Dissertation · 2011 · Open access
A Methodology Towards Comprehensive Evaluation of Shape Memory Alloy Actuators for Prosthetic Finger Design
Arrow - TU Dublin (Technological University Dublin) · Published 1 January 2011 · DOI 10.21427/d71c8b
In brief
“A Methodology Towards Comprehensive Evaluation of Shape Memory Alloy Actuators for Prosthetic Finger Design” is a 2011 dissertation by Kevin O’Toole, published in Arrow - TU Dublin (Technological University Dublin). OpenAlex counts 13 citations as of 22 November 2026. It is open access under a CC BY-NC-SA licence: the full text is free to read at Arrow - TU Dublin (Technological University Dublin).
- Citations
- 13
- Most cited in
- 2017 (4)
- References
- 122
- Authors
- 1
Abstract
Presently, DC motors are the actuator of choice within intelligent upper limb prostheses. However, the weight and dimensions associated with suitable DC motors are not always compatible with the geometric restrictions of a prosthetic hand; reducing available degrees of freedom and ultimately rendering the prosthesis uncomfortable for the end-user. As a result, the search is on-going to find a more appropriate actuation solution that is lightweight, noiseless, strong and cheap. Shape memory alloy (SMA) actuators offer the potential to meet these requirements. To date, no viable upper limb prosthesis using SMA actuators has been developed. The primary reasons lie in low force generation as a result of unsuitable actuator designs, and significant difficulties in control owing to the highly nonlinear response of SMAs when subjected to joule heating. This work presents a novel and comprehensive methodology to facilitate evaluation of SMA bundle actuators for prosthetic finger design. SMA bundle actuators feature multiple SMA wires in parallel. This allows for increased force generation without compromising on dynamic performance. The SMA bundle actuator is tasked with reproducing the typical forces and contractions associated with the human finger in a prosthetic finger design, whilst maintaining a high degree of energy efficiency. A novel approach to SMA control is employed, whereby an adaptive controller is developed and tuned using the underlying thermo-mechanical principles of operation of SMA wires. A mathematical simulation of the kinematics and dynamics of motion provides a platform for designing, optimizing and evaluating suitable SMA bundle actuators offline. This significantly reduces the time and cost involved in implementing an appropriate actuation solution. Experimental results show iii that the performance of SMA bundle actuators is favourable for prosthesis applications. Phalangeal tip forces are shown to improve significantly through bundling of SMA wire actuators, while dynamic performance is maintained owing to the design and implementation of the selected control strategy. The work is intended to serve as a roadmap for fellow researchers seeking to design, implement and control SMA bundle actuators in a prosthesis design. Furthermore, the methodology can also be adopted to serve as a guide in the evaluation of other non-conventional actuation technologies in alternative applications.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
O’Toole, K. (2011). A Methodology Towards Comprehensive Evaluation of Shape Memory Alloy Actuators for Prosthetic Finger Design. Arrow - TU Dublin (Technological University Dublin). https://doi.org/10.21427/d71c8b
MLA 9
O’Toole, Kevin. “A Methodology Towards Comprehensive Evaluation of Shape Memory Alloy Actuators for Prosthetic Finger Design.” Arrow - TU Dublin (Technological University Dublin), 2011. https://doi.org/10.21427/d71c8b.
Chicago
O’Toole, Kevin. 2011. “A Methodology Towards Comprehensive Evaluation of Shape Memory Alloy Actuators for Prosthetic Finger Design.” Arrow - TU Dublin (Technological University Dublin). https://doi.org/10.21427/d71c8b.
Harvard
O’Toole, K. (2011) ‘A Methodology Towards Comprehensive Evaluation of Shape Memory Alloy Actuators for Prosthetic Finger Design’, Arrow - TU Dublin (Technological University Dublin). doi:10.21427/d71c8b.
IEEE
K. O’Toole, “A Methodology Towards Comprehensive Evaluation of Shape Memory Alloy Actuators for Prosthetic Finger Design,” Arrow - TU Dublin (Technological University Dublin), 2011, doi: 10.21427/d71c8b.
BibTeX
@phdthesis{otoole2011methodology,
title = {{A Methodology Towards Comprehensive Evaluation of Shape Memory Alloy Actuators for Prosthetic Finger Design}},
author = {O’Toole, Kevin},
year = {2011},
doi = {10.21427/d71c8b},
url = {https://doi.org/10.21427/d71c8b}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2014 | 1 | |
| 2015 | 1 | |
| 2016 | 1 | |
| 2017 | 4 | |
| 2019 | 4 | |
| 2020 | 1 | |
| 2023 | 1 |
Topic and keywords
Physical Sciences › Materials Science › Materials Chemistry › Shape Memory Alloy Transformations
- shape memory alloy actuators
- prosthetic finger
- upper limb prosthesis
- adaptive control
- thermomechanical modeling
- energy efficiency
Work with this paper
Most-cited papers in Materials Science
- Electric Field Effect in Atomically Thin Carbon FilmsKostya S. Novoselov, Andre K. Geim, Sergey V. Morozov and 5 more · Science · 2004 · 67,474 citations
- Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenidesROBERT D. SHANNON · Acta Crystallographica Section A · 1976 · 66,944 citations
- Ab initio molecular dynamics for liquid metalsGeorg Kresse, J. Häfner · Physical review. B, Condensed matter · 1993 · 46,320 citations
- Helical microtubules of graphitic carbonSumio Iijima · Nature · 1991 · 43,639 citations
- The rise of grapheneAndre K. Geim, Kostya S. Novoselov · Nature Materials · 2007 · 40,328 citations
Questions about this paper
How do I cite this paper in APA style?
O’Toole, K. (2011). A Methodology Towards Comprehensive Evaluation of Shape Memory Alloy Actuators for Prosthetic Finger Design. Arrow - TU Dublin (Technological University Dublin). https://doi.org/10.21427/d71c8b
How many times has this paper been cited?
13 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at Arrow - TU Dublin (Technological University Dublin): sign in and open the PDF from this page.
Who wrote this paper?
Kevin O’Toole.
What is the DOI of this paper?
10.21427/d71c8b, permanently at https://doi.org/10.21427/d71c8b. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.