Book chapter · 2018 · Open access

An SU-8 Microgripper Based on the Cascaded V-Shaped Electrothermal Actuators: Design, Fabrication, Simulation and Experimental Investigations

Rodica Cristina Voicu

InTech eBooks · Published 11 July 2018 · DOI 10.5772/intechopen.75544

Open PDFView at the publisherCite this paper

In brief

“An SU-8 Microgripper Based on the Cascaded V-Shaped Electrothermal Actuators: Design, Fabrication, Simulation and Experimental Investigations” is a 2018 book chapter by Rodica Cristina Voicu, published in InTech eBooks. OpenAlex counts 5 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at InTech eBooks.

Citations
5
Most cited in
2020 (1)
Field-weighted impact
0.80
References
23
Authors
1

Abstract

This chapter presents the design, fabrication, numerical simulations and experimental investigations of a polymeric microgripper designed using the cascaded V-shaped electrothermal actuators. The microgripper has a total length around 1 mm and a total thickness of only 20 μm. The microgripper was simulated using electro-thermo-mechanical finite element method (FEM) in order to check the performance of the gripper. As structural material of the microgripper, the SU-8 biocompatible polymer was used during the fabrication process. A fabrication process was implemented to realize the microgripper using a symmetrically sandwich structure. The metallic micro-heaters were encapsulated in the polymeric actuation structure of the microgrippers to reduce the undesirable out-of-plane displacement of the gripper tips and the mechanical stress, to improve the thermal efficiency, and for obtaining the electrical isolation of the structure. Experimental testing has been performed to determine the openings and the temperatures of the microgripper tips as function of electrical current. A displacement of the tips of more than 50 μm can be obtained at an electrical current of around 26–28 mA. A comparison between the simulation results and the measurements were also presented.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Voicu, R. C. (2018). An SU-8 Microgripper Based on the Cascaded V-Shaped Electrothermal Actuators: Design, Fabrication, Simulation and Experimental Investigations. InTech eBooks. https://doi.org/10.5772/intechopen.75544

MLA 9

Voicu, Rodica Cristina. “An SU-8 Microgripper Based on the Cascaded V-Shaped Electrothermal Actuators: Design, Fabrication, Simulation and Experimental Investigations.” InTech eBooks, 2018. https://doi.org/10.5772/intechopen.75544.

Chicago

Voicu, Rodica Cristina. 2018. “An SU-8 Microgripper Based on the Cascaded V-Shaped Electrothermal Actuators: Design, Fabrication, Simulation and Experimental Investigations.” InTech eBooks. https://doi.org/10.5772/intechopen.75544.

Harvard

Voicu, R. C. (2018) ‘An SU-8 Microgripper Based on the Cascaded V-Shaped Electrothermal Actuators: Design, Fabrication, Simulation and Experimental Investigations’, InTech eBooks. doi:10.5772/intechopen.75544.

IEEE

R. C. Voicu, “An SU-8 Microgripper Based on the Cascaded V-Shaped Electrothermal Actuators: Design, Fabrication, Simulation and Experimental Investigations,” InTech eBooks, 2018, doi: 10.5772/intechopen.75544.

BibTeX

@incollection{voicu2018microgripper,
  title     = {{An SU-8 Microgripper Based on the Cascaded V-Shaped Electrothermal Actuators: Design, Fabrication, Simulation and Experimental Investigations}},
  author    = {Voicu, Rodica Cristina},
  booktitle = {InTech eBooks},
  year      = {2018},
  doi       = {10.5772/intechopen.75544},
  url       = {https://doi.org/10.5772/intechopen.75544}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202011
202211
202311
202411
202511

Its field-weighted citation impact is 0.80: it has been cited 0.80 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced MEMS and NEMS Technologies

  • microgripper
  • electrothermal actuator
  • SU-8 polymer
  • sandwich structures
  • microheaters
  • tip displacement
  • biocompatible polymers
  • microfabrication

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Voicu, R. C. (2018). An SU-8 Microgripper Based on the Cascaded V-Shaped Electrothermal Actuators: Design, Fabrication, Simulation and Experimental Investigations. InTech eBooks. https://doi.org/10.5772/intechopen.75544

How many times has this paper been cited?

5 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at InTech eBooks: sign in and open the PDF from this page.

Who wrote this paper?

Rodica Cristina Voicu.

What is the DOI of this paper?

10.5772/intechopen.75544, permanently at https://doi.org/10.5772/intechopen.75544. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.