2026catalytic,
  title     = {{Catalytic precursor dissociation in Hot-Wire CVD and comparing a-Si:H growth under continuous and pulsed silane flow conditions}},
  author    = {Goyal, Swati and Singh, Karam Veer and Dusane, Rajiv Onkar and Muneshwar, Triratna},
  howpublished = {arXiv (Cornell University)},
  year      = {2026},
  doi       = {10.48550/arxiv.2606.00788},
  url       = {https://doi.org/10.48550/arxiv.2606.00788}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Thin-Film Transistor Technologies

  • hot filament chemical vapor deposition
  • hydrogenated amorphous silicon
  • thin film growth kinetics
  • film thickness
  • dark conductivity
  • photoconductivity
  • tungsten filament
  • tantalum filament

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Goyal, S., Singh, K. V., Dusane, R. O., & Muneshwar, T. (2026). Catalytic precursor dissociation in Hot-Wire CVD and comparing a-Si:H growth under continuous and pulsed silane flow conditions. arXiv (Cornell University). https://doi.org/10.48550/arxiv.2606.00788

How many times has this paper been cited?

0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at arXiv (Cornell University).

Who wrote this paper?

Swati Goyal, Karam Veer Singh, Rajiv Onkar Dusane, Triratna Muneshwar.

What is the DOI of this paper?

10.48550/arxiv.2606.00788. The permanent link is https://doi.org/10.48550/arxiv.2606.00788.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.