Paper · 2013 · Open access

Basic Understanding of the Role of the Interfacial Inversion Layer in the Operation of Silicon Solar Cells with a-Si/c-Si Heterojunction (HIT)

Moustafa Y. Ghannam, Shehadah, G., Yaser M. Abdulraheem, Jef Poortmans

EU PVSEC, 822–826 · Published 1 January 2013 · DOI 10.4229/28theupvsec2013-2bo.2.6

Read the free full textCite this paper

In brief

“Basic Understanding of the Role of the Interfacial Inversion Layer in the Operation of Silicon Solar Cells with a-Si/c-Si Heterojunction (HIT)” is a 2013 paper by Moustafa Y. Ghannam and 3 co-authors, published in EU PVSEC. OpenAlex counts 5 citations as of 16 November 2026. It is open access: the full text is free to read at EU PVSEC.

Citations
5
Most cited in
2014 (4)
Field-weighted impact
0.74
References
1
Authors
4

Abstract

Valence band offset and valence band bending at the p+ hydrogenated amorphous silicon/n-type crystalline silicon (a-Si:H(p+)/n_c-Si) interface in heterojunction silicon solar cells (HIT) induce a p+ inversion layer which pushes the pn junction 20-25 nm deep in the c-Si side. The heavily hole populated interfacial inversion layer acts as the HIT cell emitter while the ultrathin amorphous silicon layer is the front contact. The impact of doping level and dangling bond defects in the a-Si:H layer and of interface states on the inversion layer properties is investigated by means of AFORS-HET simulations. Apart from the electric field created by the conduction band offset, the HIT cell performs like a c-Si solar cell which has an inversion layer emitter matching that of the HIT cell, with an open circuit voltage of 733 mV. The latter rolls off at relatively large interface (front surface) recombination velocity. Increasing the a-Si:H(p+) doping level modifies the peak hole concentration in the inversion layer and increases the front surface field. On the other hand, c-Si cell with an ultrathin dopant diffused emitter having also the same emitter hole profile sees its performance degraded at relatively low surface reombination because it suffers from bandgap narrowing and from doping dependent mobility degradation and has no front surface field. Inserting an ultrathin intrinsic or lowly doped a-Si:H spacer between a-Si:H(p+) and c-Si provides less hole population in the inversion layer which reduces Auger recombination and improves the open circuit voltage at low surface recombination to 735 mV despite the less effective front surface field.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Ghannam, M. Y., G., S., Abdulraheem, Y. M., & Poortmans, J. (2013). Basic Understanding of the Role of the Interfacial Inversion Layer in the Operation of Silicon Solar Cells with a-Si/c-Si Heterojunction (HIT). EU PVSEC, 822–826. https://doi.org/10.4229/28theupvsec2013-2bo.2.6

MLA 9

Ghannam, Moustafa Y., et al. “Basic Understanding of the Role of the Interfacial Inversion Layer in the Operation of Silicon Solar Cells with a-Si/c-Si Heterojunction (HIT).” EU PVSEC, 2013, pp. 822–826. https://doi.org/10.4229/28theupvsec2013-2bo.2.6.

Chicago

Ghannam, Moustafa Y., Shehadah, G., Yaser M. Abdulraheem, and Jef Poortmans. 2013. “Basic Understanding of the Role of the Interfacial Inversion Layer in the Operation of Silicon Solar Cells with a-Si/c-Si Heterojunction (HIT).” EU PVSEC: 822–826. https://doi.org/10.4229/28theupvsec2013-2bo.2.6.

Harvard

Ghannam, M. Y. et al. (2013) ‘Basic Understanding of the Role of the Interfacial Inversion Layer in the Operation of Silicon Solar Cells with a-Si/c-Si Heterojunction (HIT)’, EU PVSEC, pp. 822–826. doi:10.4229/28theupvsec2013-2bo.2.6.

IEEE

M. Y. Ghannam, S. G., Y. M. Abdulraheem, and J. Poortmans, “Basic Understanding of the Role of the Interfacial Inversion Layer in the Operation of Silicon Solar Cells with a-Si/c-Si Heterojunction (HIT),” EU PVSEC, pp. 822–826, 2013, doi: 10.4229/28theupvsec2013-2bo.2.6.

BibTeX

@article{ghannam2013basic,
  title     = {{Basic Understanding of the Role of the Interfacial Inversion Layer in the Operation of Silicon Solar Cells with a-Si/c-Si Heterojunction (HIT)}},
  author    = {Ghannam, Moustafa Y. and G., Shehadah, and Abdulraheem, Yaser M. and Poortmans, Jef},
  journal   = {EU PVSEC},
  year      = {2013},
  pages     = {822--826},
  doi       = {10.4229/28theupvsec2013-2bo.2.6},
  url       = {https://doi.org/10.4229/28theupvsec2013-2bo.2.6}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • hydrogenated amorphous silicon
  • crystalline silicon
  • silicon heterojunction solar cells
  • valence band offset
  • open-circuit voltage
  • surface recombination velocity
  • interface states
  • dangling bond defects

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Ghannam, M. Y., G., S., Abdulraheem, Y. M., & Poortmans, J. (2013). Basic Understanding of the Role of the Interfacial Inversion Layer in the Operation of Silicon Solar Cells with a-Si/c-Si Heterojunction (HIT). EU PVSEC, 822–826. https://doi.org/10.4229/28theupvsec2013-2bo.2.6

How many times has this paper been cited?

5 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at EU PVSEC.

Who wrote this paper?

Moustafa Y. Ghannam, Shehadah, G., Yaser M. Abdulraheem, Jef Poortmans.

What is the DOI of this paper?

10.4229/28theupvsec2013-2bo.2.6. The permanent link is https://doi.org/10.4229/28theupvsec2013-2bo.2.6.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.