Conference paper · 2023
3D Printable Origami-Inspired Pneumatic Soft Actuator with Modularized Design
IEEE International Conference on Soft Robotics (RoboSoft), 1–5 · Published 3 April 2023 · DOI 10.1109/robosoft55895.2023.10122063
In brief
“3D Printable Origami-Inspired Pneumatic Soft Actuator with Modularized Design” is a 2023 conference paper by Tatsuya Kako and 4 co-authors, published in IEEE International Conference on Soft Robotics (RoboSoft). OpenAlex counts 6 citations as of 22 November 2026. The publisher's version is not open access, and OpenAlex records no free legal copy.
- Citations
- 6
- Most cited in
- 2024 (4)
- Field-weighted impact
- 2.25
- References
- 21
- Authors
- 5
Abstract
Pneumatic soft actuators are widely used in various applications. Recent years, pneumatic origami actuators were studied intensively because of the advantages of high energy efficiency, large deformation, and rich deformation patterns. However, the fabrication of pneumatic driven origami-based soft robot is a challenging task, in which air leakage can result in disfunction of the robots.… Read the full abstract at the publisher.
Excerpt. This paper is not open access.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Kako, T., Wang, Z., Mori, Y., Zhang, H., & Wang, Z. (2023). 3D Printable Origami-Inspired Pneumatic Soft Actuator with Modularized Design. IEEE International Conference on Soft Robotics (RoboSoft), 1–5. https://doi.org/10.1109/robosoft55895.2023.10122063
MLA 9
Kako, Tatsuya, et al. “3D Printable Origami-Inspired Pneumatic Soft Actuator with Modularized Design.” IEEE International Conference on Soft Robotics (RoboSoft), 2023, pp. 1–5. https://doi.org/10.1109/robosoft55895.2023.10122063.
Chicago
Kako, Tatsuya, Zheng Wang, Yoshiki Mori, Hongying Zhang, and Zhongkui Wang. 2023. “3D Printable Origami-Inspired Pneumatic Soft Actuator with Modularized Design.” IEEE International Conference on Soft Robotics (RoboSoft): 1–5. https://doi.org/10.1109/robosoft55895.2023.10122063.
Harvard
Kako, T. et al. (2023) ‘3D Printable Origami-Inspired Pneumatic Soft Actuator with Modularized Design’, IEEE International Conference on Soft Robotics (RoboSoft), pp. 1–5. doi:10.1109/robosoft55895.2023.10122063.
IEEE
T. Kako, Z. Wang, Y. Mori, H. Zhang, and Z. Wang, “3D Printable Origami-Inspired Pneumatic Soft Actuator with Modularized Design,” IEEE International Conference on Soft Robotics (RoboSoft), pp. 1–5, 2023, doi: 10.1109/robosoft55895.2023.10122063.
BibTeX
@inproceedings{kako2023printable,
title = {{3D Printable Origami-Inspired Pneumatic Soft Actuator with Modularized Design}},
author = {Kako, Tatsuya and Wang, Zheng and Mori, Yoshiki and Zhang, Hongying and Wang, Zhongkui},
booktitle = {IEEE International Conference on Soft Robotics (RoboSoft)},
year = {2023},
pages = {1--5},
doi = {10.1109/robosoft55895.2023.10122063},
url = {https://doi.org/10.1109/robosoft55895.2023.10122063}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Citations by year
| Year | Citations | Share of the best year |
|---|---|---|
| 2024 | 4 | |
| 2025 | 1 | |
| 2026 | 1 |
Its field-weighted citation impact is 2.25: it has been cited 2.25 times as often as the average work of the same field, type and year (1.00 is the world average).
Topic and keywords
Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- soft pneumatic actuators
- 3D printing
- liquid silicone rubber
- soft robotics
- air leakage
- robotic gripper
- grasping
- actuator deformation
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Kako, T., Wang, Z., Mori, Y., Zhang, H., & Wang, Z. (2023). 3D Printable Origami-Inspired Pneumatic Soft Actuator with Modularized Design. IEEE International Conference on Soft Robotics (RoboSoft), 1–5. https://doi.org/10.1109/robosoft55895.2023.10122063
How many times has this paper been cited?
6 times, according to OpenAlex on 22 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
OpenAlex records no free legal copy. Check your library's access, the authors' pages or a repository, or ask the corresponding author for a copy.
Who wrote this paper?
Tatsuya Kako, Zheng Wang, Yoshiki Mori, Hongying Zhang, Zhongkui Wang.
What is the DOI of this paper?
10.1109/robosoft55895.2023.10122063, permanently at https://doi.org/10.1109/robosoft55895.2023.10122063. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 22 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.