Journal article · 2025 · Open access
A Soft Reconfigurable Inverted Climbing Robot Based on Magneto-Elastica-Reinforced Elastomer
Micromachines, 16(8), 855 · Published 25 July 2025 · DOI 10.3390/mi16080855
In brief
“A Soft Reconfigurable Inverted Climbing Robot Based on Magneto-Elastica-Reinforced Elastomer” is a 2025 journal article by Fuwen Hu and 2 co-authors, published in Micromachines. OpenAlex counts 2 citations as of 22 November 2026, which puts it in the top 6% of works published in 2025 by citations. It is open access under a CC BY licence: the full text is free to read at Micromachines.
- Citations
- 2
- Most cited in
- 2026 (2)
- Field-weighted impact
- 0.35
- References
- 46
- Authors
- 3
Abstract
This work presents a novel type of soft reconfigurable mobile robot with multimodal locomotion, which is created using a controllable magneto-elastica-reinforced composite elastomer. The rope motor-driven method is employed to modulate magnetics-mechanics coupling effects and enable the magneto-elastica-reinforced elastomer actuator to produce controllable deformations. Furthermore, the 3D-printed magneto-elastica-reinforced elastomer actuators are assembled into several typical robotic patterns: linear configuration, parallel configuration, and triangular configuration. As a proof of concept, a few of the basic locomotive modes are demonstrated including squirming-type crawling at a speed of 1.11 mm/s, crawling with turning functions at a speed of 1.11 mm/s, and omnidirectional crawling at a speed of 1.25 mm/s. Notably, the embedded magnetic balls produce magnetic adhesion on the ferromagnetic surfaces, which enables the soft mobile robot to climb upside-down on ferromagnetic curved surfaces. In the experiment, the inverted ceiling-based inverted crawling speed is 2.17 mm/s, and the inverted freeform surface-based inverted crawling speed is 3.40 mm/s. As indicated by the experimental results, the proposed robot has the advantages of a simple structure, low cost, reconfigurable multimodal motion ability, and so on, and has potential application in the inspection of high-value assets and operations in confined environments.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Hu, F., Zhao, B., & Jiang, W. (2025). A Soft Reconfigurable Inverted Climbing Robot Based on Magneto-Elastica-Reinforced Elastomer. Micromachines, 16(8), 855. https://doi.org/10.3390/mi16080855
MLA 9
Hu, Fuwen, et al. “A Soft Reconfigurable Inverted Climbing Robot Based on Magneto-Elastica-Reinforced Elastomer.” Micromachines, vol. 16, no. 8, 2025, p. 855. https://doi.org/10.3390/mi16080855.
Chicago
Hu, Fuwen, Bingyu Zhao, and Wenyu Jiang. 2025. “A Soft Reconfigurable Inverted Climbing Robot Based on Magneto-Elastica-Reinforced Elastomer.” Micromachines 16 (8): 855. https://doi.org/10.3390/mi16080855.
Harvard
Hu, F., Zhao, B. and Jiang, W. (2025) ‘A Soft Reconfigurable Inverted Climbing Robot Based on Magneto-Elastica-Reinforced Elastomer’, Micromachines, 16(8), p. 855. doi:10.3390/mi16080855.
IEEE
F. Hu, B. Zhao, and W. Jiang, “A Soft Reconfigurable Inverted Climbing Robot Based on Magneto-Elastica-Reinforced Elastomer,” Micromachines, vol. 16, no. 8, p. 855, 2025, doi: 10.3390/mi16080855.
BibTeX
@article{hu2025soft,
title = {{A Soft Reconfigurable Inverted Climbing Robot Based on Magneto-Elastica-Reinforced Elastomer}},
author = {Hu, Fuwen and Zhao, Bingyu and Jiang, Wenyu},
journal = {Micromachines},
year = {2025},
volume = {16},
number = {8},
pages = {855},
doi = {10.3390/mi16080855},
url = {https://doi.org/10.3390/mi16080855}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- magnetic adhesion
- multimodal locomotion
- 3D-printed actuators
- ferromagnetic surfaces
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Hu, F., Zhao, B., & Jiang, W. (2025). A Soft Reconfigurable Inverted Climbing Robot Based on Magneto-Elastica-Reinforced Elastomer. Micromachines, 16(8), 855. https://doi.org/10.3390/mi16080855
How many times has this paper been cited?
2 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Micromachines: sign in and open the PDF from this page.
Who wrote this paper?
Fuwen Hu, Bingyu Zhao, Wenyu Jiang.
What is the DOI of this paper?
10.3390/mi16080855, permanently at https://doi.org/10.3390/mi16080855. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.