Dissertation · 2009 · Open access
Avaliação da tenacidade à fratura de aço API 5L X70 utilizado na fabricação de dutos transportadores de gás e petróleo
Digital Library of Theses and Dissertations (Universidade de São Paulo) · Published 17 April 2009 · DOI 10.11606/d.18.2009.tde-19012011-111506
In brief
“Avaliação da tenacidade à fratura de aço API 5L X70 utilizado na fabricação de dutos transportadores de gás e petróleo” is a 2009 dissertation by Julio Cesar de Souza Francisco, published in Digital Library of Theses and Dissertations (Universidade de São Paulo). OpenAlex counts 3 citations as of 22 November 2026. It is open access: the full text is free to read at Digital Library of Theses and Dissertations (Universidade de São Paulo).
- Citations
- 3
- Most cited in
- 2014 (1)
- References
- 29
- Authors
- 1
Abstract
The evaluation of pipes´ structural integrity from laboratories specimens depends on choosing the right specimen geometry that is able to present the conditions of plastic constrain at the crack tip, similar to the one found in the pipes´ operational conditions. The NEMAF Group from SMM, EESC-USP has been performing studies in this area, trying to develop specimen´s geometry that is able to represent this situation, as well as the necessary experimental methodologies to evaluate the fracture toughness of pipes. However, in some cases, the pipe size is a limiting factor in determining the specimen size and geometry. In this work is presented the development and application of specimens SE(T), evaluating the influence of the geometry and dimensions of the specimens on the fracture toughness of API 5L X70 steel, regularly used in the pipes for gas and petroleum transportation. Therefore, the resistance curves to ductile crack propagation, J-R`s curves, using the single specimen methodology, together with the variation of the elastic compliance technique (multiple unloading), measure at the crack mouth (CMOD) that provides both the plastic area under the load x displacement curve and crack size, according to the ASTM E1820-05 standard. The SE(T) specimens with shallow (a/W=0.2) and deep (a/W=0.5) cracks and W/B ratio of 2.5 and 1.0 trying to reduce the amount of plastic deformation and a straight crack front, as well as a dominance of a plane strain state at the crack tip, as recommended by the ASTM E1820-05 standard for other specimens type. From the results it was observed that, independent of the initial a/W, no significant differences were observed in the J-R curves. This fact is verified in both cases, this is, W/B = 2.5 and 1.0. However, in the great majority of CDP\'s with W/B = 2.5, it was obtained an anomalous crack propagation during testing, in other words, they presented an accentuated tunneling due to a high plane tension state near the CDP´s lateral faces, even with the side groove of 20% thickness. The specimens with W/B = 1.0 were capable to produce J-R curves with straight crack fronts, this is, without tunneling, allowing the measurement of medium values of the crack (ai e af) according to the ASTM E1820-05 standard. The reasons for this fact are discussed in details in this work. In general, the split, when present, did not allow a correct crack size measurement. Still, contrary to the other researchers\' observation, in this work, it was observed that in several cases the splits were able to induced unstable fracture.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Francisco, J. C. D. S. (2009). Avaliação da tenacidade à fratura de aço API 5L X70 utilizado na fabricação de dutos transportadores de gás e petróleo. Digital Library of Theses and Dissertations (Universidade de São Paulo). https://doi.org/10.11606/d.18.2009.tde-19012011-111506
MLA 9
Francisco, Julio Cesar de Souza. “Avaliação da tenacidade à fratura de aço API 5L X70 utilizado na fabricação de dutos transportadores de gás e petróleo.” Digital Library of Theses and Dissertations (Universidade de São Paulo), 2009. https://doi.org/10.11606/d.18.2009.tde-19012011-111506.
Chicago
Francisco, Julio Cesar de Souza. 2009. “Avaliação da tenacidade à fratura de aço API 5L X70 utilizado na fabricação de dutos transportadores de gás e petróleo.” Digital Library of Theses and Dissertations (Universidade de São Paulo). https://doi.org/10.11606/d.18.2009.tde-19012011-111506.
Harvard
Francisco, J. C. D. S. (2009) ‘Avaliação da tenacidade à fratura de aço API 5L X70 utilizado na fabricação de dutos transportadores de gás e petróleo’, Digital Library of Theses and Dissertations (Universidade de São Paulo). doi:10.11606/d.18.2009.tde-19012011-111506.
IEEE
J. C. D. S. Francisco, “Avaliação da tenacidade à fratura de aço API 5L X70 utilizado na fabricação de dutos transportadores de gás e petróleo,” Digital Library of Theses and Dissertations (Universidade de São Paulo), 2009, doi: 10.11606/d.18.2009.tde-19012011-111506.
BibTeX
@phdthesis{francisco2009avalia,
title = {{Avaliação da tenacidade à fratura de aço API 5L X70 utilizado na fabricação de dutos transportadores de gás e petróleo}},
author = {Francisco, Julio Cesar de Souza},
year = {2009},
doi = {10.11606/d.18.2009.tde-19012011-111506},
url = {https://doi.org/10.11606/d.18.2009.tde-19012011-111506}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2014 | 1 | |
| 2017 | 1 | |
| 2018 | 1 |
Topic and keywords
Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics
- fracture toughness
- API 5L X70 steel
- pipeline steel
- oil and gas pipelines
- specimen testing
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Francisco, J. C. D. S. (2009). Avaliação da tenacidade à fratura de aço API 5L X70 utilizado na fabricação de dutos transportadores de gás e petróleo. Digital Library of Theses and Dissertations (Universidade de São Paulo). https://doi.org/10.11606/d.18.2009.tde-19012011-111506
How many times has this paper been cited?
3 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Digital Library of Theses and Dissertations (Universidade de São Paulo): sign in and open the PDF from this page.
Who wrote this paper?
Julio Cesar de Souza Francisco.
What is the DOI of this paper?
10.11606/d.18.2009.tde-19012011-111506, permanently at https://doi.org/10.11606/d.18.2009.tde-19012011-111506. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.