Conference paper · 2017 · Open access

CARACTERIZAÇÃO DE UM AÇO INOXIDÁVEL DUPLEX EM COMPARAÇÃO A AÇOS INOXIDÁVEIS FERRITICOS E AUSTENÍTICOS EM RELAÇÃO À MICROESTRUTURA E PROPRIEDADES MECÂNICAS EM TRAÇÃO

Marcela Alves Silva, Beatriz Araújo Batista, Luana Araújo Batista

Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas (ENEMET), 1571–1576 · Published 1 September 2017 · DOI 10.5151/1516-392x-27725

Open PDFView at the publisherCite this paper

In brief

“CARACTERIZAÇÃO DE UM AÇO INOXIDÁVEL DUPLEX EM COMPARAÇÃO A AÇOS INOXIDÁVEIS FERRITICOS E AUSTENÍTICOS EM RELAÇÃO À MICROESTRUTURA E PROPRIEDADES MECÂNICAS EM TRAÇÃO” is a 2017 conference paper by Marcela Alves Silva and 2 co-authors, published in Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas (ENEMET). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas (ENEMET).

Citations
0
Authors
3

Abstract

Aços inoxidáveis são ligas Fe-C-Cr com elevada resistência à corrosão.Estes podem receber diferentes elementos de liga, que alteram suas microestruturas e propriedades de acordo com o interesse da aplicação.Os mais comuns são os austeníticos, ferríticos, martensíticos e duplex.Os aços inoxidáveis austeníticos possuem excelente resistência à corrosão, elevada ductilidade, boa soldabilidade, conformabilidade e tenacidade.Os aços inoxidáveis ferríticos possuem boa resistência à corrosão, são bons para estampagem e possuem maior dureza e soldabilidade em relação aos austeníticos.Os aços inoxidáveis duplex (AID) são aços com estrutura bifásica, formados pelas fases ferrita e austenita, em proporções de aproximadamente 50% de cada.Os AIDs apresentam associação de resistência mecânica com resistência à corrosão.O presente trabalho tem como objetivo realizar ensaios metalográficos e tração de um AID 399B, de um aço inoxidável ferrítico 441A e de um aço inoxidável austenítico 304N, para fins de comparação da microestrutura e propriedades mecânicas.Com os resultados conclui-se que o AID possui maior resistência à dureza na escala HRB, o aço austenítico possui maior capacidade de alongamento, devido sua estrutura CFC.Já o limite de resistência e de escoamento são maiores no aço AID devido a sua maior proporção da fase ferrita (52%).

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Silva, M. A., Batista, B. A., & Batista, L. A. (2017). CARACTERIZAÇÃO DE UM AÇO INOXIDÁVEL DUPLEX EM COMPARAÇÃO A AÇOS INOXIDÁVEIS FERRITICOS E AUSTENÍTICOS EM RELAÇÃO À MICROESTRUTURA E PROPRIEDADES MECÂNICAS EM TRAÇÃO. Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas (ENEMET), 1571–1576. https://doi.org/10.5151/1516-392x-27725

MLA 9

Silva, Marcela Alves, et al. “CARACTERIZAÇÃO DE UM AÇO INOXIDÁVEL DUPLEX EM COMPARAÇÃO A AÇOS INOXIDÁVEIS FERRITICOS E AUSTENÍTICOS EM RELAÇÃO À MICROESTRUTURA E PROPRIEDADES MECÂNICAS EM TRAÇÃO.” Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas (ENEMET), 2017, pp. 1571–1576. https://doi.org/10.5151/1516-392x-27725.

Chicago

Silva, Marcela Alves, Beatriz Araújo Batista, and Luana Araújo Batista. 2017. “CARACTERIZAÇÃO DE UM AÇO INOXIDÁVEL DUPLEX EM COMPARAÇÃO A AÇOS INOXIDÁVEIS FERRITICOS E AUSTENÍTICOS EM RELAÇÃO À MICROESTRUTURA E PROPRIEDADES MECÂNICAS EM TRAÇÃO.” Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas (ENEMET): 1571–1576. https://doi.org/10.5151/1516-392x-27725.

Harvard

Silva, M. A., Batista, B. A. and Batista, L. A. (2017) ‘CARACTERIZAÇÃO DE UM AÇO INOXIDÁVEL DUPLEX EM COMPARAÇÃO A AÇOS INOXIDÁVEIS FERRITICOS E AUSTENÍTICOS EM RELAÇÃO À MICROESTRUTURA E PROPRIEDADES MECÂNICAS EM TRAÇÃO’, Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas (ENEMET), pp. 1571–1576. doi:10.5151/1516-392x-27725.

IEEE

M. A. Silva, B. A. Batista, and L. A. Batista, “CARACTERIZAÇÃO DE UM AÇO INOXIDÁVEL DUPLEX EM COMPARAÇÃO A AÇOS INOXIDÁVEIS FERRITICOS E AUSTENÍTICOS EM RELAÇÃO À MICROESTRUTURA E PROPRIEDADES MECÂNICAS EM TRAÇÃO,” Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas (ENEMET), pp. 1571–1576, 2017, doi: 10.5151/1516-392x-27725.

BibTeX

@inproceedings{silva2017caracteriza,
  title     = {{CARACTERIZAÇÃO DE UM AÇO INOXIDÁVEL DUPLEX EM COMPARAÇÃO A AÇOS INOXIDÁVEIS FERRITICOS E AUSTENÍTICOS EM RELAÇÃO À MICROESTRUTURA E PROPRIEDADES MECÂNICAS EM TRAÇÃO}},
  author    = {Silva, Marcela Alves and Batista, Beatriz Araújo and Batista, Luana Araújo},
  booktitle = {Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas (ENEMET)},
  year      = {2017},
  pages     = {1571--1576},
  doi       = {10.5151/1516-392x-27725},
  url       = {https://doi.org/10.5151/1516-392x-27725}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Microstructure and Mechanical Properties of Steels

  • duplex stainless steel
  • ferritic stainless steel
  • austenitic stainless steel
  • microstructure
  • tensile properties
  • hardness
  • yield strength
  • ultimate tensile strength

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Silva, M. A., Batista, B. A., & Batista, L. A. (2017). CARACTERIZAÇÃO DE UM AÇO INOXIDÁVEL DUPLEX EM COMPARAÇÃO A AÇOS INOXIDÁVEIS FERRITICOS E AUSTENÍTICOS EM RELAÇÃO À MICROESTRUTURA E PROPRIEDADES MECÂNICAS EM TRAÇÃO. Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas (ENEMET), 1571–1576. https://doi.org/10.5151/1516-392x-27725

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Encontro Nacional de Estudantes de Engenharia Metalúrgica, de Materiais e de Minas (ENEMET): sign in and open the PDF from this page.

Who wrote this paper?

Marcela Alves Silva, Beatriz Araújo Batista, Luana Araújo Batista.

What is the DOI of this paper?

10.5151/1516-392x-27725, permanently at https://doi.org/10.5151/1516-392x-27725. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.