Dissertation · 2015 · Open access
Alívio de tensões residuais em junta soldada com arame de baixa temperatura de transformação martensítica
Americanae (AECID Library) · Published 1 January 2015
In brief
“Alívio de tensões residuais em junta soldada com arame de baixa temperatura de transformação martensítica” is a 2015 dissertation by Francisco José dos Santos Oliveira, published in Americanae (AECID Library). OpenAlex counts 0 citations as of 22 November 2026. It is open access: the full text is free to read at Americanae (AECID Library).
- Citations
- 0
- Authors
- 1
Abstract
The multi-pass welding of thick plates imposes to the welded joint a state of residual stresses that can be very harmful when they are in service. There are various phenomena that can alter the levels of residual stresses after materials welding; one of them is phase transformation. This work presents a comparative study of the levels of residual stresses in three welded joints, produced with different filler metals by Flux Cored Arc Welding (FCAW). A martensitic stainless steel wire Fe-12% Cr-5% Ni with low transformation temperature was the first to be used. After this an austenitic stainless steel Fe-18.5% Cr-10% Ni was used and finally a low alloy steel Fe -1.25% Cr-0.5% Mo. In the welding process, we used a workbench robot with multiprocess source for making joints, and the AISI 4140 the base metal.. Residual stresses were measured on the surface of welded joints using X-ray diffraction method. Tensile strength, toughness and hardness, as well as the resultant microstructure in weld metal, heat affected zone and base metal were evaluated. The results showed that the joint produced with wire electrode that has undergone low temperature martensitic transformation presents significant levels of compressive residual stress, unlike the other joints which present tensile residual stress at most of the measured points. In tensile tests, the joint of martensitic stainless steel showed high yield limits and tensile strength, and its rupture occurred at the interface between base metal and weld metal. Results of the impact tests of this joint showed relatively low absorbed energy values at the weld metal and heat affected zone.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Oliveira, F. J. D. S. (2015). Alívio de tensões residuais em junta soldada com arame de baixa temperatura de transformação martensítica. Americanae (AECID Library). http://www.repositorio.ufc.br/handle/riufc/15472
MLA 9
Oliveira, Francisco José dos Santos. “Alívio de tensões residuais em junta soldada com arame de baixa temperatura de transformação martensítica.” Americanae (AECID Library), 2015. http://www.repositorio.ufc.br/handle/riufc/15472.
Chicago
Oliveira, Francisco José dos Santos. 2015. “Alívio de tensões residuais em junta soldada com arame de baixa temperatura de transformação martensítica.” Americanae (AECID Library). http://www.repositorio.ufc.br/handle/riufc/15472.
Harvard
Oliveira, F. J. D. S. (2015) ‘Alívio de tensões residuais em junta soldada com arame de baixa temperatura de transformação martensítica’, Americanae (AECID Library). Available at: http://www.repositorio.ufc.br/handle/riufc/15472.
IEEE
F. J. D. S. Oliveira, “Alívio de tensões residuais em junta soldada com arame de baixa temperatura de transformação martensítica,” Americanae (AECID Library), 2015.
BibTeX
@phdthesis{oliveira2015tens,
title = {{Alívio de tensões residuais em junta soldada com arame de baixa temperatura de transformação martensítica}},
author = {Oliveira, Francisco José dos Santos},
year = {2015},
url = {http://www.repositorio.ufc.br/handle/riufc/15472}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- residual stress reduction
- welded joints
- flux-cored arc welding
- phase transformation
- heat-affected zone
- tensile strength
- impact toughness
- hardness
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Oliveira, F. J. D. S. (2015). Alívio de tensões residuais em junta soldada com arame de baixa temperatura de transformação martensítica. Americanae (AECID Library). http://www.repositorio.ufc.br/handle/riufc/15472
How many times has this paper been cited?
0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Americanae (AECID Library): sign in and open the full text from this page.
Who wrote this paper?
Francisco José dos Santos Oliveira.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.