Book chapter · 2010 · Open access

a-Si:H TFT and Pixel Structure for AMOLED on Flexible Metal Substrate

Chang Young Wook, Chang Dong, In Jae

Sciyo eBooks · Published 18 August 2010 · DOI 10.5772/9891

Free PDFView at the publisherCite this paper

In brief

“a-Si:H TFT and Pixel Structure for AMOLED on Flexible Metal Substrate” is a 2010 book chapter by Chang Young Wook and 2 co-authors, published in Sciyo eBooks. OpenAlex counts 0 citations as of 16 November 2026. It is open access under a CC BY-NC-SA licence: the full text is free to read at Sciyo eBooks.

Citations
0
References
25
Authors
3

Abstract

Organic Light Emitting Diode 1562. Electrical performances of a-Si:H TFT fabricated on a metal foil 2.1 Fabrication of a-Si:H TFT on a metal foil Metal foils have potential advantage over plastic.They tolerate high temperature processes in contrast to glass and even more to plastics.They also have much better dimensional stability because the metal foils have higher elastic modulus (~200 GPa), and lower coefficient of thermal expansion (~10 ppm/°C).However, flexible metal foil substrates do not easily process with traditional TFT equipments such as stepper, PECVD, and etchers that are compatible with rigid glass substrates.To utilize traditional TFT equipments, a flexible metal foil substrate can bond to a rigid glass plate.In this case, the adhesive used for bonding the metal foil to a rigid glass plate reduces the maximum process temperature from the value that the substrate itself would withstand.The adhesive covered on the rigid glass plate and 76-µm-thick metal foil was stuck on them.A spin-on polymer (SOP) or spin-on glass (SOG) as an initial surface planarization spread on a metal foil substrate in order to reduce the surface roughness of the metal substrate.200nm-thick silicon nitride (SiNx) formed by plasma-enhanced chemical vapor deposition (PECVD).This layer insulates electrically TFT layers from metal substrate.The electrical insulation layer also served as the mechanical bond between the TFT layers and the substrate.The root-mean-square (RMS) roughness of the metal foil substrate after planarization was 5 nm.The structure of the a-Si:H TFT was an inverted staggered-type structure, which was fabricated by a conventional five-mask process.The flexible metal substrate carrying TFT array separated from the rigid glass plate.To protect mechanical stress from being able to degrade the electrical performance of a-Si:H TFT, the adhesive between the metal foil and the glass plate was softened by chemical before separation.The performance of TFT did not change before and after separation the flexible metal substrate carrying TFT array from the rigid glass plate.Fig. 1 shows a cross section of a-Si:H TFT, which was fabricated on flexible metal foil.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Wook, C. Y., Dong, C., & Jae, I. (2010). a-Si:H TFT and Pixel Structure for AMOLED on Flexible Metal Substrate. Sciyo eBooks. https://doi.org/10.5772/9891

MLA 9

Wook, Chang Young, et al. “a-Si:H TFT and Pixel Structure for AMOLED on Flexible Metal Substrate.” Sciyo eBooks, 2010. https://doi.org/10.5772/9891.

Chicago

Wook, Chang Young, Chang Dong, and In Jae. 2010. “a-Si:H TFT and Pixel Structure for AMOLED on Flexible Metal Substrate.” Sciyo eBooks. https://doi.org/10.5772/9891.

Harvard

Wook, C. Y., Dong, C. and Jae, I. (2010) ‘a-Si:H TFT and Pixel Structure for AMOLED on Flexible Metal Substrate’, Sciyo eBooks. doi:10.5772/9891.

IEEE

C. Y. Wook, C. Dong, and I. Jae, “a-Si:H TFT and Pixel Structure for AMOLED on Flexible Metal Substrate,” Sciyo eBooks, 2010, doi: 10.5772/9891.

BibTeX

@incollection{wook2010pixel,
  title     = {{a-Si:H TFT and Pixel Structure for AMOLED on Flexible Metal Substrate}},
  author    = {Wook, Chang Young and Dong, Chang and Jae, In},
  booktitle = {Sciyo eBooks},
  year      = {2010},
  doi       = {10.5772/9891},
  url       = {https://doi.org/10.5772/9891}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Electrical and Electronic Engineering › Thin-Film Transistor Technologies

  • AMOLED displays
  • pixel structure
  • flexible electronics

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Wook, C. Y., Dong, C., & Jae, I. (2010). a-Si:H TFT and Pixel Structure for AMOLED on Flexible Metal Substrate. Sciyo eBooks. https://doi.org/10.5772/9891

How many times has this paper been cited?

0 times, according to OpenAlex on 16 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access: read the free full text at Sciyo eBooks.

Who wrote this paper?

Chang Young Wook, Chang Dong, In Jae.

What is the DOI of this paper?

10.5772/9891. The permanent link is https://doi.org/10.5772/9891.

Bibliographic data from OpenAlex (CC0), last checked 16 November 2026. ResearchGuru does not host this paper; the links go to the publisher or the repository that does.