Journal article · 2020 · Open access

AVALIAÇÃO DO DESGASTE POR MICROABRASÃO DO AÇO AISI M-35 REVESTIDO POR DLC – DIAMOND-LIKE CARBON.

Ramon Martins Drumond, Ernane Rodrigues da Silva, Paulo Sérgio Martins, Elhadji Cheikh Talibouya Ba

Revista Eletrônica Perspectivas da Ciência e Tecnologia, 12 · Published 18 December 2020 · DOI 10.22407/1984-5693.2020.v12.p.199-212

Open full textCite this paper

In brief

“AVALIAÇÃO DO DESGASTE POR MICROABRASÃO DO AÇO AISI M-35 REVESTIDO POR DLC – DIAMOND-LIKE CARBON.” is a 2020 journal article by Ramon Martins Drumond and 3 co-authors, published in Revista Eletrônica Perspectivas da Ciência e Tecnologia. OpenAlex counts 7 citations as of 22 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at Revista Eletrônica Perspectivas da Ciência e Tecnologia.

Citations
7
Most cited in
2025 (4)
Field-weighted impact
0.23
Authors
4

Abstract

A utilização de revestimentos finos é uma alternativa muito utilizada para se alterar características superficiais. No caso de ferramentas de corte, o objetivo é de se proporcionar melhorias ao processo de usinagem como, por exemplo, melhor acabamento superficial dos produtos e aumento da vida útil das ferramentas. O DLC – Diamond-like Carbon é um material amplamente utilizado como revestimento. Ele corresponde a uma forma metaestável do carbono amorfo, na qual são encontradas ligações sp3 e sp2, próprias do diamante e do grafite, respectivamente. Por ser constituído por esse misto de ligações, o DLC é capaz de combinar características presentes em ambos os materiais, como boa resistência ao desgaste e baixo coeficiente de atrito. O presente estudo teve por objetivo realizar uma comparação entre o desempenho de amostras de aço rápido AISI M-35 revestidas por DLC e amostras não revestidas, no que se refere à resistência ao desgaste por microabrasão. Primeiramente, foi realizada a caracterização dos materiais. O filme DLC foi analisado por meio das técnicas de espectroscopia Raman e espectroscopia de fotoelétrons excitados por raios-X. Sua análise permitiu caracterizá-lo como um carbono amorfo não tetraédrico de espessura média de cerca de 1,5 μm. O aço AISI M-35, por sua vez, teve sua composição química determinada por espectrometria de emissão ótica. Por fim, foi analisado o desempenho das amostras revestidas e não revestidas no teste de resistência à microabrasão, o caloteste. As calotas obtidas tiveram o diâmetro, em média, 71% menor nas amostras que receberam o revestimento. O coeficiente de desgaste específico foi, em média, 142 vezes maior no aço não revestido por DLC. Esses resultados permitiram concluir que a utilização do DLC como revestimento em ferramentas de corte fabricadas em aço AISI M-35, pode se constituir como uma alternativa viável quando se busca melhorar o desempenho de ferramentas de corte.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Drumond, R. M., da Silva, E. R., Martins, P. S., & Ba, E. C. T. (2020). AVALIAÇÃO DO DESGASTE POR MICROABRASÃO DO AÇO AISI M-35 REVESTIDO POR DLC – DIAMOND-LIKE CARBON. Revista Eletrônica Perspectivas da Ciência e Tecnologia, 12. https://doi.org/10.22407/1984-5693.2020.v12.p.199-212

MLA 9

Drumond, Ramon Martins, et al. “AVALIAÇÃO DO DESGASTE POR MICROABRASÃO DO AÇO AISI M-35 REVESTIDO POR DLC – DIAMOND-LIKE CARBON.” Revista Eletrônica Perspectivas da Ciência e Tecnologia, vol. 12, 2020. https://doi.org/10.22407/1984-5693.2020.v12.p.199-212.

Chicago

Drumond, Ramon Martins, Ernane Rodrigues da Silva, Paulo Sérgio Martins, and Elhadji Cheikh Talibouya Ba. 2020. “AVALIAÇÃO DO DESGASTE POR MICROABRASÃO DO AÇO AISI M-35 REVESTIDO POR DLC – DIAMOND-LIKE CARBON.” Revista Eletrônica Perspectivas da Ciência e Tecnologia 12. https://doi.org/10.22407/1984-5693.2020.v12.p.199-212.

Harvard

Drumond, R. M. et al. (2020) ‘AVALIAÇÃO DO DESGASTE POR MICROABRASÃO DO AÇO AISI M-35 REVESTIDO POR DLC – DIAMOND-LIKE CARBON.’, Revista Eletrônica Perspectivas da Ciência e Tecnologia, 12. doi:10.22407/1984-5693.2020.v12.p.199-212.

IEEE

R. M. Drumond, E. R. da Silva, P. S. Martins, and E. C. T. Ba, “AVALIAÇÃO DO DESGASTE POR MICROABRASÃO DO AÇO AISI M-35 REVESTIDO POR DLC – DIAMOND-LIKE CARBON.,” Revista Eletrônica Perspectivas da Ciência e Tecnologia, vol. 12, 2020, doi: 10.22407/1984-5693.2020.v12.p.199-212.

BibTeX

@article{drumond2020avalia,
  title     = {{AVALIAÇÃO DO DESGASTE POR MICROABRASÃO DO AÇO AISI M-35 REVESTIDO POR DLC – DIAMOND-LIKE CARBON.}},
  author    = {Drumond, Ramon Martins and da Silva, Ernane Rodrigues and Martins, Paulo Sérgio and Ba, Elhadji Cheikh Talibouya},
  journal   = {Revista Eletrônica Perspectivas da Ciência e Tecnologia},
  year      = {2020},
  volume    = {12},
  doi       = {10.22407/1984-5693.2020.v12.p.199-212},
  url       = {https://doi.org/10.22407/1984-5693.2020.v12.p.199-212}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202211
202311
202411
202544

Its field-weighted citation impact is 0.23: it has been cited 0.23 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • diamond-like carbon
  • diamond-like carbon films
  • cutting tools
  • wear resistance
  • amorphous carbon
  • tool life
  • surface finishing
  • Raman spectroscopy

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Drumond, R. M., da Silva, E. R., Martins, P. S., & Ba, E. C. T. (2020). AVALIAÇÃO DO DESGASTE POR MICROABRASÃO DO AÇO AISI M-35 REVESTIDO POR DLC – DIAMOND-LIKE CARBON. Revista Eletrônica Perspectivas da Ciência e Tecnologia, 12. https://doi.org/10.22407/1984-5693.2020.v12.p.199-212

How many times has this paper been cited?

7 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Revista Eletrônica Perspectivas da Ciência e Tecnologia: sign in and open the full text from this page.

Who wrote this paper?

Ramon Martins Drumond, Ernane Rodrigues da Silva, Paulo Sérgio Martins, Elhadji Cheikh Talibouya Ba.

What is the DOI of this paper?

10.22407/1984-5693.2020.v12.p.199-212, permanently at https://doi.org/10.22407/1984-5693.2020.v12.p.199-212. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.