Paper · 2012 · Open access

A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics

Qiaoling Meng

AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna) · Published 1 January 2012 · DOI 10.6092/unibo/amsdottorato/4734

Open PDFView at the publisherCite this paper

In brief

“A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics” is a 2012 paper by Qiaoling Meng, published in AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna). OpenAlex counts 18 citations as of 22 November 2026. It is open access: the full text is free to read at AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna).

Citations
18
Most cited in
2021 (4)
Field-weighted impact
3.26
References
84
Authors
1

Abstract

Geometric nonlinearities of flexure hinges introduced by large deflections often complicate the analysis of compliant mechanisms containing such members, and therefore, Pseudo-Rigid-Body Models (PRBMs) have been well proposed and developed by Howell [1994] to analyze the characteristics of slender beams under large deflection. These models, however, fail to approximate the characteristics for the deep beams (short beams) or the other flexure hinges. Lobontiu's work [2001] contributed to the diverse flexure hinge analysis building on the assumptions of small deflection, which also limits the application range of these flexure hinges and cannot analyze the stiffness and stress characteristics of these flexure hinges for large deflection. Therefore, the objective of this thesis is to analyze flexure hinges considering both the effects of large-deflection and shear force, which guides the design of flexure-based compliant mechanisms. The main work conducted in the thesis is outlined as follows. 1. Three popular types of flexure hinges: (circular flexure hinges, elliptical flexure hinges and corner-filleted flexure hinges) are chosen for analysis at first. 2. Commercial software (Comsol) based Finite Element Analysis (FEA) method is then used for correcting the errors produced by the equations proposed by Lobontiu when the chosen flexure hinges suffer from large deformation. 3. Three sets of generic design equations for the three types of flexure hinges are further proposed on the basis of stiffness and stress characteristics from the FEA results. 4. A flexure-based four-bar compliant mechanism is finally studied and modeled using the proposed generic design equations. The load-displacement relationships are verified by a numerical example. The results show that a maximum error about the relationship between moment and rotation deformation is less than 3.4% for a flexure hinge, and it is lower than 5% for the four-bar compliant mechanism compared with the FEA results.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Meng, Q. (2012). A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics. AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna). https://doi.org/10.6092/unibo/amsdottorato/4734

MLA 9

Meng, Qiaoling. “A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics.” AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna), 2012. https://doi.org/10.6092/unibo/amsdottorato/4734.

Chicago

Meng, Qiaoling. 2012. “A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics.” AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna). https://doi.org/10.6092/unibo/amsdottorato/4734.

Harvard

Meng, Q. (2012) ‘A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics’, AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna). doi:10.6092/unibo/amsdottorato/4734.

IEEE

Q. Meng, “A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics,” AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna), 2012, doi: 10.6092/unibo/amsdottorato/4734.

BibTeX

@article{meng2012design,
  title     = {{A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics}},
  author    = {Meng, Qiaoling},
  journal   = {AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna)},
  year      = {2012},
  doi       = {10.6092/unibo/amsdottorato/4734},
  url       = {https://doi.org/10.6092/unibo/amsdottorato/4734}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201311
201422
201522
201811
201922
202011
202144
202222
202322
202411

Its field-weighted citation impact is 3.26: it has been cited 3.26 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Civil and Structural Engineering › Topology Optimization in Engineering

  • flexure hinges
  • compliant mechanisms
  • large deflection
  • pseudo-rigid-body model
  • load-displacement curve
  • design equations

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Meng, Q. (2012). A Design Method for Flexure-Based Compliant Mechanisms on the Basis of Stiffness and Stress Characteristics. AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna). https://doi.org/10.6092/unibo/amsdottorato/4734

How many times has this paper been cited?

18 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at AMS Dottorato Institutional Doctoral Theses Repository (University of Bologna): sign in and open the PDF from this page.

Who wrote this paper?

Qiaoling Meng.

What is the DOI of this paper?

10.6092/unibo/amsdottorato/4734, permanently at https://doi.org/10.6092/unibo/amsdottorato/4734. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.