Journal article · 2012 · Open access

Amorphous Silicon Single-Junction Thin-Film Solar Cell Exceeding 10 % Efficiency by Design Optimization

Mohammed Ikbal Kabir, Seyed Ahmad Shahahmadi, Victor Lim, Saleem Hussain Zaidi, Kamaruzzaman Sopian, Nowshad Amin

International Journal of Photoenergy, 2012, 1–7 · Published 1 January 2012 · DOI 10.1155/2012/460919

Free PDFView at the publisherCite this paper

In brief

“Amorphous Silicon Single-Junction Thin-Film Solar Cell Exceeding 10 % Efficiency by Design Optimization” is a 2012 journal article by Mohammed Ikbal Kabir and 5 co-authors, published in International Journal of Photoenergy. OpenAlex counts 71 citations as of 16 November 2026. It is open access under a CC BY licence: the full text is free to read at International Journal of Photoenergy.

Citations
71
Most cited in
2017 (10)
Field-weighted impact
1.37
References
30
Authors
6

Abstract

The conversion efficiency of a solar cell can substantially be increased by improved material properties and associated designs. At first, this study has adopted AMPS-1D (analysis of microelectronic and photonic structures) simulation technique to design and optimize the cell parameters prior to fabrication, where the optimum design parameters can be validated. Solar cells of single junction based on hydrogenated amorphous silicon (a-Si:H) have been analyzed by using AMPS-1D simulator. The investigation has been made based on important model parameters such as thickness, doping concentrations, bandgap, and operating temperature and so forth. The efficiency of single junction a-Si:H can be achieved as high as over 19% after parametric optimization in the simulation, which might seem unrealistic with presently available technologies. Therefore, the numerically designed and optimized a-SiC:H/a-SiC:H-buffer/a-Si:H/a-Si:H solar cells have been fabricated by using PECVD (plasma-enhanced chemical vapor deposition), where the best initial conversion efficiency of 10.02% has been achieved ( V, mA/cm2 and ) for a small area cell (0.086 cm2). The quantum efficiency (QE) characteristic shows the cell’s better spectral response in the wavelength range of 400 nm–650 nm, which proves it to be a potential candidate as the middle cell in a-Si-based multijunction structures.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Kabir, M. I., Shahahmadi, S. A., Lim, V., Zaidi, S. H., Sopian, K., & Amin, N. (2012). Amorphous Silicon Single-Junction Thin-Film Solar Cell Exceeding 10 % Efficiency by Design Optimization. International Journal of Photoenergy, 2012, 1–7. https://doi.org/10.1155/2012/460919

MLA 9

Kabir, Mohammed Ikbal, et al. “Amorphous Silicon Single-Junction Thin-Film Solar Cell Exceeding 10 % Efficiency by Design Optimization.” International Journal of Photoenergy, vol. 2012, 2012, pp. 1–7. https://doi.org/10.1155/2012/460919.

Chicago

Kabir, Mohammed Ikbal, Seyed Ahmad Shahahmadi, Victor Lim, Saleem Hussain Zaidi, Kamaruzzaman Sopian, and Nowshad Amin. 2012. “Amorphous Silicon Single-Junction Thin-Film Solar Cell Exceeding 10 % Efficiency by Design Optimization.” International Journal of Photoenergy 2012: 1–7. https://doi.org/10.1155/2012/460919.

Harvard

Kabir, M. I. et al. (2012) ‘Amorphous Silicon Single-Junction Thin-Film Solar Cell Exceeding 10 % Efficiency by Design Optimization’, International Journal of Photoenergy, 2012, pp. 1–7. doi:10.1155/2012/460919.

IEEE

M. I. Kabir, S. A. Shahahmadi, V. Lim, S. H. Zaidi, K. Sopian, and N. Amin, “Amorphous Silicon Single-Junction Thin-Film Solar Cell Exceeding 10 % Efficiency by Design Optimization,” International Journal of Photoenergy, vol. 2012, pp. 1–7, 2012, doi: 10.1155/2012/460919.

BibTeX

@article{kabir2012amorphous,
  title     = {{Amorphous Silicon Single-Junction Thin-Film Solar Cell Exceeding 10 \% Efficiency by Design Optimization}},
  author    = {Kabir, Mohammed Ikbal and Shahahmadi, Seyed Ahmad and Lim, Victor and Zaidi, Saleem Hussain and Sopian, Kamaruzzaman and Amin, Nowshad},
  journal   = {International Journal of Photoenergy},
  year      = {2012},
  volume    = {2012},
  pages     = {1--7},
  doi       = {10.1155/2012/460919},
  url       = {https://doi.org/10.1155/2012/460919}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
20171010
201844
201955
202066
20211010
202299
202344
202433
202544
202633

Its field-weighted citation impact is 1.37: it has been cited 1.37 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies

  • hydrogenated amorphous silicon
  • thin-film solar cells
  • single-junction solar cells
  • conversion efficiency
  • AMPS-1D simulation
  • parameter optimization
  • quantum efficiency
  • spectral response

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Kabir, M. I., Shahahmadi, S. A., Lim, V., Zaidi, S. H., Sopian, K., & Amin, N. (2012). Amorphous Silicon Single-Junction Thin-Film Solar Cell Exceeding 10 % Efficiency by Design Optimization. International Journal of Photoenergy, 2012, 1–7. https://doi.org/10.1155/2012/460919

How many times has this paper been cited?

71 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at International Journal of Photoenergy.

Who wrote this paper?

Mohammed Ikbal Kabir, Seyed Ahmad Shahahmadi, Victor Lim, Saleem Hussain Zaidi, Kamaruzzaman Sopian, Nowshad Amin.

What is the DOI of this paper?

10.1155/2012/460919. The permanent link is https://doi.org/10.1155/2012/460919.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.