Conference paper · 2026 · Open access

A performance–density map–guided lightweight infilling design method for lattice structures

Jing Zhang, Xiaodong Liu, Shuyu Zhou, Shan Li, Bingshan Liu

Journal of Physics Conference Series, 3221(1), 012075 · Published 1 April 2026 · DOI 10.1088/1742-6596/3221/1/012075

Open PDFView at the publisherCite this paper

In brief

“A performance–density map–guided lightweight infilling design method for lattice structures” is a 2026 conference paper by Jing Zhang and 4 co-authors, published in Journal of Physics Conference Series. OpenAlex counts 0 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Journal of Physics Conference Series.

Citations
0
References
7
Authors
5

Abstract

This study conducts a systematic investigation of four representative truss-based lattice structures (SC, RBCC, CB, and BCC) and analyzes their tensile and shear mechanical responses across different volume densities. The numerical results reveal pronounced topology dependence and density sensitivity in lattice performance. The SC lattice exhibits the highest stiffness and the smallest deformation under both loading conditions. The BCC lattice shows the largest strain in the low-to-medium density range due to bending–torsion coupling in its inclined struts. The CB and RBCC lattices display comparable overall performance, with the CB configuration performing slightly better owing to its more uniform load-transfer pathways. To validate the accuracy of the numerical model, uniaxial tensile tests were conducted on SC and BCC specimens with a volume density of 0.44. The experimentally measured ratio of equivalent elastic moduli closely matches the numerical predictions, confirming the model’s ability to capture the topology-dependent load-bearing mechanisms. Based on the simulation results, performance–density maps incorporating volume density, global deformation, and local stress metrics were constructed. In addition, a multi-constraint lightweight lattice-design method was proposed. This method enables the determination of the minimum feasible lattice density and the corresponding optimal topology under simultaneous strength, stiffness, and volume constraints. The proposed approach provides an intuitive, efficient, and generalizable framework for lattice selection and infill design. Overall, this work offers a reliable theoretical foundation and methodological support for lightweight design, multiscale optimization, and additive manufacturing of lattice structures.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Zhang, J., Liu, X., Zhou, S., Li, S., & Liu, B. (2026). A performance–density map–guided lightweight infilling design method for lattice structures. Journal of Physics Conference Series, 3221(1), 012075. https://doi.org/10.1088/1742-6596/3221/1/012075

MLA 9

Zhang, Jing, et al. “A performance–density map–guided lightweight infilling design method for lattice structures.” Journal of Physics Conference Series, vol. 3221, no. 1, 2026, p. 012075. https://doi.org/10.1088/1742-6596/3221/1/012075.

Chicago

Zhang, Jing, Xiaodong Liu, Shuyu Zhou, Shan Li, and Bingshan Liu. 2026. “A performance–density map–guided lightweight infilling design method for lattice structures.” Journal of Physics Conference Series 3221 (1): 012075. https://doi.org/10.1088/1742-6596/3221/1/012075.

Harvard

Zhang, J. et al. (2026) ‘A performance–density map–guided lightweight infilling design method for lattice structures’, Journal of Physics Conference Series, 3221(1), p. 012075. doi:10.1088/1742-6596/3221/1/012075.

IEEE

J. Zhang, X. Liu, S. Zhou, S. Li, and B. Liu, “A performance–density map–guided lightweight infilling design method for lattice structures,” Journal of Physics Conference Series, vol. 3221, no. 1, p. 012075, 2026, doi: 10.1088/1742-6596/3221/1/012075.

BibTeX

@inproceedings{zhang2026performance,
  title     = {{A performance–density map–guided lightweight infilling design method for lattice structures}},
  author    = {Zhang, Jing and Liu, Xiaodong and Zhou, Shuyu and Li, Shan and Liu, Bingshan},
  booktitle = {Journal of Physics Conference Series},
  year      = {2026},
  volume    = {3221},
  number    = {1},
  pages     = {012075},
  doi       = {10.1088/1742-6596/3221/1/012075},
  url       = {https://doi.org/10.1088/1742-6596/3221/1/012075}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Cellular and Composite Structures

  • lattice structures
  • lightweight design
  • infill design
  • body-centered cubic lattice
  • tensile response
  • shear response
  • volume density
  • combined bending and torsion

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Zhang, J., Liu, X., Zhou, S., Li, S., & Liu, B. (2026). A performance–density map–guided lightweight infilling design method for lattice structures. Journal of Physics Conference Series, 3221(1), 012075. https://doi.org/10.1088/1742-6596/3221/1/012075

How many times has this paper been cited?

0 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Journal of Physics Conference Series: sign in and open the PDF from this page.

Who wrote this paper?

Jing Zhang, Xiaodong Liu, Shuyu Zhou, Shan Li, Bingshan Liu.

What is the DOI of this paper?

10.1088/1742-6596/3221/1/012075, permanently at https://doi.org/10.1088/1742-6596/3221/1/012075. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.