Journal article · 2022 · Open access

A simple manufacturing process of the miniaturised octopus-inspired underwater soft robotic grippers

Murat Eroğlu, Ebru Devrim Şam Parmak

Journal of Adhesion Science and Technology, 37(7), 1163–1176 · Published 24 February 2022 · DOI 10.1080/01694243.2022.2043056

Open full textView at the publisherCite this paper

In brief

“A simple manufacturing process of the miniaturised octopus-inspired underwater soft robotic grippers” is a 2022 journal article by Murat Eroğlu and Ebru Devrim Şam Parmak, published in Journal of Adhesion Science and Technology. OpenAlex counts 13 citations as of 22 November 2026, which puts it in the top 6% of works published in 2022 by citations. It is open access under a CC BY-NC-ND licence: the full text is free to read at Bursa Technical University Institutional Repository.

Citations
13
Most cited in
2024 (4)
Field-weighted impact
0.67
References
21
Authors
2

Abstract

In this article, we show a new fabrication technique based on CNC machining for the miniaturised octopus-inspired underwater soft robotic grippers. This method provides practical and scale-up production of these grippers. Polydimethylsiloxane/polyethylene terephthalate (PDMS/PET) film (∼7 × 7 cm2) consisting of concave structures in two different geometries (outer and inner) with the suction-based property was produced by using our suggested manufacturing method. The highest adhesion force was obtained on the flat deformable object by the outer concave structured gripper (∼6 kPa) and the flat rigid object by the inner concave structured gripper (∼12 kPa). Moreover, both the grippers exhibit switchable adhesion by changing the retraction velocity as well as high repeatability (over 100 cycles) in underwater conditions. This method will enable practical fabrication of the miniaturised octopus-inspired underwater soft robotic grippers. The proposed manufacturing technique will facilitate the widespread use and commercialisation of the grippers.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Eroğlu, M., & Parmak, E. D. Ş. (2022). A simple manufacturing process of the miniaturised octopus-inspired underwater soft robotic grippers. Journal of Adhesion Science and Technology, 37(7), 1163–1176. https://doi.org/10.1080/01694243.2022.2043056

MLA 9

Eroğlu, Murat, and Ebru Devrim Şam Parmak. “A simple manufacturing process of the miniaturised octopus-inspired underwater soft robotic grippers.” Journal of Adhesion Science and Technology, vol. 37, no. 7, 2022, pp. 1163–1176. https://doi.org/10.1080/01694243.2022.2043056.

Chicago

Eroğlu, Murat and Ebru Devrim Şam Parmak. 2022. “A simple manufacturing process of the miniaturised octopus-inspired underwater soft robotic grippers.” Journal of Adhesion Science and Technology 37 (7): 1163–1176. https://doi.org/10.1080/01694243.2022.2043056.

Harvard

Eroğlu, M. and Parmak, E. D. Ş. (2022) ‘A simple manufacturing process of the miniaturised octopus-inspired underwater soft robotic grippers’, Journal of Adhesion Science and Technology, 37(7), pp. 1163–1176. doi:10.1080/01694243.2022.2043056.

IEEE

M. Eroğlu and E. D. Ş. Parmak, “A simple manufacturing process of the miniaturised octopus-inspired underwater soft robotic grippers,” Journal of Adhesion Science and Technology, vol. 37, no. 7, pp. 1163–1176, 2022, doi: 10.1080/01694243.2022.2043056.

BibTeX

@article{eroglu2022simple,
  title     = {{A simple manufacturing process of the miniaturised octopus-inspired underwater soft robotic grippers}},
  author    = {Eroğlu, Murat and Parmak, Ebru Devrim Şam},
  journal   = {Journal of Adhesion Science and Technology},
  year      = {2022},
  volume    = {37},
  number    = {7},
  pages     = {1163--1176},
  doi       = {10.1080/01694243.2022.2043056},
  url       = {https://doi.org/10.1080/01694243.2022.2043056}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202333
202444
202544
202622

Its field-weighted citation impact is 0.67: it has been cited 0.67 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • miniaturization
  • switchable adhesion
  • adhesion force
  • scale-up manufacturing

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Eroğlu, M., & Parmak, E. D. Ş. (2022). A simple manufacturing process of the miniaturised octopus-inspired underwater soft robotic grippers. Journal of Adhesion Science and Technology, 37(7), 1163–1176. https://doi.org/10.1080/01694243.2022.2043056

How many times has this paper been cited?

13 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Bursa Technical University Institutional Repository: sign in and open the full text from this page.

Who wrote this paper?

Murat Eroğlu, Ebru Devrim Şam Parmak.

What is the DOI of this paper?

10.1080/01694243.2022.2043056, permanently at https://doi.org/10.1080/01694243.2022.2043056. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.