Conference paper · 2017

3D printing of a thin-wall soft and monolithic gripper using fused filament fabrication

Hisham Mohamed Cassim Mohamed Anver, Rahim Mutlu, Gürsel Alıcı

IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 442–447 · Published 1 July 2017 · DOI 10.1109/aim.2017.8014057

View at the publisherCite this paper

In brief

“3D printing of a thin-wall soft and monolithic gripper using fused filament fabrication” is a 2017 conference paper by Hisham Mohamed Cassim Mohamed Anver and 2 co-authors, published in IEEE International Conference on Advanced Intelligent Mechatronics (AIM). OpenAlex counts 49 citations as of 22 November 2026. The publisher's version is not open access, and OpenAlex records no free legal copy.

Citations
49
Most cited in
2024 (9)
Field-weighted impact
6.78
References
29
Authors
3

Abstract

Soft materials have been incorporated in the design of robotic systems particularly as a damper, cover or contact pads. With the emergence of soft robotics, which focuses on robotic devices partially or entirely made of soft materials, robotic systems with high deformability, conformability and biomimicry can be realized. By pushing the limits of low cost… Read the full abstract at the publisher.

Excerpt. This paper is not open access.

Cite this paper

Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.

APA 7

Anver, H. M. C. M., Mutlu, R., & Alıcı, G. (2017). 3D printing of a thin-wall soft and monolithic gripper using fused filament fabrication. IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 442–447. https://doi.org/10.1109/aim.2017.8014057

MLA 9

Anver, Hisham Mohamed Cassim Mohamed, et al. “3D printing of a thin-wall soft and monolithic gripper using fused filament fabrication.” IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2017, pp. 442–447. https://doi.org/10.1109/aim.2017.8014057.

Chicago

Anver, Hisham Mohamed Cassim Mohamed, Rahim Mutlu, and Gürsel Alıcı. 2017. “3D printing of a thin-wall soft and monolithic gripper using fused filament fabrication.” IEEE International Conference on Advanced Intelligent Mechatronics (AIM): 442–447. https://doi.org/10.1109/aim.2017.8014057.

Harvard

Anver, H. M. C. M., Mutlu, R. and Alıcı, G. (2017) ‘3D printing of a thin-wall soft and monolithic gripper using fused filament fabrication’, IEEE International Conference on Advanced Intelligent Mechatronics (AIM), pp. 442–447. doi:10.1109/aim.2017.8014057.

IEEE

H. M. C. M. Anver, R. Mutlu, and G. Alıcı, “3D printing of a thin-wall soft and monolithic gripper using fused filament fabrication,” IEEE International Conference on Advanced Intelligent Mechatronics (AIM), pp. 442–447, 2017, doi: 10.1109/aim.2017.8014057.

BibTeX

@inproceedings{anver2017printing,
  title     = {{3D printing of a thin-wall soft and monolithic gripper using fused filament fabrication}},
  author    = {Anver, Hisham Mohamed Cassim Mohamed and Mutlu, Rahim and Alıcı, Gürsel},
  booktitle = {IEEE International Conference on Advanced Intelligent Mechatronics (AIM)},
  year      = {2017},
  pages     = {442--447},
  doi       = {10.1109/aim.2017.8014057},
  url       = {https://doi.org/10.1109/aim.2017.8014057}
}

Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)

Citations by year

YearCitationsShare of the best year
201711
201855
201977
202044
202188
202277
202344
202499
202533
202611

Its field-weighted citation impact is 6.78: it has been cited 6.78 times as often as the average work of the same field, type and year (1.00 is the world average).

Topic and keywords

Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications

  • soft robotics
  • soft gripper
  • fused deposition modeling
  • compliant fingers
  • bending force
  • low-cost additive manufacturing
  • assistive devices

Work with this paper

Most-cited papers in Engineering

All highly cited Engineering papers

Questions about this paper

How do I cite this paper in APA style?

Anver, H. M. C. M., Mutlu, R., & Alıcı, G. (2017). 3D printing of a thin-wall soft and monolithic gripper using fused filament fabrication. IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 442–447. https://doi.org/10.1109/aim.2017.8014057

How many times has this paper been cited?

49 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.

Is this paper free to read?

OpenAlex records no free legal copy. Check your library's access, the authors' pages or a repository, or ask the corresponding author for a copy.

Who wrote this paper?

Hisham Mohamed Cassim Mohamed Anver, Rahim Mutlu, Gürsel Alıcı.

What is the DOI of this paper?

10.1109/aim.2017.8014057, permanently at https://doi.org/10.1109/aim.2017.8014057. Sign in and open it from this page.

Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.