Journal article · 2020 · Open access

Analisis Penerapan Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Kneader (Studi Kasus PT. XYZ)

Alloysius Vendhi Prasmoro, Muhamad Ruslan

Journal of Industrial and Engineering System, 1(1), 53–64 · Published 23 June 2020 · DOI 10.31599/jies.v1i1.167

Free PDFView at the publisherCite this paper

In brief

“Analisis Penerapan Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Kneader (Studi Kasus PT. XYZ)” is a 2020 journal article by Alloysius Vendhi Prasmoro and Muhamad Ruslan, published in Journal of Industrial and Engineering System. OpenAlex counts 11 citations as of 15 November 2026, which puts it in the top 7% of works published in 2020 by citations. It is open access under a CC BY-SA licence: the full text is free to read at Journal of Industrial and Engineering System.

Citations
11
Most cited in
2026 (4)
Field-weighted impact
0.63
References
1
Authors
2

Abstract

PT. XYZ has implemented Total Productive Maintenance (TPM) to improve the efficiency and effectiveness of manufacturing companies as a whole. However, the implementation is still not optimal and seen from not achieving the production target. This study aims to measure the value of the effectiveness of equipment, find the root causes of problems and provide suggestions for improvement. The study was conducted on a kneader machine that had the highest breakdown rate. This research begins by measuring the overall equipment effectiveness (OEE) achievement value, then identifying the six big losses that occur. The results showed that the average OEE value on the kneader machine was 81.62%, the effectiveness value was classified as very low because the standard OEE value for world-class companies was ideally 85%. The biggest factor influencing the low OEE value is the performance rate with a factor of six big losses in reducing spees losses of 42.66% and idling and minor stoppages of 31.27% of all time losses. What causes the magnitude of losses consists of human, machine, material, method, and environmental factors. Human and machine factors are the most dominant factors. To reduce these losses, companies should provide skills and knowledge training to operators about the signs of damage to the equipment. In addition, operators are given additional work in the form of equipment maintenance that is often used in work so that maintenance work can be more focused. Then the company must pay more attention to the comfort of the operator at work so that fatigue can be reduced and operator productivity is increased and increase operator awareness of the tools they use. Keywords: Overall Equipment Effectiveness (OEE), Six Big Losses, Idling and Minor Stoppages ABSTRAK XYZ telah menerapkan Total Productive Maintenance (TPM) guna meningkatkan efisiensi dan efektivitas perusahaan manufaktur secara menyeluruh. Namun dalam pelaksanaannya masih belum optimal dan dilihat dari tidak tercapainya target produksi. Penelitian ini bertujuan untuk mengukur nilai efektivitas peralatan, mencari akar penyebab masalah dan memberikan usulan perbaikan. Penelitian dilakukan pada mesin kneader yang selama ini memiliki tingkat breakdown yang tertinggi. Penelitian ini dimulai dengan mengukur pencapaian nilai overall equipment effectiveness (OEE), kemudian mengidentifikasi six big losses yang terjadi. Hasil penelitian menunjukan bahwa rata-rata nilai OEE pada mesin kneader sebesar 81,62%, nilai efektivitas ini tergolong sangat rendah karena standar nilai OEE untuk perusahaan kelas dunia idealnya adalah 85%. Faktor terbesar yang mempengaruhi rendahnya nilai OEE adalah performance rate dengan faktor persentase six big losses pada reduce spees losses 42,66% dan idling and minor stoppages sebesar 31,27% dari seluruh time losses. Yang menyebabkan…

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Prasmoro, A. V., & Ruslan, M. (2020). Analisis Penerapan Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Kneader (Studi Kasus PT. XYZ). Journal of Industrial and Engineering System, 1(1), 53–64. https://doi.org/10.31599/jies.v1i1.167

MLA 9

Prasmoro, Alloysius Vendhi, and Muhamad Ruslan. “Analisis Penerapan Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Kneader (Studi Kasus PT. XYZ).” Journal of Industrial and Engineering System, vol. 1, no. 1, 2020, pp. 53–64. https://doi.org/10.31599/jies.v1i1.167.

Chicago

Prasmoro, Alloysius Vendhi and Muhamad Ruslan. 2020. “Analisis Penerapan Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Kneader (Studi Kasus PT. XYZ).” Journal of Industrial and Engineering System 1 (1): 53–64. https://doi.org/10.31599/jies.v1i1.167.

Harvard

Prasmoro, A. V. and Ruslan, M. (2020) ‘Analisis Penerapan Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Kneader (Studi Kasus PT. XYZ)’, Journal of Industrial and Engineering System, 1(1), pp. 53–64. doi:10.31599/jies.v1i1.167.

IEEE

A. V. Prasmoro and M. Ruslan, “Analisis Penerapan Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Kneader (Studi Kasus PT. XYZ),” Journal of Industrial and Engineering System, vol. 1, no. 1, pp. 53–64, 2020, doi: 10.31599/jies.v1i1.167.

BibTeX

@article{prasmoro2020analisis,
  title     = {{Analisis Penerapan Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Kneader (Studi Kasus PT. XYZ)}},
  author    = {Prasmoro, Alloysius Vendhi and Ruslan, Muhamad},
  journal   = {Journal of Industrial and Engineering System},
  year      = {2020},
  volume    = {1},
  number    = {1},
  pages     = {53--64},
  doi       = {10.31599/jies.v1i1.167},
  url       = {https://doi.org/10.31599/jies.v1i1.167}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202233
202422
202522
202644

Its field-weighted citation impact is 0.63: it has been cited 0.63 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Social Sciences › Business, Management and Accounting › Strategy and Management › Management and Optimization Techniques

  • total productive maintenance
  • overall equipment effectiveness
  • six big losses
  • machine downtime
  • idling and minor stoppages
  • velocity loss
  • operator fatigue
  • operator training

Work with this paper

Most-cited papers in Business, Management and Accounting

All highly cited Business, Management and Accounting papers

Questions about this paper

How do I cite this paper in APA style?

Prasmoro, A. V., & Ruslan, M. (2020). Analisis Penerapan Total Productive Maintenance (TPM) dengan Metode Overall Equipment Effectiveness (OEE) pada Mesin Kneader (Studi Kasus PT. XYZ). Journal of Industrial and Engineering System, 1(1), 53–64. https://doi.org/10.31599/jies.v1i1.167

How many times has this paper been cited?

11 times, according to OpenAlex on 15 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Journal of Industrial and Engineering System.

Who wrote this paper?

Alloysius Vendhi Prasmoro, Muhamad Ruslan.

What is the DOI of this paper?

10.31599/jies.v1i1.167. The permanent link is https://doi.org/10.31599/jies.v1i1.167.

Bibliographic data from OpenAlex (CC0), last checked 15 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.