Journal article · 2022 · Open access
Analysis of Dissimilar Welding Joint between Inconel 718 and AISI 316L by GTAW Multipass Process
Soldagem & Inspeção, 27, e2709 · Published 1 January 2022 · DOI 10.1590/0104-9224/si27.09
In brief
“Analysis of Dissimilar Welding Joint between Inconel 718 and AISI 316L by GTAW Multipass Process” is a 2022 journal article by Rafaela dos Santos Silva and 3 co-authors, published in Soldagem & Inspeção. OpenAlex counts 8 citations as of 22 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at Soldagem & Inspeção.
- Citations
- 8
- Most cited in
- 2023 (3)
- Field-weighted impact
- 0.62
- References
- 24
- Authors
- 4
Abstract
AISI 316L steel and Inconel 718 are metals of wide application in industries. The study of dissimilar welding between these two materials is technologically important to improve their joint performance. We focused this study on the evaluation of the dissimilar weldability of these materials. Three samples of AISI 316L and Inconel 718 welded using a multipass GTAW (Gas Tungsten Arc Welding) process with different parameters were analyzed. The microstructural characterization, measurements of the volumetric fraction of the δ ferrite and Laves phase, the spacing between austenite dendrites, in addition to measurement and analysis of dimensions of the welding zones and the microhardness were performed. The measurement of the weld metal dimensions and the dendrite spacing showed that higher heat inputs increased the dilution zones and the spacing between austenite dendrites. The volumetric fraction of the δ ferrite decreased with the increase of heat input, while the Laves phase fraction increased. The microhardness presented significant variation in the weld pool due to changes in the phases and composition, as evidenced by EDS analysis in the dissimilar joints.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Silva, R. D. S., Demarque, R., da Silva, L. M., & de Castro, J. A. (2022). Analysis of Dissimilar Welding Joint between Inconel 718 and AISI 316L by GTAW Multipass Process. Soldagem & Inspeção, 27, e2709. https://doi.org/10.1590/0104-9224/si27.09
MLA 9
Silva, Rafaela dos Santos, et al. “Analysis of Dissimilar Welding Joint between Inconel 718 and AISI 316L by GTAW Multipass Process.” Soldagem & Inspeção, vol. 27, 2022, p. e2709. https://doi.org/10.1590/0104-9224/si27.09.
Chicago
Silva, Rafaela dos Santos, Rudineli Demarque, Leonardo Martins da Silva, and José Adílson de Castro. 2022. “Analysis of Dissimilar Welding Joint between Inconel 718 and AISI 316L by GTAW Multipass Process.” Soldagem & Inspeção 27: e2709. https://doi.org/10.1590/0104-9224/si27.09.
Harvard
Silva, R. D. S. et al. (2022) ‘Analysis of Dissimilar Welding Joint between Inconel 718 and AISI 316L by GTAW Multipass Process’, Soldagem & Inspeção, 27, p. e2709. doi:10.1590/0104-9224/si27.09.
IEEE
R. D. S. Silva, R. Demarque, L. M. da Silva, and J. A. de Castro, “Analysis of Dissimilar Welding Joint between Inconel 718 and AISI 316L by GTAW Multipass Process,” Soldagem & Inspeção, vol. 27, p. e2709, 2022, doi: 10.1590/0104-9224/si27.09.
BibTeX
@article{silva2022analysis,
title = {{Analysis of Dissimilar Welding Joint between Inconel 718 and AISI 316L by GTAW Multipass Process}},
author = {Silva, Rafaela dos Santos and Demarque, Rudineli and da Silva, Leonardo Martins and de Castro, José Adílson},
journal = {Soldagem \& Inspeção},
year = {2022},
volume = {27},
pages = {e2709},
doi = {10.1590/0104-9224/si27.09},
url = {https://doi.org/10.1590/0104-9224/si27.09}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2023 | 3 | |
| 2024 | 2 | |
| 2025 | 2 | |
| 2026 | 1 |
Its field-weighted citation impact is 0.62: it has been cited 0.62 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- dissimilar metal welding
- Inconel 718
- 316L stainless steel
- TIG welding
- multi-pass welding
- heat input
- delta ferrite
- Laves phase
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Silva, R. D. S., Demarque, R., da Silva, L. M., & de Castro, J. A. (2022). Analysis of Dissimilar Welding Joint between Inconel 718 and AISI 316L by GTAW Multipass Process. Soldagem & Inspeção, 27, e2709. https://doi.org/10.1590/0104-9224/si27.09
How many times has this paper been cited?
8 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Soldagem & Inspeção: sign in and open the PDF from this page.
Who wrote this paper?
Rafaela dos Santos Silva, Rudineli Demarque, Leonardo Martins da Silva, José Adílson de Castro.
What is the DOI of this paper?
10.1590/0104-9224/si27.09, permanently at https://doi.org/10.1590/0104-9224/si27.09. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.