Journal article · 2023 · Open access

A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding

Yunxia Chen, Xu Xiao, Yanjing Liu, Haichao Cui

Materials, 16(6), 2212 · Published 9 March 2023 · DOI 10.3390/ma16062212

Open PDFView at the publisherCite this paper

In brief

“A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding” is a 2023 journal article by Yunxia Chen and 3 co-authors, published in Materials. OpenAlex counts 17 citations as of 22 November 2026. It is open access under a CC BY licence: the full text is free to read at Materials.

Citations
17
Most cited in
2026 (6)
Field-weighted impact
1.50
References
24
Authors
4

Abstract

Welding and the behavior of the weldments are important, since welding of high strength low alloy (HSLA) steels is a conventional method for manufacturing industrial parts. This work conducts a comparative investigation of microstructural characteristics and mechanical properties for joints of 16-mm-thick HSLA Q890 steel produced by multi-layer multi-pass shielded metal arc welding (SMAW) with filler wire and single-layer autogenous laser beam welding (LBW). The mechanical properties of the welded joints were assessed in terms of tensile and impact using butt joints. The results show that tensile failure occurred in the base metal during the tensile tests for most of the trials. The ultimate tensile strength and percent elongation of the LBW welded joint (973.5 MPa and 10%) are higher than those of the SMAW joint (951 MPa and 2.9%) due to the filler filling process of the SMAW process. The Charpy impact energy of the weld metal (16.4 J and 15.1 J) is lower than that of the heat-affected zone (18.5 J and 19.5 J) in the LBW joint and the SMAW joint.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Chen, Y., Xiao, X., Liu, Y., & Cui, H. (2023). A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding. Materials, 16(6), 2212. https://doi.org/10.3390/ma16062212

MLA 9

Chen, Yunxia, et al. “A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding.” Materials, vol. 16, no. 6, 2023, p. 2212. https://doi.org/10.3390/ma16062212.

Chicago

Chen, Yunxia, Xu Xiao, Yanjing Liu, and Haichao Cui. 2023. “A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding.” Materials 16 (6): 2212. https://doi.org/10.3390/ma16062212.

Harvard

Chen, Y. et al. (2023) ‘A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding’, Materials, 16(6), p. 2212. doi:10.3390/ma16062212.

IEEE

Y. Chen, X. Xiao, Y. Liu, and H. Cui, “A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding,” Materials, vol. 16, no. 6, p. 2212, 2023, doi: 10.3390/ma16062212.

BibTeX

@article{chen2023comparative,
  title     = {{A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding}},
  author    = {Chen, Yunxia and Xiao, Xu and Liu, Yanjing and Cui, Haichao},
  journal   = {Materials},
  year      = {2023},
  volume    = {16},
  number    = {6},
  pages     = {2212},
  doi       = {10.3390/ma16062212},
  url       = {https://doi.org/10.3390/ma16062212}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
202311
202455
202555
202666

Its field-weighted citation impact is 1.50: it has been cited 1.50 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses

  • high-strength low-alloy steel
  • shielded metal arc welding
  • laser welding
  • autogenous welding
  • weld microstructure
  • tensile strength
  • Charpy impact energy
  • heat-affected zone

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Chen, Y., Xiao, X., Liu, Y., & Cui, H. (2023). A Comparative Study on Microstructural Characterization of Thick High Strength Low Alloy Steel Weld by Arc Welding and Laser Welding. Materials, 16(6), 2212. https://doi.org/10.3390/ma16062212

How many times has this paper been cited?

17 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

Yes. It is open access at Materials: sign in and open the PDF from this page.

Who wrote this paper?

Yunxia Chen, Xu Xiao, Yanjing Liu, Haichao Cui.

What is the DOI of this paper?

10.3390/ma16062212, permanently at https://doi.org/10.3390/ma16062212. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.