Conference paper · 2018 · Open access

A new method to assess the stiffness and rotation capacity of composite joints

Job Duarte da Costa, Renata Obiala, Christoph Odenbreit

International Conference on Advances in Steel-Concrete Composite Structures (ASCCS) · Published 27 June 2018 · DOI 10.4995/asccs2018.2018.7082

Open PDFView at the publisherCite this paper

In brief

“A new method to assess the stiffness and rotation capacity of composite joints” is a 2018 conference paper by Job Duarte da Costa and 2 co-authors, published in International Conference on Advances in Steel-Concrete Composite Structures (ASCCS). OpenAlex counts 1 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at International Conference on Advances in Steel-Concrete Composite Structures (ASCCS).

Citations
1
Most cited in
2019 (1)
Field-weighted impact
0.72
References
5
Authors
3

Abstract

Composite beam-to-column joints in buildings are mostly modelled as pinned joints in order to facilitate the design of the structure. In reality, due to the required reinforcement in the concrete slab, a certain joint rigidity and bending resistance is always available. The real joint behaviour corresponds therefore more to that of a semi-continuous joint. This is not only beneficial for the serviceability limit state but can also be advantageous at ultimate limit state. However, due to the lack of analytical design rules in EN 1994 to verify the rotation capacity of semi-continuous joints, these are commonly modelled as pinned joints, which impedes an efficient design of composite structures. In this context, a research program on the behaviour of composite joints, focusing on the ultimate rotation capacity, was initiated at the University of Luxembourg [1]. The aim was to identify the influence of two major joint components – the reinforced concrete slab and the steelwork connection – on the moment-rotation curves of composite joints under hogging bending moment. An experimental campaign comprising 8 tests on beam-to-column joints was conducted to determine the response of composite joints with variable reinforcement ratio and diameter of reinforcing bars. In addition to the experimental part, an FE model was developed with the software ABAQUS aiming to simulate the behaviour of internal beam-to-column composite joints. In this paper, the 3D finite element model and results of analyses are presented. The FE model has been defined by 3D solid elements with realistic contact definitions and non-linear material laws. The results of the numerical simulations presented a good agreement with the experimental data. Based on the experimental and numerical investigations, the influence of reinforcement and steelwork connection on the structural properties of composite joints is derived. A new analytical method to determine the stiffness and rotation capacity of composite joints is proposed. The accuracy of this new method is confirmed by existing experimental and numerical results.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

da Costa, J. D., Obiala, R., & Odenbreit, C. (2018). A new method to assess the stiffness and rotation capacity of composite joints. International Conference on Advances in Steel-Concrete Composite Structures (ASCCS). https://doi.org/10.4995/asccs2018.2018.7082

MLA 9

da Costa, Job Duarte, et al. “A new method to assess the stiffness and rotation capacity of composite joints.” International Conference on Advances in Steel-Concrete Composite Structures (ASCCS), 2018. https://doi.org/10.4995/asccs2018.2018.7082.

Chicago

da Costa, Job Duarte, Renata Obiala, and Christoph Odenbreit. 2018. “A new method to assess the stiffness and rotation capacity of composite joints.” International Conference on Advances in Steel-Concrete Composite Structures (ASCCS). https://doi.org/10.4995/asccs2018.2018.7082.

Harvard

da Costa, J. D., Obiala, R. and Odenbreit, C. (2018) ‘A new method to assess the stiffness and rotation capacity of composite joints’, International Conference on Advances in Steel-Concrete Composite Structures (ASCCS). doi:10.4995/asccs2018.2018.7082.

IEEE

J. D. da Costa, R. Obiala, and C. Odenbreit, “A new method to assess the stiffness and rotation capacity of composite joints,” International Conference on Advances in Steel-Concrete Composite Structures (ASCCS), 2018, doi: 10.4995/asccs2018.2018.7082.

BibTeX

@inproceedings{dacosta2018method,
  title     = {{A new method to assess the stiffness and rotation capacity of composite joints}},
  author    = {da Costa, Job Duarte and Obiala, Renata and Odenbreit, Christoph},
  booktitle = {International Conference on Advances in Steel-Concrete Composite Structures (ASCCS)},
  year      = {2018},
  doi       = {10.4995/asccs2018.2018.7082},
  url       = {https://doi.org/10.4995/asccs2018.2018.7082}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Topic and keywords

Physical Sciences › Engineering › Civil and Structural Engineering › Structural Load-Bearing Analysis

  • rotation capacity
  • joint stiffness
  • moment-rotation curves
  • finite element analysis
  • analytical design method
  • ultimate limit state
  • serviceability limit state

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

da Costa, J. D., Obiala, R., & Odenbreit, C. (2018). A new method to assess the stiffness and rotation capacity of composite joints. International Conference on Advances in Steel-Concrete Composite Structures (ASCCS). https://doi.org/10.4995/asccs2018.2018.7082

How many times has this paper been cited?

1 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at International Conference on Advances in Steel-Concrete Composite Structures (ASCCS): sign in and open the PDF from this page.

Who wrote this paper?

Job Duarte da Costa, Renata Obiala, Christoph Odenbreit.

What is the DOI of this paper?

10.4995/asccs2018.2018.7082, permanently at https://doi.org/10.4995/asccs2018.2018.7082. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.