Journal article · 2025 · Open access
Analyze and Optimize the Welding Parameters of the Process by Pulsed Tubular Wire (FCAW - Flux Cored Arc Welding) Based on the Geometry of the Weld Beads Resulting from each Test
Journal of Material Science and Technology Research, 9, 11–23 · Published 2 October 2025 · DOI 10.31875/2410-4701.2022.09.02
In brief
“Analyze and Optimize the Welding Parameters of the Process by Pulsed Tubular Wire (FCAW - Flux Cored Arc Welding) Based on the Geometry of the Weld Beads Resulting from each Test” is a 2025 journal article by João Roberto Sartori Moreno and 3 co-authors, published in Journal of Material Science and Technology Research. OpenAlex counts 4 citations as of 22 November 2026. It is open access: the full text is free to read at Journal of Material Science and Technology Research.
- Citations
- 4
- Most cited in
- 2023 (1)
- Field-weighted impact
- 0.46
- References
- 18
- Authors
- 4
Abstract
This study aimed to analyze and optimize deposition welding parameters using a pulsed tubular wire process (FCAW - Flux Cored Arc Welding), where the influence variables adopted were the average current, the pulsation frequency, the welding speed and the contact-tip-workpiece distance, with each variable being tested at three different levels. The geometric characteristics evaluated, that is, the response variables, are width, reinforcement, penetration, reinforcement area, penetration area and dilution. The geometric characteristics evaluated, that is, the response variables, are the width, the reinforcement, the penetration, the reinforcement area, the penetration area, the contact-tip-workpiece distance and the dilution. In order to achieve the proposed objective, statistical techniques were used as analysis tools, and, in the first phase, the robust design method (Taguchi) was used to establish which combinations of parameters would be performed in each test, providing us with an L9 matrix. In a second phase, analysis of variance tables (ANOVA) were constructed to select the most significant parameters.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Moreno, J. R. S., Guimarães, J. B., Lizzi, E. A. D. S., & Corrêa, C. A. (2025). Analyze and Optimize the Welding Parameters of the Process by Pulsed Tubular Wire (FCAW - Flux Cored Arc Welding) Based on the Geometry of the Weld Beads Resulting from each Test. Journal of Material Science and Technology Research, 9, 11–23. https://doi.org/10.31875/2410-4701.2022.09.02
MLA 9
Moreno, João Roberto Sartori, et al. “Analyze and Optimize the Welding Parameters of the Process by Pulsed Tubular Wire (FCAW - Flux Cored Arc Welding) Based on the Geometry of the Weld Beads Resulting from each Test.” Journal of Material Science and Technology Research, vol. 9, 2025, pp. 11–23. https://doi.org/10.31875/2410-4701.2022.09.02.
Chicago
Moreno, João Roberto Sartori, Jéssika Batista Guimarães, Elisângela Aparecida da Silva Lizzi, and Celso Alves Corrêa. 2025. “Analyze and Optimize the Welding Parameters of the Process by Pulsed Tubular Wire (FCAW - Flux Cored Arc Welding) Based on the Geometry of the Weld Beads Resulting from each Test.” Journal of Material Science and Technology Research 9: 11–23. https://doi.org/10.31875/2410-4701.2022.09.02.
Harvard
Moreno, J. R. S. et al. (2025) ‘Analyze and Optimize the Welding Parameters of the Process by Pulsed Tubular Wire (FCAW - Flux Cored Arc Welding) Based on the Geometry of the Weld Beads Resulting from each Test’, Journal of Material Science and Technology Research, 9, pp. 11–23. doi:10.31875/2410-4701.2022.09.02.
IEEE
J. R. S. Moreno, J. B. Guimarães, E. A. D. S. Lizzi, and C. A. Corrêa, “Analyze and Optimize the Welding Parameters of the Process by Pulsed Tubular Wire (FCAW - Flux Cored Arc Welding) Based on the Geometry of the Weld Beads Resulting from each Test,” Journal of Material Science and Technology Research, vol. 9, pp. 11–23, 2025, doi: 10.31875/2410-4701.2022.09.02.
BibTeX
@article{moreno2025analyze,
title = {{Analyze and Optimize the Welding Parameters of the Process by Pulsed Tubular Wire (FCAW - Flux Cored Arc Welding) Based on the Geometry of the Weld Beads Resulting from each Test}},
author = {Moreno, João Roberto Sartori and Guimarães, Jéssika Batista and Lizzi, Elisângela Aparecida da Silva and Corrêa, Celso Alves},
journal = {Journal of Material Science and Technology Research},
year = {2025},
volume = {9},
pages = {11--23},
doi = {10.31875/2410-4701.2022.09.02},
url = {https://doi.org/10.31875/2410-4701.2022.09.02}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2023 | 1 | |
| 2024 | 1 | |
| 2025 | 1 | |
| 2026 | 1 |
Its field-weighted citation impact is 0.46: it has been cited 0.46 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- flux-cored arc welding
- welding parameter optimization
- weld bead geometry
- weld penetration
- weld reinforcement
- dilution
- welding speed
- pulsation frequency
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Moreno, J. R. S., Guimarães, J. B., Lizzi, E. A. D. S., & Corrêa, C. A. (2025). Analyze and Optimize the Welding Parameters of the Process by Pulsed Tubular Wire (FCAW - Flux Cored Arc Welding) Based on the Geometry of the Weld Beads Resulting from each Test. Journal of Material Science and Technology Research, 9, 11–23. https://doi.org/10.31875/2410-4701.2022.09.02
How many times has this paper been cited?
4 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Journal of Material Science and Technology Research: sign in and open the PDF from this page.
Who wrote this paper?
João Roberto Sartori Moreno, Jéssika Batista Guimarães, Elisângela Aparecida da Silva Lizzi, Celso Alves Corrêa.
What is the DOI of this paper?
10.31875/2410-4701.2022.09.02, permanently at https://doi.org/10.31875/2410-4701.2022.09.02. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.