Paper · 2011 · Open access
Behaviour of lubricant additives on DLC coatings
Published 1 March 2011 · DOI 10.25560/11734
In brief
“Behaviour of lubricant additives on DLC coatings” is a 2011 paper by Balasubramaniam Vengudusamy. OpenAlex counts 6 citations as of 17 November 2026. It is open access under a CC BY-NC-ND licence: the full text is free to read.
- Citations
- 6
- Most cited in
- 2025 (2)
- Authors
- 1
Abstract
Non-ferrous surfaces such as diamond-like carbon (DLC) coatings are becoming potential candidates for automotive engine parts because of fuel economy gains that these surfaces offer by operating with very low friction. In recent years, a wide range of DLC coatings have been developed and it is important to understand their film-forming, friction reduction and wear resistance mechanisms under lubricated conditions. This aim of the work described in this thesis is to improve our understanding of the tribological behaviour of DLC coatings with different engine oil additives. The main focus of the thesis is to study a wide range of available DLC coating types with currently available and widely-used additives such as ZDDP, friction modifiers, MoDTC etc., in order to establish general rules of their tribological behaviour that will help lubricant manufacturers produce new oil formulations. The research shows that tribofilms are formed on all DLCs by most of the currently used additives and that the film thickness depends on various factors such as type of DLC coating, doping elements present in the coatings, concentration of hydrogen and tungsten present in the coatings and the counterpart. Hydrogen-free coatings (a-C and ta-C) give lower boundary friction compared to the other coatings whereas hydrogenated amorphous carbon (a-C:H) coatings give better wear resistance properties. Study of a-C:H:W coatings shows that the concentration of tungsten present in the coatings has a significant influence on wear resistance properties but negligible influence on the friction properties when additives are present. The steel/steel couple is known to form a thick ZDDP tribofilm. If one of the contact surfaces is coated with DLC, the tribofilm forming properties on the steel vary and, for some cases, the low boundary friction properties of DLCs are degraded.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Vengudusamy, B. (2011). Behaviour of lubricant additives on DLC coatings. https://doi.org/10.25560/11734
MLA 9
Vengudusamy, Balasubramaniam. “Behaviour of lubricant additives on DLC coatings.” 2011. https://doi.org/10.25560/11734.
Chicago
Vengudusamy, Balasubramaniam. 2011. “Behaviour of lubricant additives on DLC coatings.” https://doi.org/10.25560/11734.
Harvard
Vengudusamy, B. (2011) ‘Behaviour of lubricant additives on DLC coatings’. doi:10.25560/11734.
IEEE
B. Vengudusamy, “Behaviour of lubricant additives on DLC coatings,” 2011, doi: 10.25560/11734.
BibTeX
@article{vengudusamy2011behaviour,
title = {{Behaviour of lubricant additives on DLC coatings}},
author = {Vengudusamy, Balasubramaniam},
year = {2011},
doi = {10.25560/11734},
url = {https://doi.org/10.25560/11734}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2015 | 1 | |
| 2021 | 1 | |
| 2022 | 1 | |
| 2025 | 2 | |
| 2026 | 1 |
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Lubricants and Their Additives
- diamond-like carbon films
- lubricant additives
- tribological properties
- tribofilm formation
- zinc dialkyldithiophosphate
- friction modifiers
- MoDTC
- hydrogenated amorphous carbon
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Vengudusamy, B. (2011). Behaviour of lubricant additives on DLC coatings. https://doi.org/10.25560/11734
How many times has this paper been cited?
6 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: sign in and open the full text from this page.
Who wrote this paper?
Balasubramaniam Vengudusamy.
What is the DOI of this paper?
10.25560/11734, permanently at https://doi.org/10.25560/11734. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.