Paper · 2010 · Open access
2-D Temperature Distribution in Fluidized Bed Reactors for Synthesizing Trichlorosilane
EU PVSEC, 1503–1505 · Published 1 January 2010 · DOI 10.4229/25theupvsec2010-2cv.1.4
In brief
“2-D Temperature Distribution in Fluidized Bed Reactors for Synthesizing Trichlorosilane” is a 2010 paper by X. Wang and 3 co-authors, published in EU PVSEC. OpenAlex counts 0 citations as of 20 November 2026. It is open access: the full text is free to read at EU PVSEC.
- Citations
- 0
- Authors
- 4
Abstract
The process of trichlorosilane synthesis in fluidized bed reactor (FBR), via hydrochlorination of metallurgical-grade silicon, is usually accompanied with the side-reaction to produce tetrachloride. Many efforts have been devoted to increase the selectivity of desired product (SiHCl3) and reduce the formation of tetrachloride (SiCl4). The two primary reactions involved are both highly exothermic and temperature-sensitive, and the composition of products depends largely on the temperature. However, the temperature distribution during the reaction is often neglected, as FBR is generally considered as temperature homogeneous due to the intense solids mixing and good heat transfer between gas and solids. Actually, for highly exothermic reactions, such as the reaction between metallurgical silicon and hydrogen chloride, the temperature gradient will occur, especially in large-scale reactor. In this case, to further optimize the operation condition and maximize the yield of SiHCl3, the analysis of temperature distribution throughout the reactor is necessary and meaningful for trichlorosilane synthesis. In this study, a two-dimensional temperature model is proposed for synthesizing trichlorosilane in the process of solar-grade polycrystalline silicon production. Based on the mechanisms of non-catalytic gas-solid reactions, the kinetic expression is given to investigate the overall reaction rate of silicon to producing SiHCl3 and SiCl4. Meanwhile, by combing the heat transferred between packed coolant tube and reactants with the heat released by chemical reaction, the temperature profile is deduced in radial and vertical directions. The simulation result shows the efficiency of the model.
Cite this paper
Formatted from the catalogue record. Check names, capitals and page numbers against the paper before you submit.
APA 7
Wang, X., Tang, Z., X., H., & F., G. (2010). 2-D Temperature Distribution in Fluidized Bed Reactors for Synthesizing Trichlorosilane. EU PVSEC, 1503–1505. https://doi.org/10.4229/25theupvsec2010-2cv.1.4
MLA 9
Wang, X., et al. “2-D Temperature Distribution in Fluidized Bed Reactors for Synthesizing Trichlorosilane.” EU PVSEC, 2010, pp. 1503–1505. https://doi.org/10.4229/25theupvsec2010-2cv.1.4.
Chicago
Wang, X., Zilin Tang, Hu, X., and Gao, F. 2010. “2-D Temperature Distribution in Fluidized Bed Reactors for Synthesizing Trichlorosilane.” EU PVSEC: 1503–1505. https://doi.org/10.4229/25theupvsec2010-2cv.1.4.
Harvard
Wang, X. et al. (2010) ‘2-D Temperature Distribution in Fluidized Bed Reactors for Synthesizing Trichlorosilane’, EU PVSEC, pp. 1503–1505. doi:10.4229/25theupvsec2010-2cv.1.4.
IEEE
X. Wang, Z. Tang, H. X., and G. F., “2-D Temperature Distribution in Fluidized Bed Reactors for Synthesizing Trichlorosilane,” EU PVSEC, pp. 1503–1505, 2010, doi: 10.4229/25theupvsec2010-2cv.1.4.
BibTeX
@article{wang2010temperature,
title = {{2-D Temperature Distribution in Fluidized Bed Reactors for Synthesizing Trichlorosilane}},
author = {Wang, X. and Tang, Zilin and X., Hu, and F., Gao,},
journal = {EU PVSEC},
year = {2010},
pages = {1503--1505},
doi = {10.4229/25theupvsec2010-2cv.1.4},
url = {https://doi.org/10.4229/25theupvsec2010-2cv.1.4}
}
Download for a reference manager: BibTeX (.bib) · RIS for Zotero, Mendeley and EndNote (.ris)
Topic and keywords
Physical Sciences › Engineering › Computational Mechanics › Granular flow and fluidized beds
- fluidized bed reactor
- temperature distribution
- reaction kinetics
- selectivity
Work with this paper
Most-cited papers in Engineering
- A Closed‐form Equation for Predicting the Hydraulic Conductivity of Unsaturated SoilsMartinus Th. van Genuchten · Soil Science Society of America Journal · 1980 · 28,197 citations
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsW. C. Oliver, George M. Pharr · Journal of materials research/Pratt's guide to venture capital sources · 1992 · 27,379 citations
- Digital communicationsOwen Bishop · Routledge eBooks · 2007 · 24,890 citations
- The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysisNorden Eh Huang, Zhengwei Shen, Steven R. Long and 6 more · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · 1998 · 24,008 citations
- Numerical Heat Transfer and Fluid FlowSuhas V. Patankar · CRC Press eBooks · 2018 · 23,491 citations
Questions about this paper
How do I cite this paper in APA style?
Wang, X., Tang, Z., X., H., & F., G. (2010). 2-D Temperature Distribution in Fluidized Bed Reactors for Synthesizing Trichlorosilane. EU PVSEC, 1503–1505. https://doi.org/10.4229/25theupvsec2010-2cv.1.4
How many times has this paper been cited?
0 times, according to OpenAlex on 20 November 2026. Google Scholar and Scopus count different sets of sources, so their numbers differ.
Is this paper free to read?
Yes. It is open access at EU PVSEC: sign in and open the full text from this page.
Who wrote this paper?
X. Wang, Zilin Tang, Hu, X., Gao, F..
What is the DOI of this paper?
10.4229/25theupvsec2010-2cv.1.4, permanently at https://doi.org/10.4229/25theupvsec2010-2cv.1.4. Sign in and open it from this page.
Bibliographic data from OpenAlex (CC0), last checked 20 November 2026. ResearchGuru does not host this paper; once you are signed in, the links open it at the publisher or the repository that does.