Dissertation · 2017 · Open access
Análise de juntas soldadas de aço API 5L X-70 com laser Nd: YAG pulsado
Americanae (AECID Library) · Published 17 February 2017
In brief
“Análise de juntas soldadas de aço API 5L X-70 com laser Nd: YAG pulsado” is a 2017 dissertation by Willian Valicelli Sanitá, published in Americanae (AECID Library). OpenAlex counts 1 citations as of 22 November 2026. It is open access: the full text is free to read at Americanae (AECID Library).
- Citations
- 1
- Most cited in
- 2023 (1)
- References
- 15
- Authors
- 1
Abstract
We carried out a study of laser welding provided "bead on plate" in micro-alloyed steel ARBL API 5L Gr. X70 in the form of plates with 1,0 x 20 x 120 mm (H x W x D). 12 welds was performed in argonic gas flow of 15 l/min, beam diameter 0,2 mm, angle of 90°, repetition rate of 9, 8, 7, 6 and 5 Hz, welding speed of 1 mm/s, gas depths focus equal to 0,57 mm below the surface of the workpiece and the pulse energy (Ep) set at 10,0 J. The time width (Lt) set at 10 ms. The heat input was varied at 90, 80, 70, 60 and 50 J/mm. The results were analyzed based on the relationship between power, weld bead geometry, corrosion, Vickers hardness, chemical analysis and microstructure. For structure revelation of the weld metals used both Nital 5%. Measures of geometry (width and depth) of the weld beads were made using images taken by digital camera on an ordinary optical microscope. Microscopy tests were carried out using a scanning electron microscope in a backscattered detector (BSD), in order to verify with greater clarity the microstructures of the samples. For verification of mechanical strength was tensile test on samples and base metal without notch insertion. For verification of hardness were analyzed four parameters being three horizontal lines and a vertical line in the center of the weld bead. To verify the corrosion, a potentiostat test was conducted for potentiodynamic polarization test where the polarization curves were analyzed. The greatest values of depth width were found in higher values of power and temporal width. The microstructures of the samples showed formations of acicular ferrite, allotriomorphic ferrite and possible high martensite contents in the case of samples with lower heat input (60 and 50 J / mm). All samples showed higher mechanical strength than the base metal, since all of them broke in the base metal. The coefficients of hardness were higher for samples with lower thermal input. The corrosion resistance remained close to the base metal and some higher cases (Ap 70 J / mm), since a passive oxide film probably formed after welding, resulting in higher strength.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Sanitá, W. V. (2017). Análise de juntas soldadas de aço API 5L X-70 com laser Nd: YAG pulsado. Americanae (AECID Library). http://hdl.handle.net/11449/149831
MLA 9
Sanitá, Willian Valicelli. “Análise de juntas soldadas de aço API 5L X-70 com laser Nd: YAG pulsado.” Americanae (AECID Library), 2017. http://hdl.handle.net/11449/149831.
Chicago
Sanitá, Willian Valicelli. 2017. “Análise de juntas soldadas de aço API 5L X-70 com laser Nd: YAG pulsado.” Americanae (AECID Library). http://hdl.handle.net/11449/149831.
Harvard
Sanitá, W. V. (2017) ‘Análise de juntas soldadas de aço API 5L X-70 com laser Nd: YAG pulsado’, Americanae (AECID Library). Available at: http://hdl.handle.net/11449/149831.
IEEE
W. V. Sanitá, “Análise de juntas soldadas de aço API 5L X-70 com laser Nd: YAG pulsado,” Americanae (AECID Library), 2017.
BibTeX
@phdthesis{sanita2017lise,
title = {{Análise de juntas soldadas de aço API 5L X-70 com laser Nd: YAG pulsado}},
author = {Sanitá, Willian Valicelli},
year = {2017},
url = {http://hdl.handle.net/11449/149831}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- Nd:YAG laser welding
- pulsed laser welding
- API 5L X70 steel
- microalloyed steel
- bead-on-plate
- heat input
- weld bead geometry
- Vickers hardness
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Sanitá, W. V. (2017). Análise de juntas soldadas de aço API 5L X-70 com laser Nd: YAG pulsado. Americanae (AECID Library). http://hdl.handle.net/11449/149831
How many times has this paper been cited?
1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Americanae (AECID Library): sign in and open the full text from this page.
Who wrote this paper?
Willian Valicelli Sanitá.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.