Paper · 2012 · Open access
Absorber Layer Thickness Optimization of a-Si:H/a-SiGe:H/μc-Si Solar Cell with Intermediate ZnO Layer
EU PVSEC, 2566–2569 · Published 1 January 2012 · DOI 10.4229/27theupvsec2012-3dv.1.43
In brief
“Absorber Layer Thickness Optimization of a-Si:H/a-SiGe:H/μc-Si Solar Cell with Intermediate ZnO Layer” is a 2012 paper by Shabbir S. Bohra and Ashish K. Panchal, published in EU PVSEC. OpenAlex counts 0 citations as of 16 November 2026. It is open access: the full text is free to read at EU PVSEC.
- Citations
- 0
- Authors
- 2
Abstract
In this paper, the major issue of current matching in triple-junction silicon solar cell has been addressed with i-layer thickness optimization at Maximum-Power-Point(MPP) using simulation and scripting. A performance of triple-junction(a-Si/a-SiGe/μc-Si) silicon solar cell has been analyzed with various i-layer thicknesses of sub-cells. The use of existing models developed for single-junction solar cell, are extended for multi-junction solar cell. In modeling of multi-junction cell, a common model for top and middle sub-cell and another model for bottom sub-cell are used. The cell is modeled on MATLAB® platform. The primary objective of this work is to obtain the optimized sub-cell thicknesses operating at or near MPP. To estimate the optical performance improvement in cell performance and reduction in light induced degradation effect in top a-Si sub-cell, an intermediate reflector layer(40 nm) is incorporated between top a-Si sub-cell and middle a-SiGe sub-cell. The sub-cell’s current expressions are solved using numerical technique. The optimized thicknesses are obtained for top a-Si i-layer with and without ZnO Intermediate Reflector(ZIR) layer at MPP are 120 nm and 140 nm respectively. The Pmpp has improved from 11.51mW/cm2 to 11.63mW/cm2 and FF from 72% to 77% for without and with ZIR layer insertion respectively.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Bohra, S. S., & Panchal, A. K. (2012). Absorber Layer Thickness Optimization of a-Si:H/a-SiGe:H/μc-Si Solar Cell with Intermediate ZnO Layer. EU PVSEC, 2566–2569. https://doi.org/10.4229/27theupvsec2012-3dv.1.43
MLA 9
Bohra, Shabbir S., and Ashish K. Panchal. “Absorber Layer Thickness Optimization of a-Si:H/a-SiGe:H/μc-Si Solar Cell with Intermediate ZnO Layer.” EU PVSEC, 2012, pp. 2566–2569. https://doi.org/10.4229/27theupvsec2012-3dv.1.43.
Chicago
Bohra, Shabbir S. and Ashish K. Panchal. 2012. “Absorber Layer Thickness Optimization of a-Si:H/a-SiGe:H/μc-Si Solar Cell with Intermediate ZnO Layer.” EU PVSEC: 2566–2569. https://doi.org/10.4229/27theupvsec2012-3dv.1.43.
Harvard
Bohra, S. S. and Panchal, A. K. (2012) ‘Absorber Layer Thickness Optimization of a-Si:H/a-SiGe:H/μc-Si Solar Cell with Intermediate ZnO Layer’, EU PVSEC, pp. 2566–2569. doi:10.4229/27theupvsec2012-3dv.1.43.
IEEE
S. S. Bohra and A. K. Panchal, “Absorber Layer Thickness Optimization of a-Si:H/a-SiGe:H/μc-Si Solar Cell with Intermediate ZnO Layer,” EU PVSEC, pp. 2566–2569, 2012, doi: 10.4229/27theupvsec2012-3dv.1.43.
BibTeX
@article{bohra2012absorber,
title = {{Absorber Layer Thickness Optimization of a-Si:H/a-SiGe:H/μc-Si Solar Cell with Intermediate ZnO Layer}},
author = {Bohra, Shabbir S. and Panchal, Ashish K.},
journal = {EU PVSEC},
year = {2012},
pages = {2566--2569},
doi = {10.4229/27theupvsec2012-3dv.1.43},
url = {https://doi.org/10.4229/27theupvsec2012-3dv.1.43}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon and Solar Cell Technologies
- triple-junction solar cells
- amorphous silicon
- microcrystalline silicon
- zinc oxide
- current matching
- maximum power point
- light-induced degradation
- optical performance
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Bohra, S. S., & Panchal, A. K. (2012). Absorber Layer Thickness Optimization of a-Si:H/a-SiGe:H/μc-Si Solar Cell with Intermediate ZnO Layer. EU PVSEC, 2566–2569. https://doi.org/10.4229/27theupvsec2012-3dv.1.43
How many times has this paper been cited?
0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at EU PVSEC.
Who wrote this paper?
Shabbir S. Bohra, Ashish K. Panchal.
What is the DOI of this paper?
10.4229/27theupvsec2012-3dv.1.43. The permanent link is https://doi.org/10.4229/27theupvsec2012-3dv.1.43.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.