Journal article · 2026 · Open access
An Experimental Study on Comparative Performance Analysis of Surface Milling of Ti-6Al-4V Titanium Alloy Using Coated Cutting Tools
Coatings, 16(9), 1090 · Published 14 September 2026 · DOI 10.3390/coatings16091090
In brief
“An Experimental Study on Comparative Performance Analysis of Surface Milling of Ti-6Al-4V Titanium Alloy Using Coated Cutting Tools” is a 2026 journal article by M. Hüsnü Dirikolu and Şakir Altınsoy, published in Coatings. OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at Coatings.
- Citations
- 0
- References
- 68
- Authors
- 2
Abstract
This study comparatively evaluates the performance of coated cutting tools in machining Ti6Al4V titanium alloy, which is widely used in the aerospace and defense industries as well as in biomedical applications. Surface milling operations were performed under both dry and wet conditions using Al-Ti-N, Al-Ti-N/Ti-Si-N, Al-Cr-N, Al-Ti-Si-N, and uncoated tungsten carbide tools. The data obtained were analyzed based on tool wear, surface roughness, and chip formation. The results demonstrate that coating type and cutting parameters significantly affect tool life and surface quality. This study aims to contribute to tool selection processes for the above-mentioned industrial applications.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Dirikolu, M. H., & Altınsoy, Ş. (2026). An Experimental Study on Comparative Performance Analysis of Surface Milling of Ti-6Al-4V Titanium Alloy Using Coated Cutting Tools. Coatings, 16(9), 1090. https://doi.org/10.3390/coatings16091090
MLA 9
Dirikolu, M. Hüsnü, and Şakir Altınsoy. “An Experimental Study on Comparative Performance Analysis of Surface Milling of Ti-6Al-4V Titanium Alloy Using Coated Cutting Tools.” Coatings, vol. 16, no. 9, 2026, p. 1090. https://doi.org/10.3390/coatings16091090.
Chicago
Dirikolu, M. Hüsnü and Şakir Altınsoy. 2026. “An Experimental Study on Comparative Performance Analysis of Surface Milling of Ti-6Al-4V Titanium Alloy Using Coated Cutting Tools.” Coatings 16 (9): 1090. https://doi.org/10.3390/coatings16091090.
Harvard
Dirikolu, M. H. and Altınsoy, Ş. (2026) ‘An Experimental Study on Comparative Performance Analysis of Surface Milling of Ti-6Al-4V Titanium Alloy Using Coated Cutting Tools’, Coatings, 16(9), p. 1090. doi:10.3390/coatings16091090.
IEEE
M. H. Dirikolu and Ş. Altınsoy, “An Experimental Study on Comparative Performance Analysis of Surface Milling of Ti-6Al-4V Titanium Alloy Using Coated Cutting Tools,” Coatings, vol. 16, no. 9, p. 1090, 2026, doi: 10.3390/coatings16091090.
BibTeX
@article{dirikolu2026experimental,
title = {{An Experimental Study on Comparative Performance Analysis of Surface Milling of Ti-6Al-4V Titanium Alloy Using Coated Cutting Tools}},
author = {Dirikolu, M. Hüsnü and Altınsoy, Şakir},
journal = {Coatings},
year = {2026},
volume = {16},
number = {9},
pages = {1090},
doi = {10.3390/coatings16091090},
url = {https://doi.org/10.3390/coatings16091090}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization
- Ti-6Al-4V
- titanium alloy machining
- surface milling
- coated cutting tools
- tungsten carbide tools
- dry machining
- wet machining
- tool wear
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Dirikolu, M. H., & Altınsoy, Ş. (2026). An Experimental Study on Comparative Performance Analysis of Surface Milling of Ti-6Al-4V Titanium Alloy Using Coated Cutting Tools. Coatings, 16(9), 1090. https://doi.org/10.3390/coatings16091090
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Coatings: sign in and open the full text from this page.
Who wrote this paper?
M. Hüsnü Dirikolu, Şakir Altınsoy.
What is the DOI of this paper?
10.3390/coatings16091090, permanently at https://doi.org/10.3390/coatings16091090. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.