Journal article · 2018 · Open access
Catalytic activities and resistance to HCl poisoning of Ni-based catalysts during steam reforming of naphthalene
Applied Catalysis A General, 557, 25–38 · Published 12 March 2018 · DOI 10.1016/j.apcata.2018.03.005
In brief
“Catalytic activities and resistance to HCl poisoning of Ni-based catalysts during steam reforming of naphthalene” is a 2018 journal article by Andrei Veksha and 5 co-authors, published in Applied Catalysis A General. OpenAlex counts 48 citations as of 18 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read at Applied Catalysis A General.
- Citations
- 48
- Most cited in
- 2020 (10)
- Field-weighted impact
- 1.17
- References
- 48
- Authors
- 6
Abstract
Hydrogen chloride is commonly present in syngas produced from municipal solid waste and biomass gasification. The influence of HCl on the activity of nickel-based catalysts during catalytic naphthalene reforming was investigated. Two synthesized and two commercial catalysts were tested for steam reforming at 790 °C and SV 24,000 h−1. In the absence of HCl, nickel supported on limestone (Ni/Limestone) demonstrated lower naphthalene conversion (∼80%) compared to nickel supported on alumina (Ni/Alumina) and two commercial alumina supported catalysts (∼100%). In the presence of 2000 ppmv HCl, the naphthalene conversion of Ni/Limestone rapidly decreased due to the reaction with HCl and, probably, formation of molten CaCl2 deactivating the supported Ni nanoparticles. These data demonstrate limited applicability of calcium-based nickel catalysts for naphthalene reforming at the studied temperature. The efficiencies of Ni/Alumina and two commercial catalysts were maintained at ∼100% naphthalene conversion. However, HCl concentrations of 500–2000 ppmv had detrimental effect on water-gas shift activity of alumina supported catalysts during naphthalene reforming. The spent alumina supported catalysts were characterized by N2 adsorption, FESEM/EDS, XRD, XPS, TPR and TEM after the reforming in the absence and presence of HCl, and the results suggested that HCl increased nickel sintering in the catalysts causing the loss of water-gas shift activity. The losses of catalytic activity varied among the catalysts and were the lowest for Ni/Alumina, which contained nanosized porous alumina support and had the strongest Ni nanoparticle-support interactions.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Veksha, A., Giannis, A., Oh, W., Chang, V. W.-C., Lisak, G., & Lim, T. (2018). Catalytic activities and resistance to HCl poisoning of Ni-based catalysts during steam reforming of naphthalene. Applied Catalysis A General, 557, 25–38. https://doi.org/10.1016/j.apcata.2018.03.005
MLA 9
Veksha, Andrei, et al. “Catalytic activities and resistance to HCl poisoning of Ni-based catalysts during steam reforming of naphthalene.” Applied Catalysis A General, vol. 557, 2018, pp. 25–38. https://doi.org/10.1016/j.apcata.2018.03.005.
Chicago
Veksha, Andrei, Apostolos Giannis, Wen‐Da Oh, Victor W.-C. Chang, Grzegorz Lisak, and Teik‐Thye Lim. 2018. “Catalytic activities and resistance to HCl poisoning of Ni-based catalysts during steam reforming of naphthalene.” Applied Catalysis A General 557: 25–38. https://doi.org/10.1016/j.apcata.2018.03.005.
Harvard
Veksha, A. et al. (2018) ‘Catalytic activities and resistance to HCl poisoning of Ni-based catalysts during steam reforming of naphthalene’, Applied Catalysis A General, 557, pp. 25–38. doi:10.1016/j.apcata.2018.03.005.
IEEE
A. Veksha, A. Giannis, W. Oh, V. W.-C. Chang, G. Lisak, and T. Lim, “Catalytic activities and resistance to HCl poisoning of Ni-based catalysts during steam reforming of naphthalene,” Applied Catalysis A General, vol. 557, pp. 25–38, 2018, doi: 10.1016/j.apcata.2018.03.005.
BibTeX
@article{veksha2018catalytic,
title = {{Catalytic activities and resistance to HCl poisoning of Ni-based catalysts during steam reforming of naphthalene}},
author = {Veksha, Andrei and Giannis, Apostolos and Oh, Wen‐Da and Chang, Victor W.-C. and Lisak, Grzegorz and Lim, Teik‐Thye},
journal = {Applied Catalysis A General},
year = {2018},
volume = {557},
pages = {25--38},
doi = {10.1016/j.apcata.2018.03.005},
url = {https://doi.org/10.1016/j.apcata.2018.03.005}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2018 | 3 | |
| 2019 | 3 | |
| 2020 | 10 | |
| 2021 | 5 | |
| 2022 | 8 | |
| 2023 | 1 | |
| 2024 | 5 | |
| 2025 | 3 | |
| 2026 | 10 |
Its field-weighted citation impact is 1.17: it has been cited 1.17 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Chemical Engineering › Catalysis › Catalysts for Methane Reforming
- hydrogen production
- nickel catalysts
- catalyst deactivation
- alumina-supported nickel
- nickel sintering
- municipal solid waste gasification
- biomass gasification
- syngas
Work with this paper
Most-cited papers in Chemical Engineering
- Viscoelastic Properties of PolymersJohn D. Ferry, Henry S. Myers · Journal of The Electrochemical Society · 1961 · 13,517 citations
- Chemical Reaction EngineeringOctave Levenspiel · Industrial & Engineering Chemistry Research · 1999 · 10,032 citations
- The theory of polymer dynamicsMasao Doi, Sam F Edwards · 1986 · 8,928 citations
- Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and EngineeringGeorge W. Huber, Sara Iborra, Avelino Corma · Chemical Reviews · 2006 · 7,825 citations
- Convective Transport in NanofluidsJacopo Buongiorno · ASME Journal of Heat and Mass Transfer · 2005 · 7,131 citations
Questions about this paper
How do I cite this paper in APA style?
Veksha, A., Giannis, A., Oh, W., Chang, V. W.-C., Lisak, G., & Lim, T. (2018). Catalytic activities and resistance to HCl poisoning of Ni-based catalysts during steam reforming of naphthalene. Applied Catalysis A General, 557, 25–38. https://doi.org/10.1016/j.apcata.2018.03.005
How many times has this paper been cited?
48 times, according to OpenAlex on 18 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Applied Catalysis A General: sign in and open the PDF from this page.
Who wrote this paper?
Andrei Veksha, Apostolos Giannis, Wen‐Da Oh, Victor W.-C. Chang, Grzegorz Lisak, Teik‐Thye Lim.
What is the DOI of this paper?
10.1016/j.apcata.2018.03.005, permanently at https://doi.org/10.1016/j.apcata.2018.03.005. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 18 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.