Report · 1990 · Open access
A study of the chemical, mechanical, and surface properties of thin films of hydrogenated amorphous carbon
OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Published 1 July 1990 · DOI 10.2172/6637587
In brief
“A study of the chemical, mechanical, and surface properties of thin films of hydrogenated amorphous carbon” is a 1990 report by G.J. Vandentop, published in OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information). OpenAlex counts 0 citations as of 16 November 2026. It is open access: the full text is free to read at OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information).
- Citations
- 0
- Authors
- 1
Abstract
Amorphous hydrogenated carbon (a-C:H) films were studied with the objective of elucidating the nucleation and growth mechanisms, and the origin of their unique physical properties. The films were deposited onto Si(100) substrates both on the powered (negatively self-biased) and on the grounded electrodes from methane in an rf plasma (13.56 MHz) at 65 mTorr and 300 to 370 K. The films produced at the powered electrode exhibited superior mechanical properties, such as high hardness. A mass spectrometer was used to identify neutral species and positive ions incident on the electrodes from the plasma, and also to measure ion energies. The effect of varying ion energy flux on the properties of a-C:H films was investigated using a novel pulsed biasing technique. It was demonstrated that ions were not the dominant deposition species as the total ion flux measured was insufficient to account for the observed deposition rate. The interface between thin films of a-C:H and silicon substrates was investigated using angle resolved x-ray photoelectron spectroscopy. A silicon carbide layer was detected at the interface of a hard a-C:H film formed at the powered electrode. At the grounded electrode, where the kinetic energy is low, no interfacial carbide layer was observed. Scanning tunneling microscopy and high energy electron energy loss spectroscopy was used to investigate the initial stages of growth of a-C:H films. On graphite substrates, films formed at the powered electrode were observed to nucleate in clusters approximately 50 {Angstrom} in diameter, while at the grounded electrode no cluster formation was observed. 58 figs.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Vandentop, G. (1990). A study of the chemical, mechanical, and surface properties of thin films of hydrogenated amorphous carbon. OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information). https://doi.org/10.2172/6637587
MLA 9
Vandentop, G.J. “A study of the chemical, mechanical, and surface properties of thin films of hydrogenated amorphous carbon.” OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information), 1990. https://doi.org/10.2172/6637587.
Chicago
Vandentop, G.J. 1990. “A study of the chemical, mechanical, and surface properties of thin films of hydrogenated amorphous carbon.” OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information). https://doi.org/10.2172/6637587.
Harvard
Vandentop, G. (1990) ‘A study of the chemical, mechanical, and surface properties of thin films of hydrogenated amorphous carbon’, OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information). doi:10.2172/6637587.
IEEE
G. Vandentop, “A study of the chemical, mechanical, and surface properties of thin films of hydrogenated amorphous carbon,” OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information), 1990, doi: 10.2172/6637587.
BibTeX
@article{vandentop1990study,
title = {{A study of the chemical, mechanical, and surface properties of thin films of hydrogenated amorphous carbon}},
author = {Vandentop, G.J.},
journal = {OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information)},
year = {1990},
doi = {10.2172/6637587},
url = {https://doi.org/10.2172/6637587}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Materials Science › Materials Chemistry › Diamond and Carbon-based Materials Research
- hydrogenated amorphous carbon
- a-C:H thin films
- nucleation and growth
- ion energy flux
- film-substrate interface
- cluster nucleation
- film hardness
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
Vandentop, G. (1990). A study of the chemical, mechanical, and surface properties of thin films of hydrogenated amorphous carbon. OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information). https://doi.org/10.2172/6637587
How many times has this paper been cited?
0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access: read the free full text at OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information).
Who wrote this paper?
G.J. Vandentop.
What is the DOI of this paper?
10.2172/6637587. The permanent link is https://doi.org/10.2172/6637587.
Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.