Dissertation · 2016 · Open access

Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW)

Bruno Antonio Sorrija

Americanae (AECID Library) · Published 13 April 2016

Open full textCite this paper

In brief

“Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW)” is a 2016 dissertation by Bruno Antonio Sorrija, published in Americanae (AECID Library). OpenAlex counts 1 citations as of 22 November 2026. It is open access: the full text is free to read at Americanae (AECID Library).

Citations
1
Most cited in
2017 (1)
References
39
Authors
1

Abstract

Steel pipes, used in the oil and gas industry in prospection and exploration activities, are often subjected to cyclic loading during their transportation (transit fatigue) and during their service life. Considering this, these steel pipes must have excellent structural integrity in order to avoid premature failure by fatigue mechanisms. However, the HFIW manufacturing process, widely used by the industry, involves mechanical forming and welding and, therefore, defects are inherently present in the finished products, remarkably an interface between the edges of the steel sheets that are welded into tubes. In this work it has been investigated how the HFIW manufacturing process can reduce the fatigue resistance of API 5CT N80 type Q steel tubes and lead to a mechanical anisotropy of the finished product. To keep the specimens characteristics closer to the real steel pipes, axial fatigue tests have been performed with round specimens which had their thickness equal to the thickness of the walls of the pipes from which they had been taken from. It has been developed also a device and a method to test small length sections of steel tubes, which have shown potential to be used in the future as a new methodology for the study of fatigue in steel pipes. The results of the axial fatigue tests (carried out to compare the welded joint to a position situated 90° from it) indicate that the welded joint can act as a stress raiser and contributes to reduce the fatigue resistance of the steel pipes, in a inversely proportional relationship with the increasing of the applied dynamic loading. It has been observed also that some defects, which result from the manufacturing process, can act as points for the nucleation of fatigue cracks and, for this, they should not be present in the manufactured product. Tensile tests, metallographic analysis, fractography study and microhardness tests had been carried out to complement the fatigue tests results.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Sorrija, B. A. (2016). Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW). Americanae (AECID Library). http://hdl.handle.net/11449/138843

MLA 9

Sorrija, Bruno Antonio. “Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW).” Americanae (AECID Library), 2016. http://hdl.handle.net/11449/138843.

Chicago

Sorrija, Bruno Antonio. 2016. “Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW).” Americanae (AECID Library). http://hdl.handle.net/11449/138843.

Harvard

Sorrija, B. A. (2016) ‘Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW)’, Americanae (AECID Library). Available at: http://hdl.handle.net/11449/138843.

IEEE

B. A. Sorrija, “Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW),” Americanae (AECID Library), 2016.

BibTeX

@phdthesis{sorrija2016lise,
  title     = {{Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW)}},
  author    = {Sorrija, Bruno Antonio},
  year      = {2016},
  url       = {http://hdl.handle.net/11449/138843}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Fatigue and fracture mechanics

  • fatigue resistance
  • steel pipes
  • high-frequency induction welding
  • welded joints
  • stress concentrators
  • fatigue crack nucleation
  • manufacturing defects
  • mechanical anisotropy

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Sorrija, B. A. (2016). Análise da resistência à fadiga de tubos de aço API 5CT N80 Tipo Q soldados via processo de indução magnética de alta frequência (HFIW). Americanae (AECID Library). http://hdl.handle.net/11449/138843

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Americanae (AECID Library): sign in and open the full text from this page.

Who wrote this paper?

Bruno Antonio Sorrija.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.