Journal article · 2016 · Open access

A Study on the Temperature of Ohmic Contact to p-Type SiC Based on Ti3SiC2Phase

Tony Abi-Tannous, Maher Soueidan, Gabriel Ferro, M. Lazar, Christophe Raynaud, Bérangère Toury, Marie France Beaufort, J. F. Barbot, Olivier Dezellus, Dominique Planson

IEEE Transactions on Electron Devices, 63(6), 2462–2468 · Published 3 May 2016 · DOI 10.1109/ted.2016.2556725

Open PDFView at the publisherCite this paper

In brief

“A Study on the Temperature of Ohmic Contact to p-Type SiC Based on Ti3SiC2Phase” is a 2016 journal article by Tony Abi-Tannous and 9 co-authors, published in IEEE Transactions on Electron Devices. OpenAlex counts 41 citations as of 21 November 2026. It is open access: the full text is free to read at HAL.

Citations
41
Most cited in
2021 (9)
Field-weighted impact
0.87
References
31
Authors
10

Abstract

In this paper, the electrical properties of Ti3SiC2-based ohmic contacts formed on p-type 4H-SiC were studied. The growth of Ti3SiC2thin films were studied onto 4H-SiC substrates by thermal annealing of Ti-Al layers deposited by magnetron sputtering. In this study, we varied the concentrations of Ti and Al (Ti20Al80, Ti30Al70, Ti50Al50, and Ti), and the annealing temperature from 900 °C to 1200 °C for each concentration. X-ray diffraction and transmission electron microscopy analyzes were performed on the samples to determine the microstructure of the annealed layers and to further investigate the compounds formed after annealing. Using the transfer length method structures, the specific contact resistance (SCR) at room temperature of all contacts was measured. The temperature dependence up to 600 °C of the SCR of the best contacts was studied to understand the current mechanisms at the Ti3SiC2/SiC interface. The experimental results are in agreement with the thermionic field emission theory. With this model, the barrier height of the contact varies between 0.71 and 0.85 eV. Finally, ageing tests showed that Ti3SiC2-based contacts were stable and reliable up to 400 h at 600 °C under Ar.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Abi-Tannous, T., Soueidan, M., Ferro, G., Lazar, M., Raynaud, C., Toury, B., Beaufort, M. F., Barbot, J. F., Dezellus, O., & Planson, D. (2016). A Study on the Temperature of Ohmic Contact to p-Type SiC Based on Ti3SiC2Phase. IEEE Transactions on Electron Devices, 63(6), 2462–2468. https://doi.org/10.1109/ted.2016.2556725

MLA 9

Abi-Tannous, Tony, et al. “A Study on the Temperature of Ohmic Contact to p-Type SiC Based on Ti3SiC2Phase.” IEEE Transactions on Electron Devices, vol. 63, no. 6, 2016, pp. 2462–2468. https://doi.org/10.1109/ted.2016.2556725.

Chicago

Abi-Tannous, Tony, Maher Soueidan, Gabriel Ferro, M. Lazar, Christophe Raynaud, Bérangère Toury, Marie France Beaufort, J. F. Barbot, Olivier Dezellus, and Dominique Planson. 2016. “A Study on the Temperature of Ohmic Contact to p-Type SiC Based on Ti3SiC2Phase.” IEEE Transactions on Electron Devices 63 (6): 2462–2468. https://doi.org/10.1109/ted.2016.2556725.

Harvard

Abi-Tannous, T. et al. (2016) ‘A Study on the Temperature of Ohmic Contact to p-Type SiC Based on Ti3SiC2Phase’, IEEE Transactions on Electron Devices, 63(6), pp. 2462–2468. doi:10.1109/ted.2016.2556725.

IEEE

T. Abi-Tannous et al., “A Study on the Temperature of Ohmic Contact to p-Type SiC Based on Ti3SiC2Phase,” IEEE Transactions on Electron Devices, vol. 63, no. 6, pp. 2462–2468, 2016, doi: 10.1109/ted.2016.2556725.

BibTeX

@article{abitannous2016study,
  title     = {{A Study on the Temperature of Ohmic Contact to p-Type SiC Based on Ti3SiC2Phase}},
  author    = {Abi-Tannous, Tony and Soueidan, Maher and Ferro, Gabriel and Lazar, M. and Raynaud, Christophe and Toury, Bérangère and Beaufort, Marie France and Barbot, J. F. and Dezellus, Olivier and Planson, Dominique},
  journal   = {IEEE Transactions on Electron Devices},
  year      = {2016},
  volume    = {63},
  number    = {6},
  pages     = {2462--2468},
  doi       = {10.1109/ted.2016.2556725},
  url       = {https://doi.org/10.1109/ted.2016.2556725}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201611
201733
201833
201933
202044
202199
202244
202488
202544
202622

Its field-weighted citation impact is 0.87: it has been cited 0.87 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Semiconductor materials and interfaces

  • Ti3SiC2
  • ohmic contacts
  • silicon carbide
  • specific contact resistance
  • temperature dependence
  • thermionic field emission
  • contact barrier height
  • annealing

Work with this paper

Most-cited papers in Materials Science

All highly cited Materials Science papers

Questions about this paper

How do I cite this paper in APA style?

Abi-Tannous, T., Soueidan, M., Ferro, G., Lazar, M., Raynaud, C., Toury, B., Beaufort, M. F., Barbot, J. F., Dezellus, O., & Planson, D. (2016). A Study on the Temperature of Ohmic Contact to p-Type SiC Based on Ti3SiC2Phase. IEEE Transactions on Electron Devices, 63(6), 2462–2468. https://doi.org/10.1109/ted.2016.2556725

How many times has this paper been cited?

41 times, according to OpenAlex on 21 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at HAL: sign in and open the PDF from this page.

Who wrote this paper?

Tony Abi-Tannous, Maher Soueidan, Gabriel Ferro, M. Lazar, Christophe Raynaud, Bérangère Toury, Marie France Beaufort, J. F. Barbot, Olivier Dezellus, Dominique Planson.

What is the DOI of this paper?

10.1109/ted.2016.2556725, permanently at https://doi.org/10.1109/ted.2016.2556725. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 21 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.