Dissertation · 2021 · Open access
Análise do desempenho da técnica de reforço NSM (Near Surface Mounted) com fibras de carbono em vigas submetidas à flexão
LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · Published 10 March 2021
In brief
“Análise do desempenho da técnica de reforço NSM (Near Surface Mounted) com fibras de carbono em vigas submetidas à flexão” is a 2021 dissertation by Luísa Rocha Wierzbicki, published in LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas).
- Citations
- 1
- Most cited in
- 2026 (1)
- References
- 46
- Authors
- 1
Abstract
Reinforced concrete structures have been optimized for lower costs. With slender sections, such elements are more sensitive to material defects, executive or design errors, which can often lead to the appearance of pathologies. Thus, the need for reinforcement and recovery of reinforced concrete elements is increasingly frequent. Among the structural reinforcement methods used in Brazil, there is reinforcement with Carbon Fiber-Reinforced Polymer (CFRP). In this sense, it is proposed to analyze the performance of the Near Surface Mounted (NSM) technique for the application of carbon fiber composite reinforcement, in beams subjected to simple bending effort. For this, twenty-one samples were molded, nine with real dimensions – Group B (15x25x220cm) and twelve on a reduced scale – Group A (10x17.5x50cm), of beams without reinforcement application, with reinforcement of CFRP blanket applied externally – EBR technique (Externally Bonded Reinforcement) and with reinforcement of CFRP sheets applied in the concrete covering section – NSM technique. All rehabilitated beams were subjected to the four point bending test until the ultimate loads were obtained, for which comparisons were made between the reinforcement techniques and, also, the theoretical resistant capacities. Group A beams reinforced by the EBR technique resisted a load approximately 69% higher than the load supported by the reference beams, whereas those reinforced by the NSM technique presented a 46% higher load than the reference beams. In Group B, some samples of the beams reinforced by the EBR technique showed deficiency in the ruin load, a fact that led to an increase of only 6% in the resistant capacity, while for those reinforced with the NSM technique, was obtained a load increase of 36%, when compared to reference beams. In addition, there was also an increase in stiffness of the beams with the application of reinforcement by the two techniques studied. Still, from the Analysis of Variance (ANOVA) it was possible to verify that the reduced samples are statistically equal to those in real scale, being viable mainly for initial studies, because they allow the production of a greater quantity and variety of samples with the same quantity of inputs and also bring great advantages regarding the handling of parts.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Wierzbicki, L. R. (2021). Análise do desempenho da técnica de reforço NSM (Near Surface Mounted) com fibras de carbono em vigas submetidas à flexão. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://repositorio.utfpr.edu.br/jspui/handle/1/26146
MLA 9
Wierzbicki, Luísa Rocha. “Análise do desempenho da técnica de reforço NSM (Near Surface Mounted) com fibras de carbono em vigas submetidas à flexão.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2021. http://repositorio.utfpr.edu.br/jspui/handle/1/26146.
Chicago
Wierzbicki, Luísa Rocha. 2021. “Análise do desempenho da técnica de reforço NSM (Near Surface Mounted) com fibras de carbono em vigas submetidas à flexão.” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://repositorio.utfpr.edu.br/jspui/handle/1/26146.
Harvard
Wierzbicki, L. R. (2021) ‘Análise do desempenho da técnica de reforço NSM (Near Surface Mounted) com fibras de carbono em vigas submetidas à flexão’, LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). Available at: http://repositorio.utfpr.edu.br/jspui/handle/1/26146.
IEEE
L. R. Wierzbicki, “Análise do desempenho da técnica de reforço NSM (Near Surface Mounted) com fibras de carbono em vigas submetidas à flexão,” LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), 2021.
BibTeX
@phdthesis{wierzbicki2021lise,
title = {{Análise do desempenho da técnica de reforço NSM (Near Surface Mounted) com fibras de carbono em vigas submetidas à flexão}},
author = {Wierzbicki, Luísa Rocha},
year = {2021},
url = {http://repositorio.utfpr.edu.br/jspui/handle/1/26146}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Building and Construction › Structural Behavior of Reinforced Concrete
- near-surface mounted reinforcement
- carbon fiber reinforced polymer
- externally bonded reinforcement
- reinforced concrete beams
- flexural strengthening
- four-point bending
- ultimate load capacity
- stiffness enhancement
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Wierzbicki, L. R. (2021). Análise do desempenho da técnica de reforço NSM (Near Surface Mounted) com fibras de carbono em vigas submetidas à flexão. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). http://repositorio.utfpr.edu.br/jspui/handle/1/26146
How many times has this paper been cited?
1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas): sign in and open the full text from this page.
Who wrote this paper?
Luísa Rocha Wierzbicki.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.