Journal article · 2015 · Open access

Application and modeling of an integrated amorphous silicon tandem based device for solar water splitting

Félix Urbain, Vladimir Smirnov, Jan‐Philipp Becker, Uwe Rau, Jürgen Ziegler, Bernhard Kaiser, Wolfram Jaegermann, F. Finger

Solar Energy Materials and Solar Cells, 140, 275–280 · Published 14 May 2015 · DOI 10.1016/j.solmat.2015.04.013

Free PDFView at the publisherCite this paper

In brief

“Application and modeling of an integrated amorphous silicon tandem based device for solar water splitting” is a 2015 journal article by Félix Urbain and 7 co-authors, published in Solar Energy Materials and Solar Cells. OpenAlex counts 62 citations as of 16 November 2026, which puts it in the top 7% of works published in 2015 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Solar Energy Materials and Solar Cells.

Citations
62
Most cited in
2017 (9)
Field-weighted impact
4.20
References
49
Authors
8

Abstract

Direct solar-to-hydrogen conversion via water splitting was demonstrated in an integrated photovoltaic–electrochemical (PV–EC) device using a hydrogenated amorphous silicon thin film tandem junction (a-Si:H/a-Si:H) solar cell as photocathode. The solar cell was adapted to provide sufficient photovoltage to drive both the hydrogen and oxygen evolution reactions. The best results, in terms of photoelectrochemical stability and performance, were obtained with an Ag/Pt layer stack as H2 evolving photocathode back contact and with a RuO2 counter electrode for O2 evolution. Under irradiation by simulated sunlight (AM 1.5 spectrum with 100 mW/cm2), we achieved 6.8% solar-to-hydrogen efficiency at 0 V applied bias in a two-electrode set-up. This sets a fresh benchmark for integrated thin film silicon tandem based photoelectrochemical devices. In addition, the photovoltage at constant current (−3 mA/cm2) was measured over a prolonged period of time and revealed an excellent chemical stability (operation over 50 h) of the photocathode. Furthermore, we present an empirical serial circuit model of the PV–EC device, in which the corresponding photovoltaic and electrochemical components are decoupled. This allows for a detailed comparison between the solar cell and the PV–EC cell characteristics, from which the relevant loss processes in the overall system could be identified. The model was further used to compare calculated and measured photocurrent–voltage characteristics of the investigated PV–EC device which showed excellent agreement.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Urbain, F., Smirnov, V., Becker, J., Rau, U., Ziegler, J., Kaiser, B., Jaegermann, W., & Finger, F. (2015). Application and modeling of an integrated amorphous silicon tandem based device for solar water splitting. Solar Energy Materials and Solar Cells, 140, 275–280. https://doi.org/10.1016/j.solmat.2015.04.013

MLA 9

Urbain, Félix, et al. “Application and modeling of an integrated amorphous silicon tandem based device for solar water splitting.” Solar Energy Materials and Solar Cells, vol. 140, 2015, pp. 275–280. https://doi.org/10.1016/j.solmat.2015.04.013.

Chicago

Urbain, Félix, Vladimir Smirnov, Jan‐Philipp Becker, Uwe Rau, Jürgen Ziegler, Bernhard Kaiser, Wolfram Jaegermann, and F. Finger. 2015. “Application and modeling of an integrated amorphous silicon tandem based device for solar water splitting.” Solar Energy Materials and Solar Cells 140: 275–280. https://doi.org/10.1016/j.solmat.2015.04.013.

Harvard

Urbain, F. et al. (2015) ‘Application and modeling of an integrated amorphous silicon tandem based device for solar water splitting’, Solar Energy Materials and Solar Cells, 140, pp. 275–280. doi:10.1016/j.solmat.2015.04.013.

IEEE

F. Urbain et al., “Application and modeling of an integrated amorphous silicon tandem based device for solar water splitting,” Solar Energy Materials and Solar Cells, vol. 140, pp. 275–280, 2015, doi: 10.1016/j.solmat.2015.04.013.

BibTeX

@article{urbain2015application,
  title     = {{Application and modeling of an integrated amorphous silicon tandem based device for solar water splitting}},
  author    = {Urbain, Félix and Smirnov, Vladimir and Becker, Jan‐Philipp and Rau, Uwe and Ziegler, Jürgen and Kaiser, Bernhard and Jaegermann, Wolfram and Finger, F.},
  journal   = {Solar Energy Materials and Solar Cells},
  year      = {2015},
  volume    = {140},
  pages     = {275--280},
  doi       = {10.1016/j.solmat.2015.04.013},
  url       = {https://doi.org/10.1016/j.solmat.2015.04.013}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201799
201899
201977
202066
202133
202255
202344
202433
202522
202622

Its field-weighted citation impact is 4.20: it has been cited 4.20 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • solar water splitting
  • photocathodes
  • hydrogen evolution reaction
  • oxygen evolution reaction
  • solar-to-hydrogen efficiency
  • photoelectrochemical stability
  • photocurrent-voltage characteristics
  • loss process

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Urbain, F., Smirnov, V., Becker, J., Rau, U., Ziegler, J., Kaiser, B., Jaegermann, W., & Finger, F. (2015). Application and modeling of an integrated amorphous silicon tandem based device for solar water splitting. Solar Energy Materials and Solar Cells, 140, 275–280. https://doi.org/10.1016/j.solmat.2015.04.013

How many times has this paper been cited?

62 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Solar Energy Materials and Solar Cells.

Who wrote this paper?

Félix Urbain, Vladimir Smirnov, Jan‐Philipp Becker, Uwe Rau, Jürgen Ziegler, Bernhard Kaiser, Wolfram Jaegermann, F. Finger.

What is the DOI of this paper?

10.1016/j.solmat.2015.04.013. The permanent link is https://doi.org/10.1016/j.solmat.2015.04.013.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.