Journal article · 2013 · Open access

Behaviour of NiTi SMA Helical Springs under Different Temperatures and Deflections

R. Santhanam, Y. Krishna, M S Sivakumar

ISRN Materials Science, 2013, 1–4 · Published 11 July 2013 · DOI 10.1155/2013/320370

Open PDFView at the publisherCite this paper

In brief

“Behaviour of NiTi SMA Helical Springs under Different Temperatures and Deflections” is a 2013 journal article by R. Santhanam and 2 co-authors, published in ISRN Materials Science. OpenAlex counts 6 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at ISRN Materials Science.

Citations
6
Most cited in
2025 (2)
Field-weighted impact
0.12
References
6
Authors
3

Abstract

Shape memory alloys (SMAs) are one of the most widely used smart materials in many applications because of their shape memory effect property. In this work, the behaviour of NiTi SMA helical spring was evaluated through isothermal force-displacement experiment (IFDE) and shape recovery force experiment (SRFE). The transformation temperatures of SMA spring were determined by differential scanning calorimetry (DSC) test. In situ heating of SMA spring by direct electric current was used instead of conventional furnace heating. The continuous measurement of temperature of SMA spring during heating and cooling was ensured with attaching the thermocouple by heat shrinkable sleeve. From IFDE, the force-deflection behaviour under different constant temperatures and from SRFE and the force-temperature behaviour under different constant deflections are obtained. The results of IFDE show that the force increases and the residual displacement decreases with an increase in the temperature, and the stiffness of the spring at austenite state is greater than that at martensitic state. The results of SRFE show that the shape recovery force increases more or less linearly with an increase in the initial deflection for the same temperature range. But the shape recovery forces are not similar during heating and cooling stages. This paper presents the experimental setup, experimental procedures, and the observed behaviour of SMA helical springs under different temperatures and deflections.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Santhanam, R., Krishna, Y., & Sivakumar, M. S. (2013). Behaviour of NiTi SMA Helical Springs under Different Temperatures and Deflections. ISRN Materials Science, 2013, 1–4. https://doi.org/10.1155/2013/320370

MLA 9

Santhanam, R., et al. “Behaviour of NiTi SMA Helical Springs under Different Temperatures and Deflections.” ISRN Materials Science, vol. 2013, 2013, pp. 1–4. https://doi.org/10.1155/2013/320370.

Chicago

Santhanam, R., Y. Krishna, and M S Sivakumar. 2013. “Behaviour of NiTi SMA Helical Springs under Different Temperatures and Deflections.” ISRN Materials Science 2013: 1–4. https://doi.org/10.1155/2013/320370.

Harvard

Santhanam, R., Krishna, Y. and Sivakumar, M. S. (2013) ‘Behaviour of NiTi SMA Helical Springs under Different Temperatures and Deflections’, ISRN Materials Science, 2013, pp. 1–4. doi:10.1155/2013/320370.

IEEE

R. Santhanam, Y. Krishna, and M. S. Sivakumar, “Behaviour of NiTi SMA Helical Springs under Different Temperatures and Deflections,” ISRN Materials Science, vol. 2013, pp. 1–4, 2013, doi: 10.1155/2013/320370.

BibTeX

@article{santhanam2013behaviour,
  title     = {{Behaviour of NiTi SMA Helical Springs under Different Temperatures and Deflections}},
  author    = {Santhanam, R. and Krishna, Y. and Sivakumar, M S},
  journal   = {ISRN Materials Science},
  year      = {2013},
  volume    = {2013},
  pages     = {1--4},
  doi       = {10.1155/2013/320370},
  url       = {https://doi.org/10.1155/2013/320370}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201411
201711
202111
202411
202522

Its field-weighted citation impact is 0.12: it has been cited 0.12 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • NiTi
  • helical springs
  • shape memory effect
  • transformation temperature
  • residual displacement
  • in situ heating
  • thermocouple temperature measurement

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Santhanam, R., Krishna, Y., & Sivakumar, M. S. (2013). Behaviour of NiTi SMA Helical Springs under Different Temperatures and Deflections. ISRN Materials Science, 2013, 1–4. https://doi.org/10.1155/2013/320370

How many times has this paper been cited?

6 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at ISRN Materials Science: sign in and open the PDF from this page.

Who wrote this paper?

R. Santhanam, Y. Krishna, M S Sivakumar.

What is the DOI of this paper?

10.1155/2013/320370, permanently at https://doi.org/10.1155/2013/320370. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.