Paper · 2019 · Open access
ANÁLISIS DE UNA PLACA BASE DE UNIÓN ENTRE COLUMNA DE CONCRETO-COLUMNA DE ACERO EN EL RANGO NO LINEAL ANALYSIS OF A JOINT BASE PLATE BETWEEN CONCRETE COLUMN-STEEL COLUMNS IN THE NON-LINEAR RANGE
Published 1 January 2019 · DOI 10.13140/rg.2.2.21271.83363
In brief
“ANÁLISIS DE UNA PLACA BASE DE UNIÓN ENTRE COLUMNA DE CONCRETO-COLUMNA DE ACERO EN EL RANGO NO LINEAL ANALYSIS OF A JOINT BASE PLATE BETWEEN CONCRETE COLUMN-STEEL COLUMNS IN THE NON-LINEAR RANGE” is a 2019 paper by Nelson López and 2 co-authors. OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY-SA licence: the full text is free to read at DOAJ (DOAJ: Directory of Open Access Journals).
- Citations
- 1
- Most cited in
- 2021 (1)
- Field-weighted impact
- 0.17
- References
- 3
- Authors
- 3
Abstract
En este trabajo se estudió el comportamiento en el rango lineal y no lineal de una junta (junta viga-columna) en una probeta a escala real, constituida por una columna de concreto unida a dos vigas de concreto mediante un vaciado monolítico; la columna de concreto se conectó a través de una placa base de acero a una columna de acero HEA160 sometida a cargas cíclicas durante un período de 5.000 s, obteniendo así, su curva de comportamiento histerético. Se creó un modelo matemático en el programa ABAQUS CAE a fin de verificar que el diseño de la junta de la probeta cumpliera con los requisitos normativos para el diseño de placas base, en base a aplastamiento del concreto y espesor de la placa. En los pernos se verificó su resistencia a fuerzas de corte, deformación por tracción, verificación por cono tracción en el concreto y esfuerzos de tracción dentro de la zona agrietada, se obtuvo como resultado que la falla se produjo por agrietamiento del concreto armado. \nPalabras clave: nodo viga-columna, pseudo-estático, ABACUS CAE. \nABSTRACT \nIn this research the behavior of a real scale experimental joint (column-beam joint) formed by three reinforced concrete elements, 1 column and 2 beams, attached to a structural steel column in the upper level is studied. The object in question was subjected to the action of cyclic loads in a single direction, in a pseudostatic test for 5000 s, in order to observe which element of the concrete cylinders failed and which the failure mode was. A mathematical model was created in the ABAQUS CAE software, in order to verify that the design of the gasket of the test piece complied with the normative requirements for the design of base plates, based on concrete crushing and thickness of the base plate. In the bolts its resistance to shear forces, tensile deformation, and verification by tensile cone in the concrete and tensile stress within the cracked area was verified, and it was obtained as a result that the failure was produced by cracking of the reinforced concrete. \nKeywords: beam-column joint, pseudo-static, ABAQUS CAE.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
López, N., Ugel, R., & Herrera, R. I. (2019). ANÁLISIS DE UNA PLACA BASE DE UNIÓN ENTRE COLUMNA DE CONCRETO-COLUMNA DE ACERO EN EL RANGO NO LINEAL ANALYSIS OF A JOINT BASE PLATE BETWEEN CONCRETE COLUMN-STEEL COLUMNS IN THE NON-LINEAR RANGE. https://doi.org/10.13140/rg.2.2.21271.83363
MLA 9
López, Nelson, et al. “ANÁLISIS DE UNA PLACA BASE DE UNIÓN ENTRE COLUMNA DE CONCRETO-COLUMNA DE ACERO EN EL RANGO NO LINEAL ANALYSIS OF A JOINT BASE PLATE BETWEEN CONCRETE COLUMN-STEEL COLUMNS IN THE NON-LINEAR RANGE.” vol. 20, no. 1, 2019. https://doi.org/10.13140/rg.2.2.21271.83363.
Chicago
López, Nelson, Ronald Ugel, and Reyes Indira Herrera. 2019. “ANÁLISIS DE UNA PLACA BASE DE UNIÓN ENTRE COLUMNA DE CONCRETO-COLUMNA DE ACERO EN EL RANGO NO LINEAL ANALYSIS OF A JOINT BASE PLATE BETWEEN CONCRETE COLUMN-STEEL COLUMNS IN THE NON-LINEAR RANGE.” https://doi.org/10.13140/rg.2.2.21271.83363.
Harvard
López, N., Ugel, R. and Herrera, R. I. (2019) ‘ANÁLISIS DE UNA PLACA BASE DE UNIÓN ENTRE COLUMNA DE CONCRETO-COLUMNA DE ACERO EN EL RANGO NO LINEAL ANALYSIS OF A JOINT BASE PLATE BETWEEN CONCRETE COLUMN-STEEL COLUMNS IN THE NON-LINEAR RANGE’. doi:10.13140/rg.2.2.21271.83363.
IEEE
N. López, R. Ugel, and R. I. Herrera, “ANÁLISIS DE UNA PLACA BASE DE UNIÓN ENTRE COLUMNA DE CONCRETO-COLUMNA DE ACERO EN EL RANGO NO LINEAL ANALYSIS OF A JOINT BASE PLATE BETWEEN CONCRETE COLUMN-STEEL COLUMNS IN THE NON-LINEAR RANGE,” vol. 20, no. 1, 2019, doi: 10.13140/rg.2.2.21271.83363.
BibTeX
@article{lopez2019lisis,
title = {{ANÁLISIS DE UNA PLACA BASE DE UNIÓN ENTRE COLUMNA DE CONCRETO-COLUMNA DE ACERO EN EL RANGO NO LINEAL ANALYSIS OF A JOINT BASE PLATE BETWEEN CONCRETE COLUMN-STEEL COLUMNS IN THE NON-LINEAR RANGE}},
author = {López, Nelson and Ugel, Ronald and Herrera, Reyes Indira},
year = {2019},
volume = {20},
number = {1},
doi = {10.13140/rg.2.2.21271.83363},
url = {https://doi.org/10.13140/rg.2.2.21271.83363}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Civil and Structural Engineering › Structural Load-Bearing Analysis
- beam-column joints
- base plate
- steel columns
- reinforced concrete beams
- monolithic connections
- cyclic loading
- hysteresis loops
- pseudo-static test
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
López, N., Ugel, R., & Herrera, R. I. (2019). ANÁLISIS DE UNA PLACA BASE DE UNIÓN ENTRE COLUMNA DE CONCRETO-COLUMNA DE ACERO EN EL RANGO NO LINEAL ANALYSIS OF A JOINT BASE PLATE BETWEEN CONCRETE COLUMN-STEEL COLUMNS IN THE NON-LINEAR RANGE. https://doi.org/10.13140/rg.2.2.21271.83363
How many times has this paper been cited?
1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at DOAJ (DOAJ: Directory of Open Access Journals): sign in and open the full text from this page.
Who wrote this paper?
Nelson López, Ronald Ugel, Reyes Indira Herrera.
What is the DOI of this paper?
10.13140/rg.2.2.21271.83363, permanently at https://doi.org/10.13140/rg.2.2.21271.83363. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.