Journal article · 2014 · Open access

AISI D2 Soğuk İş Takım Çeliğinin Frezelenmesinde Yüzey Pürüzlülüğünün Taguchi Metodu İle Optimizasyonu

Emine Şirin, Şenol Şirin, Yakup Turgut, İhsan Korkut

Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 3(1) · Published 1 December 2014

Open full textCite this paper

In brief

“AISI D2 Soğuk İş Takım Çeliğinin Frezelenmesinde Yüzey Pürüzlülüğünün Taguchi Metodu İle Optimizasyonu” is a 2014 journal article by Emine Şirin and 3 co-authors, published in Düzce Üniversitesi Bilim ve Teknoloji Dergisi. OpenAlex counts 13 citations as of 22 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at Düzce Üniversitesi Bilim ve Teknoloji Dergisi.

Citations
13
Most cited in
2021 (3)
Field-weighted impact
0.72
References
1
Authors
4

Abstract

Surface quality significantly affect to efficient and life of working machine parts that are contacted one another. There are important factors affecting to surface roughness such as cutting tool, processed material, cutting parameters. For this reason, appropriate processing conditions determined and the processing parameters must be optimized. In this study, AISI D2 cold work tool steel of different hardness was applied in dry machining conditions with symmetric milling method. Optimum processing conditions were determined and surface roughness were investigated depending on the cutting parameters. Experiments were carried out using Taguchi’s L9 orthogonal array and evaluation of experiment results have based on the signal/noise (S/N) rate. Optimal surface roughness values were determined using the Taguchi optimization. Analysis of variance (Anova) was used to determine the effects on the results of the control factors. According to the Anova results, the most significant variables affecting on surface roughness was determined cutting speed and feed rate respectively. Verification experiments made and optimization have been identified application of successfully

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Şirin, E., Şirin, Ş., Turgut, Y., & Korkut, İ. (2014). AISI D2 Soğuk İş Takım Çeliğinin Frezelenmesinde Yüzey Pürüzlülüğünün Taguchi Metodu İle Optimizasyonu. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 3(1). https://dergipark.org.tr/en/pub/dubited/article/66260

MLA 9

Şirin, Emine, et al. “AISI D2 Soğuk İş Takım Çeliğinin Frezelenmesinde Yüzey Pürüzlülüğünün Taguchi Metodu İle Optimizasyonu.” Düzce Üniversitesi Bilim ve Teknoloji Dergisi, vol. 3, no. 1, 2014. https://dergipark.org.tr/en/pub/dubited/article/66260.

Chicago

Şirin, Emine, Şenol Şirin, Yakup Turgut, and İhsan Korkut. 2014. “AISI D2 Soğuk İş Takım Çeliğinin Frezelenmesinde Yüzey Pürüzlülüğünün Taguchi Metodu İle Optimizasyonu.” Düzce Üniversitesi Bilim ve Teknoloji Dergisi 3 (1). https://dergipark.org.tr/en/pub/dubited/article/66260.

Harvard

Şirin, E. et al. (2014) ‘AISI D2 Soğuk İş Takım Çeliğinin Frezelenmesinde Yüzey Pürüzlülüğünün Taguchi Metodu İle Optimizasyonu’, Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 3(1). Available at: https://dergipark.org.tr/en/pub/dubited/article/66260.

IEEE

E. Şirin, Ş. Şirin, Y. Turgut, and İ. Korkut, “AISI D2 Soğuk İş Takım Çeliğinin Frezelenmesinde Yüzey Pürüzlülüğünün Taguchi Metodu İle Optimizasyonu,” Düzce Üniversitesi Bilim ve Teknoloji Dergisi, vol. 3, no. 1, 2014.

BibTeX

@article{sirin2014aisi,
  title     = {{AISI D2 Soğuk İş Takım Çeliğinin Frezelenmesinde Yüzey Pürüzlülüğünün Taguchi Metodu İle Optimizasyonu}},
  author    = {Şirin, Emine and Şirin, Şenol and Turgut, Yakup and Korkut, İhsan},
  journal   = {Düzce Üniversitesi Bilim ve Teknoloji Dergisi},
  year      = {2014},
  volume    = {3},
  number    = {1},
  url       = {https://dergipark.org.tr/en/pub/dubited/article/66260}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201511
201611
201811
201922
202022
202133
202222
202411

Its field-weighted citation impact is 0.72: it has been cited 0.72 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Advanced machining processes and optimization

  • AISI D2 tool steel
  • cold work tool steel
  • surface roughness
  • dry machining
  • cutting parameters
  • cutting speed
  • feed rate
  • Taguchi method

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Şirin, E., Şirin, Ş., Turgut, Y., & Korkut, İ. (2014). AISI D2 Soğuk İş Takım Çeliğinin Frezelenmesinde Yüzey Pürüzlülüğünün Taguchi Metodu İle Optimizasyonu. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 3(1). https://dergipark.org.tr/en/pub/dubited/article/66260

How many times has this paper been cited?

13 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Düzce Üniversitesi Bilim ve Teknoloji Dergisi: sign in and open the full text from this page.

Who wrote this paper?

Emine Şirin, Şenol Şirin, Yakup Turgut, İhsan Korkut.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.