Journal article · 2014 · Open access

A simple method for the assessment of the contact modulus for coated systems

Steve J Bull

The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, 95(16-18), 1907–1927 · Published 8 May 2014 · DOI 10.1080/14786435.2014.909612

Open full textView at the publisherCite this paper

In brief

“A simple method for the assessment of the contact modulus for coated systems” is a 2014 journal article by Steve J Bull, published in The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics. OpenAlex counts 21 citations as of 19 November 2026. It is open access under a CC BY-NC licence: the full text is free to read at Newcastle University ePrints (Newcastle Univesity).

Citations
21
Most cited in
2014 (3)
Field-weighted impact
2.22
References
12
Authors
1

Abstract

This paper describes a simple method to determine the elastic modulus of a coating on a substrate using nanoindentation based on the load support of a truncated cone of material beneath the indenter. The cone angle is shown to be 32.48° in all cases. The effect of the coating on the measured contact modulus increases more rapidly as the contact scale is reduced. The model describes the behaviour of a range of coating substrate systems very well, but deviations are observed in cases where pile-up or tip end-shape variations affect the experimental data. It is possible to use a fit of a simplified form of the model to experimental data for coatings on stiff substrates to determine the elastic properties of the coating independent of the substrate. The model can be generalized for multilayer coatings; this is essential when compliant coating layers are sandwiched between stiffer layers. The model shows that the mechanical properties of thin stiff coatings on compliant substrates cannot be successfully determined from indentation data. The ISO14577 extrapolation method should therefore not be used in such circumstances.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Bull, S. J. (2014). A simple method for the assessment of the contact modulus for coated systems. The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, 95(16-18), 1907–1927. https://doi.org/10.1080/14786435.2014.909612

MLA 9

Bull, Steve J. “A simple method for the assessment of the contact modulus for coated systems.” The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, vol. 95, no. 16-18, 2014, pp. 1907–1927. https://doi.org/10.1080/14786435.2014.909612.

Chicago

Bull, Steve J. 2014. “A simple method for the assessment of the contact modulus for coated systems.” The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics 95 (16-18): 1907–1927. https://doi.org/10.1080/14786435.2014.909612.

Harvard

Bull, S. J. (2014) ‘A simple method for the assessment of the contact modulus for coated systems’, The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, 95(16-18), pp. 1907–1927. doi:10.1080/14786435.2014.909612.

IEEE

S. J. Bull, “A simple method for the assessment of the contact modulus for coated systems,” The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, vol. 95, no. 16-18, pp. 1907–1927, 2014, doi: 10.1080/14786435.2014.909612.

BibTeX

@article{bull2014simple,
  title     = {{A simple method for the assessment of the contact modulus for coated systems}},
  author    = {Bull, Steve J},
  journal   = {The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics},
  year      = {2014},
  volume    = {95},
  number    = {16-18},
  pages     = {1907--1927},
  doi       = {10.1080/14786435.2014.909612},
  url       = {https://doi.org/10.1080/14786435.2014.909612}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201433
201522
201733
201811
201933
202011
202133
202222
202411
202511

Its field-weighted citation impact is 2.22: it has been cited 2.22 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanics of Materials › Metal and Thin Film Mechanics

  • coated systems
  • nanoindentation
  • cone angle
  • pile-up
  • multilayer coatings
  • compliant substrates
  • coating-substrate interface

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Bull, S. J. (2014). A simple method for the assessment of the contact modulus for coated systems. The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, 95(16-18), 1907–1927. https://doi.org/10.1080/14786435.2014.909612

How many times has this paper been cited?

21 times, according to OpenAlex on 19 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Newcastle University ePrints (Newcastle Univesity): sign in and open the full text from this page.

Who wrote this paper?

Steve J Bull.

What is the DOI of this paper?

10.1080/14786435.2014.909612, permanently at https://doi.org/10.1080/14786435.2014.909612. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 19 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.