Journal article · 2022 · Open access
Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel
European Mechanical Science, 6(1), 39–46 · Published 10 February 2022 · DOI 10.26701/ems.950427
In brief
“Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel” is a 2022 journal article by Mine Sulak and 4 co-authors, published in European Mechanical Science. OpenAlex counts 0 citations as of 17 November 2026. It is open access under a CC BY licence: the full text is free to read at European Mechanical Science.
- Citations
- 0
- References
- 10
- Authors
- 5
Abstract
In this study, the effect of nano-TiN layer obtained by PVD method on tribological behaviour of X210Cr12 (1.2080, AISI D3) cold work tool steel was investigated. Coating process was carried out by cathodic-arc PVD method using 200 V voltage, 350 °C temperature, 4x10-4 mbar pressure, and 50 A current application conditions. The characterization of the coating was carried out by FESEM and SEM-EDS analysis. The coated and uncoated samples were subjected to abrasive wear test against to 220 mesh sandpaper under 3 different loads (5, 10, and 20 N). The tests were applied at three different sliding distances (100 m, 200 m, and 600 m) keeping the sliding speed as constant at 2,6 m/s. For uncoated samples, while the applied load increased from 5 N to 20 N, the approximate wear loss increased by 10 and 8.5 times, respectively. The approximate wear loss increased by 2.2 and 12.2 times, respectively in nano-TiN coated samples. When compared to the coated and uncoated samples, the wear loss values obtained in the coated samples at sliding distances of 100 m and 200 m differed greatly from uncoated samples, under same conditions almost 100%. However, when the sliding distance reached 600 m, the gap started to close and the gap decreased to 30%.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Sulak, M., Onar, V., Işıtan, A., ÖZ, H., & ALİ, Y. A. (2022). Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel. European Mechanical Science, 6(1), 39–46. https://doi.org/10.26701/ems.950427
MLA 9
Sulak, Mine, et al. “Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel.” European Mechanical Science, vol. 6, no. 1, 2022, pp. 39–46. https://doi.org/10.26701/ems.950427.
Chicago
Sulak, Mine, Volkan Onar, Arzum Işıtan, Hakan ÖZ, and Yusuf ABDULKADİR ALİ. 2022. “Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel.” European Mechanical Science 6 (1): 39–46. https://doi.org/10.26701/ems.950427.
Harvard
Sulak, M. et al. (2022) ‘Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel’, European Mechanical Science, 6(1), pp. 39–46. doi:10.26701/ems.950427.
IEEE
M. Sulak, V. Onar, A. Işıtan, H. ÖZ, and Y. A. ALİ, “Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel,” European Mechanical Science, vol. 6, no. 1, pp. 39–46, 2022, doi: 10.26701/ems.950427.
BibTeX
@article{sulak2022abrasive,
title = {{Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel}},
author = {Sulak, Mine and Onar, Volkan and Işıtan, Arzum and ÖZ, Hakan and ALİ, Yusuf ABDULKADİR},
journal = {European Mechanical Science},
year = {2022},
volume = {6},
number = {1},
pages = {39--46},
doi = {10.26701/ems.950427},
url = {https://doi.org/10.26701/ems.950427}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Materials Science › Metals and Alloys › Metal Alloys Wear and Properties
- AISI D3 tool steel
- cold work tool steel
- abrasive wear
- tribological properties
- wear loss
- sliding distance
- applied load
- coating wear resistance
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Sulak, M., Onar, V., Işıtan, A., ÖZ, H., & ALİ, Y. A. (2022). Abrasive wear behaviour of nano-TiN coated AISI D3 tool steel. European Mechanical Science, 6(1), 39–46. https://doi.org/10.26701/ems.950427
How many times has this paper been cited?
0 times, according to OpenAlex on 17 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at European Mechanical Science: sign in and open the PDF from this page.
Who wrote this paper?
Mine Sulak, Volkan Onar, Arzum Işıtan, Hakan ÖZ, Yusuf ABDULKADİR ALİ.
What is the DOI of this paper?
10.26701/ems.950427, permanently at https://doi.org/10.26701/ems.950427. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 17 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.