Journal article · 2005 · Open access

Appearance of Two-Way Strain in Shape Memory Effect of Ti-Ni-Nb Alloy-Influence of Applied Strain on Two-Way Strain-

Keisuke Okita, Nagatoshi OKABE, Tomoyuki Sato, Takashi Nakao

Journal of the Japan Institute of Metals and Materials, 69(8), 622–627 · Published 1 January 2005 · DOI 10.2320/jinstmet.69.622

Open PDFView at the publisherCite this paper

In brief

“Appearance of Two-Way Strain in Shape Memory Effect of Ti-Ni-Nb Alloy-Influence of Applied Strain on Two-Way Strain-” is a 2005 journal article by Keisuke Okita and 3 co-authors, published in Journal of the Japan Institute of Metals and Materials. OpenAlex counts 3 citations as of 22 November 2026. It is open access: the full text is free to read at Journal of the Japan Institute of Metals and Materials.

Citations
3
Most cited in
2018 (1)
References
11
Authors
4

Abstract

A promising field for application of shape memory alloys (SMAs) in the near future is in micro-actuator technology. Two-way shape memory effect (TWSME) is particularly suitable for application in actuators, since pre-determined responses can be obtained very easily by thermal changes to shape memory elements. In this paper, the TWSME, Ti-Ni-Nb alloy, was investigated quantitatively by applying various levels of pre-deformation. Deformation in a complete martensite phase was applied as a thermomechanical treatment in order to obtain the two-way memory strain. The experimental results indicated that the deformation mechanism in martensite phase was martensite orientation accompanied by dislocation slip. The dislocation due to the slip deformation is the origin of the internal stress field that is necessary to generate the two-way memory strain. However, excessive introduction of dislocation tends to decreases the two-way memory strain. The maximum two-way memory strain observed in this experiment was 2.1% at an applied strain of 18%. In addition, pre-deformation increases the temperature of reverse transformation, but decreases the temperature of martensitic transformation. These experimental results can be explained by using the series-parallel combined model suggested in our previous study.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Okita, K., OKABE, N., Sato, T., & Nakao, T. (2005). Appearance of Two-Way Strain in Shape Memory Effect of Ti-Ni-Nb Alloy-Influence of Applied Strain on Two-Way Strain-. Journal of the Japan Institute of Metals and Materials, 69(8), 622–627. https://doi.org/10.2320/jinstmet.69.622

MLA 9

Okita, Keisuke, et al. “Appearance of Two-Way Strain in Shape Memory Effect of Ti-Ni-Nb Alloy-Influence of Applied Strain on Two-Way Strain-.” Journal of the Japan Institute of Metals and Materials, vol. 69, no. 8, 2005, pp. 622–627. https://doi.org/10.2320/jinstmet.69.622.

Chicago

Okita, Keisuke, Nagatoshi OKABE, Tomoyuki Sato, and Takashi Nakao. 2005. “Appearance of Two-Way Strain in Shape Memory Effect of Ti-Ni-Nb Alloy-Influence of Applied Strain on Two-Way Strain-.” Journal of the Japan Institute of Metals and Materials 69 (8): 622–627. https://doi.org/10.2320/jinstmet.69.622.

Harvard

Okita, K. et al. (2005) ‘Appearance of Two-Way Strain in Shape Memory Effect of Ti-Ni-Nb Alloy-Influence of Applied Strain on Two-Way Strain-’, Journal of the Japan Institute of Metals and Materials, 69(8), pp. 622–627. doi:10.2320/jinstmet.69.622.

IEEE

K. Okita, N. OKABE, T. Sato, and T. Nakao, “Appearance of Two-Way Strain in Shape Memory Effect of Ti-Ni-Nb Alloy-Influence of Applied Strain on Two-Way Strain-,” Journal of the Japan Institute of Metals and Materials, vol. 69, no. 8, pp. 622–627, 2005, doi: 10.2320/jinstmet.69.622.

BibTeX

@article{okita2005appearance,
  title     = {{Appearance of Two-Way Strain in Shape Memory Effect of Ti-Ni-Nb Alloy-Influence of Applied Strain on Two-Way Strain-}},
  author    = {Okita, Keisuke and OKABE, Nagatoshi and Sato, Tomoyuki and Nakao, Takashi},
  journal   = {Journal of the Japan Institute of Metals and Materials},
  year      = {2005},
  volume    = {69},
  number    = {8},
  pages     = {622--627},
  doi       = {10.2320/jinstmet.69.622},
  url       = {https://doi.org/10.2320/jinstmet.69.622}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations

  • two-way shape memory effect
  • shape memory alloys
  • martensite
  • dislocation slip
  • martensite orientation
  • pre-deformation
  • thermomechanical processing
  • martensitic transformation temperature

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Okita, K., OKABE, N., Sato, T., & Nakao, T. (2005). Appearance of Two-Way Strain in Shape Memory Effect of Ti-Ni-Nb Alloy-Influence of Applied Strain on Two-Way Strain-. Journal of the Japan Institute of Metals and Materials, 69(8), 622–627. https://doi.org/10.2320/jinstmet.69.622

How many times has this paper been cited?

3 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of the Japan Institute of Metals and Materials: sign in and open the PDF from this page.

Who wrote this paper?

Keisuke Okita, Nagatoshi OKABE, Tomoyuki Sato, Takashi Nakao.

What is the DOI of this paper?

10.2320/jinstmet.69.622, permanently at https://doi.org/10.2320/jinstmet.69.622. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.